Aaron

Forum Replies Created

Viewing 25 posts - 776 through 800 (of 1,875 total)
1 2 3 … 31 32 33 … 73 74 75
  • Author
    Posts
  • December 3, 2004 at 11:42 pm in reply to: Bearing Sizes: 1/18th Racers #57328
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Thanks. Been looking at a new list of Mini-T goodies from a supplier of ours, we’ll probably stock a few bits and pieces.

    A.

    --
    Site Owner Guy.

    December 3, 2004 at 8:19 pm in reply to: ToyEast Group Buy! #24171
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    No worries – those changes are in place.

    A.

    --
    Site Owner Guy.

    December 2, 2004 at 8:41 pm in reply to: ToyEast Group Buy! #24199
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    *nods* Will get those changes up shortly folks.

    The FINAL list I’m going to use is at the bottom of the first post (on the first page).

    So make sure you’re happy with that list!

    A.

    --
    Site Owner Guy.

    December 2, 2004 at 3:29 pm in reply to: a few pics of the Mad Max #24008
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    The dirty DGS has was one of the last of the orginal limited edition run made by Aoshima. It’s stunning 🙂

    For a laugh check out http://www.madmaxcars.com – interesting to see how rusty aussie sh!tters are worth more money in the USA 🙂

    A.

    --
    Site Owner Guy.

    December 2, 2004 at 3:02 pm in reply to: Iwaver 04 is OUT!!! It’s Madforce but better. #24285
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    I’m bringing in an 04 with the group buy. Will be able to do side by side comparo with my MZ from Bithed (when it arrives ;))

    A.

    --
    Site Owner Guy.

    December 2, 2004 at 3:00 pm in reply to: iWaver01 Mini RC cars now available in Australia #24286
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Some of those prices are just stupid though – and at AUD69.00 they’re either getting a massive break on them or they’re not paying tax etc 😉

    It’s not too late to get on the group buy and pay a little less 😉

    A.

    --
    Site Owner Guy.

    December 2, 2004 at 2:39 pm in reply to: ToyEast Group Buy! #24287
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    OK Everyone finalise your wish lists 🙂

    I’d like to start closing off the order so we can focus on making sure it’s all what people want etc 😉

    So am I the only one picking up an 04?

    A.

    --
    Site Owner Guy.

    November 29, 2004 at 9:52 pm in reply to: where can i get SI4562DY fets #24366
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Preist, I have a ‘odd’ 6 left over from testing so we can definately talk turkey about that. Posts is SFA (ie includined in the price). I’de prefer direct deposit, but PayPal can be done.

    A.

    --
    Site Owner Guy.

    November 29, 2004 at 9:00 pm in reply to: where can i get SI4562DY fets #24354
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Preist,
    If you have a look at some specs for the SI4562DY you’ll find that yup it’s a little better than the IRF7389….

    BUT it’s not really any better than the IRF7317 that will be coming on the mass market real soon.

    IRF7317:
    Total resistance at voltages for stock PCB 0.065ohms

    SI4562DY:
    Total resistance at voltages for stock PCB
    0.060 to 0.065ohms Datasheet isn’t consistent)

    They also handle basically the same current load.

    ausmicro.com will be selling IRF7317s for AUD20.00 (per ten) and have some in stock now.

    A.

    --
    Site Owner Guy.

    November 29, 2004 at 4:15 pm in reply to: ToyEast Group Buy! #24431
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Takata, I’ll annouce final calls for order the middle of this week (Wednesday) and you can deposit directly into our bank account (using cash or direct transfer).

    Kitsune and z-beam I’ll count the items from ausmicro.com seperately as they’re running from local stock.

    With the dollar staying high I may revise prices DOWN after the order is placed and the currency transfer gone through to refund the difference. ie I’ve done all these calculations at a fixed rate so that everyone is getting the same deal. I may use any extra to support shipping by Express instead of regular as an example.

    A.

    --
    Site Owner Guy.

    November 27, 2004 at 12:44 am in reply to: …RC18T REVIEW… #57225
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    I won’t be buying more toys for quite a while… The budget just doesn’t exist anymore – in fact there will probably be a major reduction in toys 🙁

    A.

