SausaGe_LinK
Forum Replies Created
-
AuthorPosts
-
Nice vid, i take it you were the MR02.
Can i see some pics of how you mounted the camera to it ?
Also doesnt your camera break when you smash like you did in the end ?Charlie have you ever actaully pulled the diff apart?
If it is anything like the mini Z stock diff then i can tell you that there is no discs, but 3 spider gears and some other shit which i cant remember.The thing is i thing i am getting problems from it. But we will see once a nelly is installed and the car is going again finally. 🙂
Looks good mate.
What do you mean by slippage?
Like the pinion gear slipping on the spur gear, or the actaully diff internals slipping. If the internals are slipping then maybe they are stripped?Yeah i was thinking that too. so i want to add some plastic to it now 😛 just to be safe. I’ve heard its a RF filter of some sort :question:
Yeah, there is a really extensive good post on this.
Quote:lol all you need now is to plasma dashes in therEven xspeeds, but plasma dashes would rock 😀
Thats damn cool!
Yeah the x speed isnt that great, its good though considering you dont havnt to add fets etc to run it.
I think ill leave it where it was…
Mines in pretty bad shape atm, alot of plastic has been taken from it lol 😀Quote:Before Whoa Nelly, I was an unattractive micro rc nerd, girls wouldn’t talk to me (other than in court for ANOTHER restraining order), I couldn’t ride a bike, and life was getting me down…But look at me now, now I have a LXX-z that pulls over 30 kays an hour, all that other stuff still happens, but now I don’t care…
Thank you Nelly, and thank you ph2t
haha thats the funniest thing i have read all day! 😀
haha how funny is the music in that video 😀
I dont think you could make a plug in and play setup with nelly, as you are using the control logic that would normally control the old fets but now controls the new ones.
Quote:It becomes quite hard when the copper pads lift…..the first time that happened i though i needed a new pcb, but i removed the “black box” and traced the tracks back and double checked th with a DMM, then added a wire link to the FET stack.How the hell do you remove the black box!
Im not much of a fan of stanley knifes 😀 Ive had to many close calls with them :shy:
What about GP750 ?
Are they japenese or chinese cells ?Quote:Quote:Actaully the easiet way to remove the stock fets is to add a shitload of solder to the pins and just keep heating each side continuously. Then you will be able to push the stock fets of the board with the soldering iron. Then clean it up with desolder braid.
Watch this guide.
http://www.insflug.org/shots/fetremove.asf
That shows best how to remove FETS.Actually thats a BAD idea, too much heat can destroy the adhesive between the fibreglass PCB and the tracks.
The EASIEST METHOD i have found is to cut all 8 legs off the ic’s (who wants 3004’s anyway???)
and clean and tin each pad…..if any of the pads lift when you do this you are retarded.I guess everyone has there own way :smiley2:
Thats awesome, the audio in it sounds so good.
I wish i had 165 dollars 🙁I want a MF now :approve::approve:
That looks pretty damn cool.
It doesnt really show how fast it would go without the mod motor…Quote:Quote:how the hell do u replace a mosfet. its crappy cause i live in byron bay on the coast and not many people here have z’s. the fella at my hobby shop is pretty smart he might be able to fix it. yayYou have to desolder them from the board…Using a soldering iron, heat the legs…you might wanna pick up a desoldering braid from the store…Place it carefully on the mosfet leg/s, heat it with the iron (making sure the iron doesn’t touch the chassis….lol), and the braid will absorb the solder off the legs, but do it carefully or you could melt the copper pads on which the legs are soldered to.
And those people in your area who don’t have Z’s (including Iwavers) don’t know what their missing…lol
Actaully the easiet way to remove the stock fets is to add a shitload of solder to the pins and just keep heating each side continuously. Then you will be able to push the stock fets of the board with the soldering iron. Then clean it up with desolder braid.
Watch this guide.
http://www.insflug.org/shots/fetremove.asf
That shows best how to remove FETS.Changing FETS wouldnt fix your problem, it may make it worse as they might allow the motor to draw more current.
I put a 6v 3300uF capacitor on my little bro’s Z, it fits nicely, its not that big either because its only 6v.
If it is the switch, maybe wire it to turn on a low resistance relay or something like that ?How do i take the stupid black box off, i cant install them with it there…
But if he is replacing the magnets then he doesnt have to worry about screwing them up
Ph2t you have a pm
No pics work for me…
If you are putting in new magnets dont you get the can with the magnets ??
If you dont then why dont you try heating it up over a stove ? -
AuthorPosts
