peteWah

[peteWah]

Do you want to get to work on a servo gear saver for when you build your new chassis, This would be a good addition…

[peteWah]

Do you want to get to work on a servo gear saver for when you build your new chassis, This would be a good addition…

[peteWah]

I had the misfortune of breaking daves flatmates servo gears on the ESSO…blackeye::evil:
That dodge viper shell of TD’s is 1 solid peice of plastic.:D

[peteWah]

I had the misfortune of breaking daves flatmates servo gears on the ESSO…blackeye::evil:
That dodge viper shell of TD’s is 1 solid peice of plastic.:D

[peteWah]

Im not stupid, I am a jedi master
I know his slang towards these matts being over or just under $8.00 a pop.

[peteWah]

Im not stupid, I am a jedi master
I know his slang towards these matts being over or just under $8.00 a pop.

[peteWah]

Now thats a bit harsh charging by the mil 👿

[peteWah]

Now thats a bit harsh charging by the mil 👿

[peteWah]

I saw this aswell and have been looking for a better faster shot/vid of this thing in action…:smiley2:

[peteWah]

I saw this aswell and have been looking for a better faster shot/vid of this thing in action…:smiley2:

[peteWah]

Well put it in the diary guys :smiley2::D:D

[peteWah]

Well put it in the diary guys :smiley2::D:D

[peteWah]

Merc, have heard of silicone being used for 1:10 cars but never seen the application or process
cheers man

I will have to read that a few more times Kitsune,
If you have done this, then good job :smiley2:
What about heat/water proof bags that are available for 1:10 cars :smiley2:

Thanks again for the info guys
:):D:D:D:smiley2::approve::p

Edited by – peteWah on 25 July 2004 01:02:26

[peteWah]

Merc, have heard of silicone being used for 1:10 cars but never seen the application or process
cheers man

I will have to read that a few more times Kitsune,
If you have done this, then good job :smiley2:
What about heat/water proof bags that are available for 1:10 cars :smiley2:

Thanks again for the info guys
:):D:D:D:smiley2::approve::p

Edited by – peteWah on 25 July 2004 01:02:26

[peteWah]

Quote:

Yeah Kyosho may consider it a mini,but its much closer to a 1:10 in scale and over twice as large as a mini-z/iwaver.

As for the TL01 – ROFLAMO Me too:)

155 Alfa is it _red yes.

Think of what you may be able to fit to this unit aswell as more advanced ESC’s and hot motors and nellys and whatever, Its only in the early stage of it life…RTR out of the box and has a number of adjustments you can do with the chassis itself
Its out of the box fun and you dont have to put it together

I want sombody to tell me the potential-If any of this machine and not tell me that its just a size down from what they or i own already…..
Step out side of the square, disect the car for what it could be and not what you see already…

[peteWah]

Quote:

Big Blue should have locked into an O/S:) Panda, do you remember the company that had all the future braintrust when these things were just getting off the ground. I was thinking Corning for some reason?? Let me know if this rings a bell?

Was it olavettei, However you spell it…

Do you remember the amiga that had i think a sega chip and took cartrige game packs :dead:

Edited by – peteWah on 24 July 2004 22:27:19

[peteWah]

motorola are behind the chips in macs nowadays or is this not so…
Its been so long since i had a look…

[peteWah]

There maybe a total of about 7+ of us coming from sydney, Those of us that go to meadowbank that is…
Not sure about melbourne peeps…
All we need now is a solid date to work with so we can confirm whos in and out
Thanks Kitty

[peteWah]

Kyosho still consider this a mini anyways:smiley2:

[peteWah]

Quote:

at 1:12, why not just go all the way and go 1:10 there seems to be a lot of support + clubs for 1:10, me – I prefer the smaller scales 🙂

Me to, smaller scales ROCK
I already own a 1:10 tamiya TLO1(I know basic but solid and cheep at the time) 97 monte carlo celica and want to get all the hopups for it to make it go faster and handle better 70+kph me hopes :D:D:dead::smiley2:

[peteWah]

Here is a link to Tower hobbies but the price conversion is 179.99 USD = 252.45 AUS not including postage costs, Me thinks…
The link also contains a range of parts for the car in question:smiley2:
http://www2.towerhobbies.com/cgi-bin/wti0097p
Is it worth it:smiley2:

Edited by – peteWah on 24 July 2004 20:54:14

[peteWah]

Yes duDe, 1/12

Just thinking *lauths*, Those of us that normally go down the park go @12
:smiley2::smiley2::D

[peteWah]

The coloured chassis can become brittle And are just for looks….

[peteWah]

Quote:

Pete; get a Z then. Or dont come down. Boring? No Z, tis why. Better surface appears, im there. till then…

NO like i said dave and a Z would help but its not the problem.
:evil::evil::evil:
Its going to meadowbank every single sunday is starting to get boring….
We talk about going to other venues and nothing ever happens and im sick of it.:question:
:evil::evil::evil::evil:

[peteWah]

Quote:

I mean we could book a indoor basketball court, i know one in kellyville reasonably cheap. You can book half court or full court. I’ve seen people book it for karate training but i doubt they will allow us 2 race, skid marks and etc.

That shit will buff out, The floor that is…
keep the idears coming:smiley2:

[Author]

Posts