SurfmyStrat
Forum Replies Created
-
AuthorPosts
-
hey, i dont know if this was discussed before, but shypo do you work at a hobby store?
you are currently at: http://www.ausmicro.com
yea thats what i was thinking, because i saw both the sprints and the dash cars before i found this site and was a little suspicous. Plus i saw the bodies and became even more suspicous. Thats why i posted this. Not only that but it was wierd how they never showed a picture of the things insides or the box.
you are currently at: http://www.ausmicro.com
umm, yea an original antenna and i added another antenna, about half the size from one of my clones, so i guess its not a double antenna but a one & a half antenna:D
you are currently at: http://www.ausmicro.com
would we send it to you? did you stumble upon a great idea? give us some more info on how this works…:D
you are currently at: http://www.ausmicro.com
no, not the solder between the 2 pads, the solder to the CB5 chip to the side of the pad closest to the edge, refer to the pictures you used for the instructions, scroll up ^
you are currently at: http://www.ausmicro.com
might i suggest saving your money a bit, im going to buy a nice hpi car. for about 250 usd. And im a kid with low income, about 10 bucks a week, and thats not stoping me from saving up, in the outcome, its worth it!!! better get a piggy bank… i got one:D:D:D
you are currently at: http://www.ausmicro.com
yea, ive been on this site for around 2 months now, about to reach 100! in 2 years, i might be up to shypo… or will i??? by the way, aaron is our dream of having a chat room on the site gonna come true???
you are currently at: http://www.ausmicro.com
yea, im SurfmyStrat… most of you have seen at least one of my posts, im the anoying guy on the site:D[;). Im from the United States, and on this site at least ones a day, but i dont always post. and this is my favorite smiley ->:D:D:D
you are currently at: http://www.ausmicro.com
i just did the mod!!! it didnt effect my car at all i dont know what to say, maybe i didnt do it right, but heres a question, the solder between the cap and the cb5 chip, are you supposed to get rid of it after you take out the cap??? sorry im not to good with electronic circuits and what not…:D
you are currently at: http://www.ausmicro.com
would i be getting ripped of though?
you are currently at: http://www.ausmicro.com
not a bad idea, but ive decided to drop the project, because as you micro_amps said there wont be enough energy from the panels, and i checked the cells arent cheap so… maybe someone else will give it a try in the future.:D
you are currently at: http://www.ausmicro.com
Edited by – SurfmyStrat on 10 May 2003 10:49:04
hey guys, havent been on in about 4 days. Im moving at the moment and you all know how that is. Well, i was thinking about getting a larger scale car. Here are some of my ignorent questions, but bare with me because i dont know much about large R/C’s. I was thinking a mini-z or something bigger.
How fast can a mini-z go stock? with hop-ups?
Are there good mods?
Any good ones for a price range of $150 or lower… are those RTR?
What scale is a Mini-z?
could i get a better car(about 1/10 scale) thats better quality, speed ect. thats RTR?if you guys could help me out, plz, that would be great… thx in advance!!!:D:D:D
you are currently at: http://www.ausmicro.com
hpi is a 1/18 scale car i think, cant remember. I say them at my local hobby store two days ago, retail for about $200. Nice cars. Definetly not Micro R/C’s:D
you are currently at: http://www.ausmicro.com
those are nice… is the yellow one a ford street rod???
you are currently at: http://www.ausmicro.com
what a cheesy site, if you go to where the tips & tricks are, the page is empty, same with the custom gallery. I bet they dont even know what the heat sink is let alone custom modification.
you are currently at: http://www.ausmicro.com
ill give it a try and see what happens, couldnt hurt.:smiley2:
you are currently at: http://www.ausmicro.com
also before i forget, you should add more smileys, here are some ideas:
mouth dropping smiley
drooling smiley
confused smiley:D:D:D
you are currently at: http://www.ausmicro.com
that zento supra…….uhgghhhh makes me want to drool, any idea how much$$$
you are currently at: http://www.ausmicro.com
im sure that everyone here would post stuff and use the chat room. What you could do is get a moderator in the chat room, it would be cool because you could do things such as schedule a talk and discuss things live. That would be awesome. (think of all the great ideas that could come of it!!!:p)
you are currently at: http://www.ausmicro.com
i dont know if this is possible for you guys or what, but it would be pretty cool(if you could) if there could be like a mini chat room on the website… so you could chat in real time… just something to think about:D
you are currently at: http://www.ausmicro.com
i guess i was a bit slow:shy:sorry:D:D:D
you are currently at: http://www.ausmicro.com
what exactly is a Mosfet?(sorry for my ignorence)
you are currently at: http://www.ausmicro.com
20-25??? thats a lot to pay for a clone. Here in the US ive gotten clones that were good for $2 USD, ive also gotten a lot of crap so…yea.
you are currently at: http://www.ausmicro.com
nice car, i like the paint job, and the rear axle is nice…:D
you are currently at: http://www.ausmicro.com
i would say its more 12-60, because i doubt that a parent of an 8 year old would let them solder things and modify little tiny things with little tiny parts. Also an 80 year old person wont even understand what the thing is, let alone be able to take apart the circuits. I wouldnt even think a 60 year old person would have one but you never know!!!:p
you are currently at: http://www.ausmicro.com
-
AuthorPosts