Admin

Forum Replies Created

Viewing 25 posts - 2,026 through 2,050 (of 4,827 total)
  • Author
    Posts
  • in reply to: Bit Options (racing video) #16520
    Admin
    Participant
    • Posts: 5952

    im having problems downloading it help me please

    in reply to: Bit Options (racing video) #16519
    Admin
    Participant
    • Posts: 5952

    try it again, it should work.

    in reply to: Bit Options (racing video) #16518
    Admin
    Participant
    • Posts: 5952

    it doesnt work

    in reply to: Spot the ODD car out…! #16517
    Admin
    Participant
    • Posts: 5952

    hello,,,,,,, what the hell is that?:smiley15:

    in reply to: The Bit Char-G FAQ Thread #16516
    Admin
    Participant
    • Posts: 5952

    a cipple car is a metal part of the membrain of the racer. go tohttp://www.tinyrc.comto check out forums, then press bitchargeg then at the bottem type cipple cap

    in reply to: Tomy Bit Char-G vs. Bullet Bit Char-G #16515
    Admin
    Participant
    • Posts: 5952

    yea i have both of them, my accord bullet and my nissan skyline gtr, bullets a slow and non-customizable, while the real ones are the ones u need.

    in reply to: light mod kicks ass! #16514
    Admin
    Participant
    • Posts: 5952

    lolz i agree, i have a led mod in ma ride, and it works great.:smiley1:

    in reply to: Stirring problem! #16513
    Admin
    Participant
    • Posts: 5952

    hey i wuz wanted to know how can people just get spoilers from other cars to put on their bit charge g car if it has to be clipped in place?:smiley3:

    in reply to: Hmm Can You Replace The Crystal? #16512
    Admin
    Participant
    • Posts: 5952

    i changed my crystal outta my remtote and put it in my futabo 3pj so i got a kick ass remote

    in reply to: Stirring problem! #16511
    Admin
    Participant
    • Posts: 5952

    use a blender. it is alot easier than stirring.

    i second panda’s guess. sometimes the wire breaks at the board. or many times when people open up the car and close it bad. b

    in reply to: Hmm Can You Replace The Crystal? #16510
    Admin
    Participant
    • Posts: 5952

    crystal in the standard older controllers and OEM’s? yes, you can change the crystals in the controllers only. i used a OEM crystal in my bit contoller and it worked fine aside from the usual flip flopping of control actions. good for 5 car races when you switch a OEM board into a BCG car. b

    in reply to: BOOSTER HELP #16508
    Admin
    Participant
    • Posts: 5952

    just tryin ta get some tec. info on a booster and thought i would kill 2 birds with 1 stone

    in reply to: Your thoughts on the ausmicro.com change #16499
    Admin
    Participant
    • Posts: 5952

    Guys dont get me wrong the site is ok and all, but i think there was a bit too much hype over something big which isnt that big. Plus i checked out the trading direct website, it looks very amateur and i dont know how people will feel about buying products off them.

    in reply to: Your thoughts on the ausmicro.com change #16498
    Admin
    Participant
    • Posts: 5952
    Quote:
    Originally posted by DeBaSeR on 01?November?2002 …since Bit Char-G’s are hard to come by commercially here in Australia, unless you WANT to be horribly over-priced for Mario, Yoshi or any other Bits for that matter…

    As a new afficianado of Micro R/C cars, I’ve been trying to find the lil’ machines with very little success… but I ended-up buying my first Compact Char-G at Myer, Knox City (of all places) here in Melbourne for ~A$45 just last week… and I’m mighty impressed by it.

    As someone who comes from an (ancient!) history of scratch-built slot cars in the ’60s (when I was building ’em at the age of ~9 years), I’m keen to see how the Bit Char-G community is organized, especially here in Australia… but I think I’d do better putting this chatter in another one of the forums 🙂

    Just wanted to pass-on the info on Myers…

    John

    in reply to: Your thoughts on the ausmicro.com change #16496
    Admin
    Participant
    • Posts: 5952

    heheh – drop me a hint Aaron…

    hypothetically, if I was to want to purchase the Speed Racer, Yoshi, 4 frequency controller and 4 different frequency booster chassis (for starters)… would I better off waiting? 😀

    I would rather buy in Australia, especially off someone who supports you guys (and us) 🙂

    in reply to: Your thoughts on the ausmicro.com change #16495
    Admin
    Participant
    • Posts: 5952

    We are currently waiting while the developing other forum works on the next major version (it’s in beta now). I belive it will address some of the performance and user interface issues raised by Setanta. I’ll be testing the new code once it’s gone gold then migrating not long after that. That shoudl be an almost seamless change for everyone.

