VR-4

[VR-4]

i got the intell peek pulse charger and i dont have any probs on it. i just set it on the lowest charge rate and let it charge. it might just be that type of charger.

[VR-4]

yup allready made 12 and sent them out and theres now a new verson the pro b2 and pro b2 rtr.

the pro has a custom adj. camber front cover
alu. motor pod made the for orion big block
can hold up to 8 cells “reciver pack size”
limited slip ball diff.
and alot more and all parts are anodized green

so far im not takeing any more orders for now, i gotta make 25 b2’s and 10 pro b2’s so im booked solid for about a month.

oh yeah note the kits now have 2 types of radio covers the 1 like in the pics now called the high type and a new low type that lowers the cover 7.5mm but the electronics need to be mounted onto of it like the pro z

[VR-4]

i did the same till i hooked a charge deck upto my rc car charger

[VR-4]

i did the same till i hooked a charge deck upto my rc car charger

[VR-4]

there easy

[VR-4]

so its faster thats all that matters

[VR-4]

i use tire warmers but i just keep my fule in a cooler.

paris pipes suck my left nut. there “turbo” pipe is ribber like a dildo but should that slow air flow down? i love my novarossi rex pipe and my cvec they kick azz.

i just hit 100.2 mph with my fusion but i scorched a piston running it so lean but with some time and changeing the set ups i can beat the worlds fastest tc3. only problem is im distroying the front of my bodys ater 90mph the front end of my body gets puched down from so much down force it starts scrapeing.

it will be about a week ta fix my eng insted of reparing it im just buying all turbo componets for it so i need some time ta round up the $350 for the parts. as for my wheel nuts i went from blue thred lock to red becouse i lost a rear foam on the first speed run “kinda funn becouse it looked it shot past the car and and wen outta sight and i never found it”

[VR-4]

i charge mine of my intell peek charger.

try useing a 4 cell pack and let it sit for about 45-60 sec

[VR-4]

i charge mine of my intell peek charger.

try useing a 4 cell pack and let it sit for about 45-60 sec

[VR-4]

did you do the controler mod?

[VR-4]

did you do the controler mod?

[VR-4]

thinking of managascar or however you spell it.

play risk it tought me geography and now i got a taste for takeing over the world and ruleing with a iron fist

[VR-4]

thinking of managascar or however you spell it.

play risk it tought me geography and now i got a taste for takeing over the world and ruleing with a iron fist

[VR-4]

i talked to a guy who used it and he said it left shit in his eng and it smelled like shit and grape he said it smells nastyer than normal nitro

[VR-4]

i wont put it in my rossi

[VR-4]

i wanna know if it burns clean or f it gums up your eng.

[VR-4]

thats whare your wrong i run ether a handwound nml or a plasma dash and with a 20 tooth and i still got power and abunch of extra speed.

[VR-4]

dought it works. i wouldent put anything in my fule but never herd of it.

i get the exhust smeels like crap still

[VR-4]

well my rc plane hit house fences trees so i would suck at that lol but its still flying firebird xl the best rc plane in the world

[VR-4]

i made some nice jumps in a field by my house by just gettin some woodchips and covering them with dirt. its a 6 foot high launch ramp 🙂 so far its killed a ofna, koysho impherno mp7.5, 3 t maxx’s my old gc10 gt.

so far no car has lived from a full speed jump but i got high hopes for my monster gt on the 4th tank of brakeing it in and then im goin for the gold. i really think it can make it my rc10 gt allmost did but when it came down on its nose the chassy got a extra 45 deg. kick up lmao but that wreck wasent anything compared to my fusion hittin a curb at 90+mph. just had ta take some pics of that wreck

[VR-4]

if you need help on how to solder them i know a site with some good tips and pics of how to so just pm me and let me know

[VR-4]

there like penny racers but bigger

[VR-4]

theres no proformance gain with it. i dont like top fule but use whatever your eng. was brokein in on.

im useing 15% blue thunder race in my .21 nova rossi trophy “3.5” in my fusion. just remember that if you let your fule set it can go bad. so stick with the quarts. i dump my fule when its a month old for fresh “2 days ago i dumped out about 2/3’s of a gallon” but bad fule can wreck your eng. ask any nitro guy.

what kind of eng. are you useing? i got a nice little nova rossi .12 that in a stock maxx it beat a 2.5 maxx and i might sell it for a few bucks, just put a m speed turbo rod piston sleve 6.0mm composit slide carb turbo crank shaft. but i got my fusion and sold my hpi so i have no need for it.

heres some low coust mods you can do for some power.

port and polish.
carb bore “unless its a 5.5mm”
light weight fly wheel
racing clutch
pipe
turbo 2 peace head and plug
racing headder
gears

[VR-4]

some4one dosent know anything about nitro cars.

dont use 20% use 10-15%

when you brake a eng. in with 1 type of fule dont switch to outher fules.

i like blue thunder, odonald, wild cat i personaly use blue thunder 15% with a med. turbo glow plug.

i forget who makes file pumps for rc but i think there abot $75 becouse i looked into 1 but never got bought it. and then you can run no muffler just a header with a a peace of tube to the hole in the maxx’s chassy ta keep it from getting dirty and then you wont run to rich or lean but still be loud.

just like cars mufflers = power loss if you take it off you will need to readjust the 2 speed for the extra power.

the traxxas mufflers are crap. when you get it rip the baffle out of the pipe “little alu peace” and you can see a power increase.

the best racing pipes are

cvec
novarossi rex
omega turbo
stinger

[VR-4]

ok yes the savage is better theres going to be way more 3rd party suport than the t max. as for the fule tank its same as a t maxx but on the savage you can put a bigger tank becouse theres more room

[Author]

Posts