perriscope

Forum Replies Created

Viewing 23 posts - 51 through 73 (of 73 total)
  • Author
    Posts
  • in reply to: www.batterieswholesale.com #27567
    perriscope
    Participant
    • Posts: 80

    are they rechargable??

    in reply to: FUEL CELL in a Micro… RS4 HPI #27263
    perriscope
    Participant
    • Posts: 80

    Just read this article and it reminded me of this thread and we all kept going on about how good fuel cells aka a Hydrogen based economy would be. . . well seems to have a major down side to it that they will need to investage/ fix ..

    here is the article from fuelcelltoday.com

    http://www.fuelcelltoday.com/FuelCellToday/IndustryInformation/IndustryInformationExternal/NewsDisplayArticle/0,1602,3020,00.html

    man thats a loooooooooong link hope it works
    :p

    in reply to: FUEL CELL in a Micro… RS4 HPI #27565
    perriscope
    Participant
    • Posts: 80

    Just read this article and it reminded me of this thread and we all kept going on about how good fuel cells aka a Hydrogen based economy would be. . . well seems to have a major down side to it that they will need to investage/ fix ..

    here is the article from fuelcelltoday.com

    http://www.fuelcelltoday.com/FuelCellToday/IndustryInformation/IndustryInformationExternal/NewsDisplayArticle/0,1602,3020,00.html

    man thats a loooooooooong link hope it works
    :p

    in reply to: www.batterieswholesale.com #27256
    perriscope
    Participant
    • Posts: 80

    hmmm,

    they have a great range off batteries except when you want a 9V battery. Anyone know of a place to pick up cheap 9v batteries?

    in reply to: www.batterieswholesale.com #27558
    perriscope
    Participant
    • Posts: 80

    hmmm,

    they have a great range off batteries except when you want a 9V battery. Anyone know of a place to pick up cheap 9v batteries?

    in reply to: Boat Char-G #27557
    perriscope
    Participant
    • Posts: 80

    dudes I already own two of them they are pretty good i wrote a little about them. In the water, sea, air section of this forum, check it out, sorry still don’t have digital camera. but in a couple of weeks I will ;o)

    in reply to: Boat Char-G #27255
    perriscope
    Participant
    • Posts: 80

    dudes I already own two of them they are pretty good i wrote a little about them. In the water, sea, air section of this forum, check it out, sorry still don’t have digital camera. but in a couple of weeks I will ;o)

    in reply to: 2 Fast 2 Furious #27796
    perriscope
    Participant
    • Posts: 80

    I’m starting to sound like the ebay correspondent but anyhows . . . . they have made fast and furious zip zaps ;o)

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3134418088&category=44024

    and . . . .

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3135001834&category=2565

    didn’t takem long

    in reply to: They just wont stop!! #39521
    perriscope
    Participant
    • Posts: 80
    in reply to: Perfection motors #28246
    perriscope
    Participant
    • Posts: 80

    strange you feel that way freeloader, I reckon it’s great that these little cars are being upgraded all the time!! and as for the price!! OMG these cars and the performance parts are soooooooooo cheap compared to any other RC sports!! especially when you find cheap suppliers and toyeast.com are pretty good on price. I certainly like the idea of own 6 cars all on different frequencies for the average price of one other rc car on a different scale

    in reply to: Ebay $2US for high speed???? #39523
    perriscope
    Participant
    • Posts: 80

    thats the whole idea!! when the download is on the server I’ll throw a link to it via tinyrc.com if that is ok by the moderators on this website ;o)

    in reply to: Ebay $2US for high speed???? #28279
    perriscope
    Participant
    • Posts: 80

    Hey guys,

    I just got emailed the BIG SECRET!!!!!

    It came in a PDF format so I have emailed to Aaron and it will be in the downloading section soon for all to see ;o)

    And yes it is a dodge mod, you are suppose to cut up a match stick and stick it in between your heat sink and motor. I guess it assumes that your gears and motors arn’t aligned and is suppose to realign you motor. But it already is good then it doesn’t do anything or hinders it’s rotation. And as both of the people who emailed to me said it stuffed their motors. So kidd’s don’t try this one at home!!!

    and yeap you surely couldn’t of guessed that mod!!

    in reply to: Quad Mod #28276
    perriscope
    Participant
    • Posts: 80

    i actually haven’t touched it since we last spoke, busy busy busy with work and going away hee hee friend has holiday house down coast, scuba diving yay and I’m going again this looooooooooong weekend. So not much is getting done in the way of mods, but I will eventually get it done!! and show the world!!!

    in reply to: FET modded BCG clocked 20.8 Km/h !!! #28388
    perriscope
    Participant
    • Posts: 80

    OMG!!!

    can it turn?? or does it just flip?? it must wheel stand like nothin else!!

    in reply to: Mini RC boats #45959
    perriscope
    Participant
    • Posts: 80

    ohhh yeah

    the size is 1/64 scale so they measure 13cm long and 4cm wide, pretty small awesome if ya gotta pool, just have to make them faster!!

    in reply to: Mini RC boats #45958
    perriscope
    Participant
    • Posts: 80

    It would be easier if i had a digi cam but I don’t.

    The controler is way smaller than bit char-g controller. the button controls are like driving a mini rc tank. left prop forward and reverse. right prop forward and reverse.

    thus you can make extremely tight turns, their doesn’t seem to be any calibration for steering either on the boats, and i noticed on my one it over a long distance it does turn a little left :O(.

    in reply to: Ebay $2US for high speed???? #28455
    perriscope
    Participant
    • Posts: 80

    Ok,

    i have email 4 people who have bought it, hopefully they don’t ignore my emails, come back to this thread to find out all ;o). the question will be answered eventually. but reading over his description it sound sooooooooo much like he is going to say, put grease or maybe WD40 on your motor/gear assembly, especially when he says it will make it run with less noise

    in reply to: Ebay $2US for high speed???? #28453
    perriscope
    Participant
    • Posts: 80

    yeah prob b.s but it would be kinda funny to post his b.s on this forum, then everyone can laugh at him ;o)

    in reply to: Ebay $2US for high speed???? #28452
    perriscope
    Participant
    • Posts: 80

    Micro that is a top idea!! I will do that,

    as for sueing me he can’t unless he has a patent on it which is a soooooo not going to be true!!.

    in reply to: Ebay $2US for high speed???? #28448
    perriscope
    Participant
    • Posts: 80

    I know its dodgy, but I’m sooooooooo curious, I’m thinkin maybe i’ll buy it, just to see what it is, but I don’t want to fund such a person?? how many of you want me to do it??? I’ll do it if enough people say yeah!! that way heaps of people on this forum will then know how dodge he is and spread the word. . . . . or if is actually decent then I will tell all on this forum and we can all do it for free!! but it’s probably something we allready knew, so I don’t know???

    in reply to: FUEL CELL in a Micro… RS4 HPI #29068
    perriscope
    Participant
    • Posts: 80

    did you make a smoke bomb?

    alfoil ping pong ball??

    in reply to: steering return springs #29905
    perriscope
    Participant
    • Posts: 80

    thanks for the help guys ;o)

    sorry cranga I thought I would be after somekinda wire, didn’t realise you could unwind a spring and it would still be springy ;o) thanks heaps

    in reply to: steering return springs #45899
    perriscope
    Participant
    • Posts: 80

    thanks for the help guys ;o)

    sorry cranga I thought I would be after somekinda wire, didn’t realise you could unwind a spring and it would still be springy ;o) thanks heaps

Viewing 23 posts - 51 through 73 (of 73 total)