Impreza

Forum Replies Created

Viewing 25 posts - 376 through 400 (of 1,062 total)
  • Author
    Posts
  • in reply to: which is the best generation? #26228
    Impreza
    Participant
    • Posts: 1124

    I would like to have the 350z booster set, I even had my grubby paws on one, but thought I would hold off till later:( ~6 months later and still no 57 mhz booster. So I will say the auto modellista set, 4 bodies and boost. The only -ve is the 27 mhz.

    VooDoo, I have had no problems with my sbcg’s either (40 B mhz). Just curious where did you pick it up? In Canada?

    in reply to: Pullback tyre modification #26262
    Impreza
    Participant
    • Posts: 1124

    lol ph2t speaking from experience me thinks. The wheels will stick out a bit due to the gear on the left side of the car. So don’t cut the @#$%^ hub of the right rear wheel too short.

    Personally I think the wheels stick out too much, but I guess it all depends on which body you put on top of it.

    One more thing carefull not to push the axel (metal) right thru the wheel (plastic) when you are putting the wheel back on.

    in reply to: Favorite New Super Bit Body #26261
    Impreza
    Participant
    • Posts: 1124

    body yes, chassis is as lo as it goes:approve:

    in reply to: Hitari Mean Speed Machines (zipzaps – NOT!) #26620
    Impreza
    Participant
    • Posts: 1124

    Me thinks me likes the Subaru;) Will have to check these out.

    Nice work on the vid:)

    Edited by – Impreza on 23 October 2003 08:47:55

    in reply to: Favorite New Super Bit Body #26616
    Impreza
    Participant
    • Posts: 1124

    chassis clearance on the sbcg’s is very low.

    in reply to: Changes to the Moderating Team! #26635
    Impreza
    Participant
    • Posts: 1124

    what? shirt POSTAS:smiley2:

    Edited by – Impreza on 23 October 2003 07:51:29

    in reply to: “Show us Yer Bits” Competition Discussion #26793
    Impreza
    Participant
    • Posts: 1124

    Nice work DarkTari, I just want to know if your golden rod is wired for sound? Now that would be cool:)

    in reply to: THE MINI Z MONSTER #39105
    Impreza
    Participant
    • Posts: 1124

    not coming up for me either. Everyone must be wanting a peak at the beast:)

    in reply to: my new cars arrived!!! #26942
    Impreza
    Participant
    • Posts: 1124

    Thx for clearing up what command hold was barto. I second everything that you listed, except sub a 27 mhz micro instead of the CCG. My 27 mhz auto modellista doesn’t seem to have stuttering problems.

    One more point to add, most everyone knows this already thou, the lowered chassis gives the car virtually zero ground clearance. No 4×4 in these babies:)

    in reply to: Favorite New Super Bit Body #26941
    Impreza
    Participant
    • Posts: 1124

    Ok. I am trying a 30 day limit with this poll, so make sure you vote by mid-November:)

    so far the enzo and 911 have it.

    in reply to: Changes to the Moderating Team! #27053
    Impreza
    Participant
    • Posts: 1124

    Congrats u. Shypo what gives?
    Hope you’ll still be in the forums.

    ps. dgs73 do you have pics (members area, or other) of your pitwork?

    in reply to: Bit Char-G $29.99 aus #27052
    Impreza
    Participant
    • Posts: 1124

    I don’t have a CCG, just a microsizer and quality wise I don’t think there are any major differences??? Both (I should say all 3) are Tomy. The PCB cover is glued on the CCG?? Is it easy to get off without breaking?

    in reply to: Bit Char-G $29.99 aus #39113
    Impreza
    Participant
    • Posts: 1124

    wow, will have to check out how much they are going for here:) That is almost down to the cost of a clone:)

    in reply to: BCG – design error ? #39116
    Impreza
    Participant
    • Posts: 1124

    I could be dead wrong as well?? anyone?:dead:

    in reply to: BCG – design error ? #39095
    Impreza
    Participant
    • Posts: 1124

    someone will have to break out the callipars and a ruler. matic, the torque generated by the motor is thought to effect the path the car takes. The cars (seen alot btw in clones ftmp) tend to travel in a large arc as a result of power being applied to the left rear of the car only. Since these cars have a small wheelbase the torque of the high rpm engines would have a factor on the path the car takes.

    Some one else will be able to give you a more scientific explanation I am sure. My physics is limited to early University:blush:

    in reply to: my new cars arrived!!! #27548
    Impreza
    Participant
    • Posts: 1124

    Looks good barto, how many do you have in your collection now:)

    You will like the Tureno when it comes. One of shypes favorites I believe:shock:

    in reply to: my new cars arrived!!! #27246
    Impreza
    Participant
    • Posts: 1124

    Looks good barto, how many do you have in your collection now:)

    You will like the Tureno when it comes. One of shypes favorites I believe:shock:

    in reply to: Congrats Dave and Barto #27875
    Impreza
    Participant
    • Posts: 1124

    Jamie, congrats on the big 2-0-0-0 🙂

    in reply to: Super Bit Char-G….Gimmick or God Send?? #27874
    Impreza
    Participant
    • Posts: 1124

    nice point titaniumonkey:) I have two 40 mhz sbcg’s ph2t and the range doesn’t seem to be a problem. What is the command stutter?? sry:blush:

    in reply to: BCG – design error ? #39525
    Impreza
    Participant
    • Posts: 1124

    That is a great point matic. I don’t know if cutting the axel would help, but I do like the shim idea since the axel has a screw-like lock on it you could position the opposite wheel correctly. I found this out when putting the pull-back wheels on a bit chassis. I think ph2t has looked at this problem as well???

    in reply to: Congrats Dave and Barto #28570
    Impreza
    Participant
    • Posts: 1124

    Dave, I take it you will see the movie when/if it comes out next spring:)

    in reply to: Favorite New Super Bit Body #39141
    Impreza
    Participant
    • Posts: 1124

    TallduDe, not all the bodies sit that high. I don’t have all of them, but have seen most. I really like how the Ferrari 512BB and especially the Testarossa sit on the new chassis. The Jota sits nice too, imo.

    in reply to: Congrats Dave and Barto #39142
    Impreza
    Participant
    • Posts: 1124

    lol, Jamie, it is kind of a cult classic. I watched it back in University, my cousin got me onto it. Here is a link if you want to check out their website. Not even sure when it was origionally aired etc.. Dave?

    http://www.reddwarf.co.uk

    Edited by – Impreza on 16 October 2003 15:19:37

    in reply to: Member Gallery Comments #38980
    Impreza
    Participant
    • Posts: 1124

    Thanks barto the refresh worked. Added a little text. Will have to update a few things once I finish some projects:)

    in reply to: Super Bit Char-G….Gimmick or God Send?? #30020
    Impreza
    Participant
    • Posts: 1124

    he he. Jamie, sorry I didn’t give my two cents worth. Visually, I really like the Superchar-g. I like that they are expanding the car selections into a more international market ie Europe, for now. I also like the wheel proportions as well, although I have a tonne of tyres that I can’t use now from the origional tyre sets. As for the negative, I guess that will come as I tinker more with them. Don’t really like the run-on out of range though:(

Viewing 25 posts - 376 through 400 (of 1,062 total)