    --
    Site Owner Guy.

    November 27, 2004 at 12:38 am in reply to: Iwaver MR-02 is OUT NOW FOR SALE U FREAKIN LEGEND! #57224
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    5A is nothing.. IRF7317 is good for 6A and the mightly old IRF7389 good for 7.3A…

    chuck a couple in a stack and well….. *ponders* 7317s will be out in volume soon…

    A.

    --
    Site Owner Guy.

    November 26, 2004 at 1:56 pm in reply to: …RC18T REVIEW… #57189
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    It sure looks the goods….

    Bit more rougher and ready lookign compared to the Mini-T….

    A.

    --
    Site Owner Guy.

    November 26, 2004 at 1:53 pm in reply to: Iwaver MR-02 is OUT NOW FOR SALE U FREAKIN LEGEND! #57188
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    $110 hey? Interesting… I suspect that’s a little above what iWaver actually expected them to sell for (their RRP was USD49.95) but we do have some of the highest import costs here…

    A.

    --
    Site Owner Guy.

    November 26, 2004 at 1:43 pm in reply to: ToyEast Group Buy! #24503
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    OK – I’ve just done a massive update ….

    Please check and get back to me…

    A.

    --
    Site Owner Guy.

    November 25, 2004 at 6:00 pm in reply to: New Forum: 1/18th Scale #24536
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Yeah 1/18th for many years has been the traditional “micro”.

    I suspect it won’t be long and I’ll be 1/18th enhanced as well…

    A.

    --
    Site Owner Guy.

    November 23, 2004 at 5:06 pm in reply to: 1420 calorie BURGER!! (ya, EACH!) #24743
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Ditch the mayo and serve it right here thanks !

    A.

    --
    Site Owner Guy.

    November 22, 2004 at 5:14 pm in reply to: best spot to score an Xmod?? #57147
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    *nods* betty.k, but you’re special 😉

    A.

    --
    Site Owner Guy.

    November 19, 2004 at 5:10 pm in reply to: best spot to score an Xmod?? #57104
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    chino – I tend to agree that AWD spoils 😉 *laughs* it’s very easy to enjoy and AWD car, and more challenging to punt a RWD or FWD car.

    I also agree that they’re just as bad as each other for breakages and weakpoints… but it just seems xmods suffer more wear/sloppy parts failure than breakage….

    A.

    --
    Site Owner Guy.

    November 19, 2004 at 1:52 pm in reply to: ToyEast Group Buy! #24854
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    I’ll be posting updates this morning – just back from two days training in Sydney and catching up on e-mail etc…

    A.

    --
    Site Owner Guy.

    November 16, 2004 at 8:45 pm in reply to: camaro mini-z project. COMPLETED. #57044
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    MX5 is currently wearing two coats of Tamiya Lavendar Purple which will then be clear pearled over…

    A.

    --
    Site Owner Guy.

    November 16, 2004 at 5:18 pm in reply to: ToyEast Group Buy! #24178
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Actually I was gonna give Username a cost for shipping AU>US it’s probably still cheaper than buying direct 😉

    A.

    --
    Site Owner Guy.

    November 16, 2004 at 4:03 pm in reply to: ToyEast Group Buy! #25035
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Cutoff date – Probably in about a week time for get included, then about a week to get the cash into the ausmicro.com bank…

    Kevsta ain’t you down for two of those tyres already?

    A.

    Edited by – Aaron on 16 November 2004 11:04:58

    --
    Site Owner Guy.

    November 15, 2004 at 9:12 pm in reply to: ToyEast Group Buy! #25062
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    Updated 🙂

    --
    Site Owner Guy.

    November 15, 2004 at 7:57 pm in reply to: …CAPTION TWO… #25061
    Avatar photoAaron
    Keymaster
    • Posts: 2146

    I think I need more collagen in my top lip…..

    --
    Site Owner Guy.

  • Author
    Posts
Viewing 25 posts - 776 through 800 (of 1,875 total)
1 2 3 … 31 32 33 … 73 74 75