peteWah
Forum Replies Created
-
AuthorPosts
-
Yes,
There is no difference at all but read the info below and chose the spider you think is going suite you best, I would go for the lead version
And there is a Terminal block option for if you are going to swap motors all the time and unlike the lead version you dont have to solder wires on and of…
Read this for the Bare Board
http://shop.ausmicro.net/product_info.php?cPath=21_24&products_id=250
Read this for the Lead Version
http://shop.ausmicro.net/product_info.php?cPath=21_24&products_id=249
If you look at all the spider options in the Ausmicro shop
You will find the answers there…:smiley2:
Ken,
That dose not answer my question but dont worry for it matters not and makes no difference to me….
Just a bold claim on your part…
:smiley2:Yeah, get those lights on the roof of the H2 working :p
Thanking You,
I at the moment am running 0 offset narrow foams with the
R32 cal on my MR01 and it looks and runs sweet…So if you can find the offset compromise that looks good on the AWD with the R32 i am there…
Autoscales with the wheels to suite the 010 should be there next step instead of selling old 015 and 01 shells and not being able to use the wheels, What if you don’t have a 01 or 015 to put them on ?
It would be a nice stable shell for turbo mini z’s
but not mine,
I want a Massarati for my Z if iWaver ever make 1, Saw 1 in a GT series on Fox recently Running against that S7 Saleen, Ferrari 360 and 575 gt’s, TVR tuscans and Aston Marton DB7’s and my old fav the CR5 Corvette. No Japs here.They all looked so good racing together…
Edited by – peteWah on 08 December 2005 14:22:02
(100th post on topic)
Why make the comparison, The board on the AWD would not be that different except you can plug a computer in to your AD and its FM,
Is that what makes it better ?
You cant say these thing without giving reason ! ! !Next they will have a AWD 010.1 AD :D:smiley2:
This SUX,
Hope a 3rd party company makes the wheels with that 1.7mm offset for my wanted R32 skyline collection…
Is there a offset that is close to that iike say 1.5mm that 1 could run untill kyosho or someone pull there thumbs out of dark places and get with the program.
R32’s Rule and they (KYOSHO) in my eyes/mind were stupid not to accomidate for it…Also, They should bring out special autoscales with the wheels to suite the 010 ?
Im guessing that if we have the Chassis set we are set in that regard but they are all the same wheel style and probally only suite certain body types when it comes to looking ok and that to me is a Grrrrrr.For gods sake its not fair i tell you…
Z beam i’m not sure but am of the knowledge that he just got TODAY a copy of GTA for the psp…
I have not seen the stuff you put on his card but i am sure he is using it because he takes it to work with him…..
I will also let him know of you purchase of gta :p:smiley2:
I may want a hand on 1 of those Aaron, lets talkie :smiley2:
I can, what’s wrong with you…
Remember, Im not most people :D:smiley2:
From Aaron’s mouth, I am not the Author…
So.
The “Spider” can handle up to 20v so that’s not a problem BUT your stock Mini-Z board is deigned to run at a MAX of 6v (4x AAA 1.5v Cells) and typically runs at 4.8v Pumping in 7.2v will likely cause problems with other components.
You are best off running a small regulated supply of 5v for the board if you go LiPo. ph2t is working on (around baby production) on a version of the Whoa Nelly that offers a regulated supply etc to run with LiPo installations safely.
Also if you’re considering going for more voltage than 7.2v (14.4?) you’ll probably want to investigate using motors built for 12v not the “stock” style voltage ranges. PN make a pair of 12v 130 class motors that could be very interesting.
Hope this helps…
Dont tell me you have seen this already, LOL :smiley2:
My mistake, Thanks TD
Sorry Ken,
Having 1 of my anal days with selective vision/hearing or something like that…Those items are way cheap in my opinion, Looks to be a cheap car to hopup or so 1 hopes…. :p:smiley2:
again sorry :smiley2:
Interesting,
I had never heard of these guys till now but i dont know if it will produce the hype of the Sony or take its market share in this country…
The site had a lack of info i feel, thats just me…
It looks and sounds the part :smiley2: but lets wait and see :huh:
Edited by – peteWah on 25 November 2005 08:38:22
should be fine. this Question has been asked before
And then what happened 😀
4×1.5=6, ;What…
Good luck…
OK avoid my Question then :dead::dead::dead::huh:
Hey Ken
How much have you paid for those hop up parts for the AWD
so I knows what to expect to pay…The closer it gets to release the more parts on this forum and others i seem to be seeing but with no prices as yet unless in Japanese, SO Im curious as to what the prices are for that list of parts you have stated above if its not to much trouble. :smiley2::huh:
Cheers.
It will all come soon enuff Z, somebody will find a way… When you coming back for a psp and z bash :smiley2:
What alloy diff setup, Try asking Aaron for particular parts as he is a wiz when it comes to finding them and knows alot about monsters period….
Ask ph2t who has done a 14 and 16tp hack or go look for the topics under the mini z technical forum… :smiley2:
Dig out part of your gearbox and wack a 15 tooth pinnion in it :D:smiley2:
It’s like that hay…
TD,
That works perfectly because i will then have money for you…Me of course, and i now have a racer to run…
Thanks for the servo gear TD…
:smiley2:Hello there,
You should have a look around this site a little closer,
There are 2 people on this site that make a turbo that is much better than a bloody gpmV2…And read all this topic
http://www.ausmicro.net/v3/topic.asp?TOPIC_ID=2044&FORUM_ID=13&CAT_ID=4&Topic_Title=my+%22Woah+Nelly%21%22+Turbo%2E%2E%2E%2E&Forum_Title=Mini%2DZ%2C+Mini%2DX%2C+X%2DMods+%2D+TechnicalHope this helps :smiley2:
Send a email to Aaron, He will get back to you on that much needed Answer to the Question in detail…
I was thinking a spider will handle either firelap fine
And the Alloy stuff for the 4.0 should be available in the ausmicro shop to the best of my knowledge… -
AuthorPosts
