merc-blue

[merc-blue]

just buy the best and use different ESC profiles to suit. the acceleration was nuts to get to 80kph down the straight.. need a big carpark to really open in up

[merc-blue]

if you want to not use the out put form the RX chip chuck the channel onto a transistor and us that like a switch for the vcc and such of the existing system

[merc-blue]

i dont understand your request.. but i think what you asking is can you use the channel outputs like a switch.. answer is yes.. but with very limited voltage and current for your output

[merc-blue]

70km/h in a 1:18 isnt that quick. the M18 with mambas do a easy 80 (on a radar).. this was on a track so couldnt even push the throttle had t be in full brake before halfway down the straight..

[merc-blue]

wat about
11. thou shalt not race unholy smartech

i think is a very important fact

[merc-blue]

thats hott leon.. also if you want a new antenna tube i got a few.. name ur colour blue or green. because that current one is totaled

[merc-blue]

yeah it can be done. basicaly strip out the new servo and wire the pot and the motor back to the PCB..

[merc-blue]

i saw betty.k posted a reply.. i though. heres trouble.. but i got out reasonalby untouched on that one

[merc-blue]

lol thnx man.. big 18 s.. oh yeah.. you guys who are all anal about people posting personal achivements.. SHOVE IT :clown:
going out for a BIG nite tonite

[merc-blue]

deffintly get a Xray .. you can run them stock with a manba and 6 cell.. if you buuld the diff well.. if you want to be safe you can get ball diffs and CVDs. and it will be 99% indestructable and finaly i you want to try out different cell layouts get a penguin chassis
there are 3 or 4 down in melbourne technicaly there is enought to start a class but wont be recognised by votec. they let our race them vs M03 minis

[merc-blue]

they kinda remind me of somthing REALLY old.. keynce 1:6? cars

[merc-blue]

cool.. im down the beach hopefully this time i will still be concious when the new year comes .. lol i think we hit it abit hard

[merc-blue]

man bithed u just couldnt hold back.. thats ALL bad.. wats worse is you mother telling you where and when you wer conceived

[merc-blue]

yeah.. the final round of the season so there wil be LOTS of people there

[merc-blue]

yeah.. you really cant get a race in while there racing.. although i may be racing :smiley16:

[merc-blue]

guys 12 DEC its a race meet at TFTR

[merc-blue]

yeah ill b there i wont have much else besides my 1:10 to run.. the things so bloody expensive

[merc-blue]

err well.. buy a nelly.. lol nah most people say the 7389s are better

[merc-blue]

digikey.. or try the ausmicro boys (aaron) they may have some around

[merc-blue]

we are that good that all them yanks comming here for help :smiley2: wolcome to the forum

[merc-blue]

yeah if there is a small amount its normal its becasue of the system they use with the loops around a pin kinda like in bcg (so they can turn without being restriced)

[merc-blue]

bassicaly bring anything non nitro 1;28 and up there will probly be some xmods and mini-z’z around a few 1:18s and a few 1:10s as for beer unless cops wanna get you on the fact ur drinking in public (the track is public)

[merc-blue]

sounds like some good development.. my pc wont load up the data sheet but wont the max628 be inefficent? and there for lose the gain you get from running only nchan. i guess you would have already looked at that.. the overdischarge function is a great idea specialy with the amount of cash it costs once u kill a lipo or to but wont that conflict with a standard voltage input.. saying you have a 3v cutoff (depending on the number off lipo cells) then your standard 4 cell config also has a 3v cutoff.. i guess by that stage there 90% dead anway BUT then for anybody who wishes to care (yes som people do look after there cells) for there cells will have to run them through a discharge cycle

[merc-blue]

ok
1/ analogue trims are hard to get rite s be very gentle with them and u will get it going straight as for the glitching pack out the servo pot. and it should stop
2/ this has to do with the weight distrobution being behind the direction of acceleration or sumthing.. so nothing really special there. UNLESS your motor is in backwards and you have servo reversing on.. i havnt looked at many mini-z PCBs but the reverse may be current limited.. and if it is backward.. your foward is reverse and reverse is foward.. if u get wat im sayin

[merc-blue]

thnx for the info cpt obvious… the cpt means captaion .. sorry for the sarcasim but NML uses poor quality materials and really doesnt do anything special.. ask jamiekulhanek about how top shelf NLM stuff is..

[Author]

Posts