TallduDe
Forum Replies Created
-
AuthorPosts
-
how do u make these nerf planes fly? do they take off or do you have to throw them into the air?
ive tried the pullback mod for the rear wheels and ribbed normal wheels at the front it works fine with high speed motors.
just allow for a really big turning circle. 😀
i want to take my cars to a basketball court i hardly get to use them at really high speeds!
ohhhhhhhh sweeeet man! i cant wait. ive always wanted a micro plane but dont have the skills to make one.
yeah man ive been waiting for 2 bodies to arrive?
wats the story man??
VAT is value added tax
like GST goods and services tax in Oz
or sales tax in america
Do all the bikes go the same speed or does one go faster then the other?
i remember reading an article about this car years back when he showed it off at a motor show in europe.
they asked does the car drive?
and he goes yes it should but i have to find a monkey that could drive it!
the guy is nuts but you got to admit its one hell nice model, esp the motor sounds great!
cool man thanks
i think ive seen that on ebay aswell.
thanks for the pic (again) 😀
hey trash are you going to post any pics of the plane you got on your travels?
i dont mean to bug ya…….much :p
Quote:I’ve orderred one of the subs from ToyEast. $13US, plus postage, so I threw in some Minis and new BCG motors too (4.2s). Should be here in about a week. Now I won’t need the picture of the shark on a stick to terrorise the goldfish at work.hahahahahahahahahaha
cool!
tell us your opion of the thing, coz im still debating whether to buy 1 still. 😀
cool body!!
any word about the chev bodies? like is the shipment going to be made?
after owning a few clones which promised to be better then then Bit’s i have to admit that i still prefer the original items.
all of the original cars that i have owned go straight, right out of the box.
whilst all the clones seem not to.
the big problem with original cars is that they have slow motors but all that is needed is a motor change. some clones have a hard wired motor so unless you do some soldering your stuck with that motor.
bit’s are designed so they are easy to up graude that is why there is a whole variaty of parts for then like motors, gears, tires and etc.
if your going to buy a cheap clone remember you get what you pay for.
when you said clear ’57 Chev bodies, did you mean the same size as a zip zap or the size of a Bit????
i wouldnt mind a 57 body.
sweeet
i might have to get one just for ummm errr yeah
ok im gettin one coz it looks cool hahahaha
hey everyone
toyeast has got subs!
http://www.toyeast.com/proddetail2.asp?pdtid=ANYW002
i dont know if they are as good as the original ones in the bay link which trash showed but they are a hell of a lot cheaper so who cares right?
i might get one to scare my fish hahahahahahaha
has any Industries people out there fet moded one of these things yet????
would like to know how the boost function operates with this thing.
cool!!!!!
can you give any more details about this plane man, like whats the range etc etc etc
i kinda want one:D
well i got the monte carlo special mini
but….
i also bought the union jack roof design so im not going to put on the decals that came with the car. as my sister said leave like the austin powers car.
well i just got my mini in today!!!
first off the packaging is very good, it comes in a tin with lots of foam padding inside.
the body is very detailed and the roof can be removed so you can put other types of roof design on it. the body has a lot of cromed plastic on it for the bumper bars and grill.
the controller has a boost button on it and a switch which allows it to be on boost at all times. the controller chrages the car for at least 3minutes and the car has a run time of 10-15 minutes depending on how long you have it on boost for.
the boost feature in my opion is better then a tomy BCG booster, the boost only works when you press the forward and boost button.
meaning that when you press the left, right or revrse buttons the car is off boost. it makes the car very controllerable and a a result it dont flip on it side even with a high rev’s motor in it.also the car has some lights which only work when you press the forward or reverse buttons. after taking the body off to see the inside i saw that the lights are not like the perfection light sets at all. its more of a circut layout with two very small lights on a pcb on each side.
the car drives very well and it is easy to control and has a range of at least 10metres inside my house.
the bad points are….
the body is too short to fit on a BCG and needs work for it to fit on.
the tires are very hard compound as a reult it does not turn as sharply as a BCG.
the rear wheels are the same size as the BCG front wheels and the front of the minis wheels are even smaller!! so you cant change the front tires with any other tire compounds only the rear ones.
the rear axels do not fit on a BCG or vice versa.the good points
the lights are a great idea.
the boost function makes this a very easy car to drive.
it charges for a long tme providing a very long run time.
the body detail is great and the wheels they use make it look more to scale then any other micro.i like this car alot and its worth it to buy one in my opion, even if you dont like it after you buy one you can always use it for spare parts as it comes with a 200mah battery and the lights are very cool.
hey micro_amps or jamiekulhanek could you guys provide a tut to how to make one of those charges, i really need more run time for my bits and cbf to mulit charge no more.
Davef’s dream of a muilt charger system would be great, i really need one of those.
any ideas on how to make one????
hey micro_amps or jamiekulhanek could you guys provide a tut to how to make one of those charges, i really need more run time for my bits and cbf to mulit charge no more.
Davef’s dream of a muilt charger system would be great, i really need one of those.
any ideas on how to make one????
cool
no problems ill give my 2cents worth on the this topic :smiley2:
well my order came to a total of 35 dollars yankie
i orderedsome other stuff aswell. shipping cost me a further 20 dollars so all up cost me 85 dollars australian.toyeast cost a heap for shipping but it is one of the fastest ones around and the shipments come double boxed so i guess you pay for it.
but still they really hit you hard in shipping.
is that a seperate charging station for those tanks?
you reckon it would be good for a bit char g? like contvert the platform so it can hold bits????
its because the mini doesnt come standard with the union jack roof, you have to buy a roof for it. its because all the roofs are removable. appearently they are releasing roofs with other nations flags soon…. when that happens you can get an australian flag for it.
heres a link to toyeast for the union jack and other types of roofs.
http://www.toyeast.com/subcatlist2.asp?catid=1087
Edited by – TallduDe on 27 August 2003 18:44:20
nice very nice.
what tools do you use to create those bodies man?
looks real professional :smiley16:
-
AuthorPosts