    As for Trading Directs range – well it’s going to be pretty damn good.

    in reply to: Spot the ODD car out…! #16494
    Admin
    Participant
    • Posts: 5952

    You Bloody Ripper:smiley4:, I have a skyline racer exactly the same as that but I used the front mounting that you get in the shell packet. Too bad I can’t win anything with a money prize so I can pay for this freakin’ hobbie. Thanx for the kudos:smiley2:

    in reply to: Hmm having some trouble with axels… #16488
    Admin
    Participant
    • Posts: 5952

    does a fullsize wheelset do any difference?

    in reply to: Your thoughts on the ausmicro.com change #16487
    Admin
    Participant
    • Posts: 5952

    now that u have said stuff about The new Trading, ima have to wait another 7 days for my Fairlday Z:smiley6:

    in reply to: Your thoughts on the ausmicro.com change #16484
    Admin
    Participant
    • Posts: 5952

    I think it’s great, a good move guys, especially as it keeps micros alive in Australia 🙂 (BTW – any chance the new forums could have emoticons that we can access by text, not the popup select system – I run a popup/java killer and it gets annoying – just thought I’d throw that in 😉 ).

    I must admit that I’m wondering what will be up for sale and wouldn’t mind some inside info as I was about to order some bits overseas but thought I’d wait. I know the launch is two weeks away, but by then I could have them in hand – yeah, I’m an impatient git I know 😀

    Maybe Trading direct could release info – I’d be prepared to wait if I knew what they were releasing – support for the forums, people that support us etc, etc, but the wallet is itchy and I don’t want to find out what I’m after wont be sold.

    Good work A & D 🙂

    in reply to: DIY evil track dividers (+pix) #16472
    Admin
    Participant
    • Posts: 5952

    LOL!!!! IS that a pellet on a corner of a track?? a yellow dot? or is it just me acting strange:smiley4:

    in reply to: Compact Char-G 27MHz range #16469
    Admin
    Participant
    • Posts: 5952

    ah, that’s not a bad idea.

    I’ve actually got willing housemates to give it a go with me here, but working and beering has been getting in the way :smiley4:

    have you done any other mods to try to improve the range? I wonder how much a telescopic antenna helps…

    in reply to: Bit Options (racing video) #16466
    Admin
    Participant
    • Posts: 5952

    hahaha…so who is that chick?

    in reply to: Compact Char-G 27MHz range #16464
    Admin
    Participant
    • Posts: 5952

    I’ve got one of the white GT-R compact char-g’s.

    I’ve gone through a few mods fixing the range, and have definitely seen improvement.

    I’ve:

    – removed tiny cripple cap from car

    – replaced car antenna with longer cat5 one

    – pot mod on car (half done at the moment, need someone to help out to do it properly)

    I’m fairly sure that at least the second two things above have helped, not too sure about the cripple cap.

    still plan on:

    – fine tuning the pot mod

    – doing a telescopic antenna mod

    pretty sure I’ll be happy with mine when those are done.

    in reply to: Your thoughts on the ausmicro.com change #16460
    Admin
    Participant
    • Posts: 5952

    Yes – Bit Char-G is going to be sold alongside Mini-Z by Trading Direct.

    As some of you have said – “it’s not a big deal”. Well it is to both Derek and I! We’ve sunk an aweful amount of time into running this place – the selling of cars and parts was not profitable for us, and to be honest the time spent making that happen meant the content of the site suffered.

    So at the moment (between real work commitments) I’m going through all our existing Content and finally fixing up all the “To be done” things. Then we have new content coming on stream soo including more textual based stuff.

    The other thing I should point out is that Derek and I wouldn’t have gotten behind Trading Direct if the prices and service were not going to be good. At the end of the day we have to recognise that if Derek and I were going to to make a real go of selling we would have had to have increased prices substantially to cover increased costs and we’re still no experts at retail!

    I will leave you with some surprises to come – but on November 7th when Trading Direct goes online for sales I can assure you the pricing will be competitive against every otherAustralian based source of cars and parts.

Viewing 25 posts - 2,026 through 2,050 (of 4,827 total)