magtec_racing
Forum Replies Created
-
AuthorPosts
-
i seen plasma’s stomp on nml’s thats why people started useing plasma’s.
i race at a track and do scale drags and my plasma just spamk’s nml’s and i can buy 5 plasma’s for the price of 1 nml.
nml= stock Tamiya hyperdash motors with pn bb cans that are polished and pn brushes. anyone can do what hes doing hes a fin can swaper. anyone who handwinds motors can back there clames up with dynos but so far he hasent showed me 1.
oh yeah i use a minizracer.com diff “anodized at home and it was kinda easy if you wanna know how pm me found out how to do it in a hot rod mag.” and i polished the rings with motheres alu. and mag polish. its like butter.
oh yeah the only fact nml is knowen is becouse his friends are like there so fast you cant beat them but everyon knows the plasma just bi tch slaps it. useing a plasma dash is like bringing a hawitzer to a knife fight.
should be able to. just test it on a buddys car lol
alot of people doing handwounds but if you could get a dyno on it that would rock. also use blue wire everyone likes blue but no one uses blue wire.
new gear sets for higher torq and higher speed made from derlin. tested the proto and they work nice.
alu. rims dident work out there to small but we did make a set of proline gumbys for a mini z.
titanum axxles would whare the plastic to fast you would need a tini. axle and it would be about $10 so we ditched that idea.
cf chassy wont work. just like a pan chassy idea its to small and will have to much flex.
makeing up a dual motor holder so i’ll let you guys know when we test it.
site is beaing worked on makeing a flsh intro on it so its gonna be down for about a week and we will use our new real site not the geocities crap.
its cool as heck. i got to drive 1 at a hobby shop and loved it only reson i dident buy is is becouse im wateing for them to make a xxx4 version and wateing for the new losi monster truck.
losi won me over with there rtr radio gear they raised the bar in rtr then put a dig. servo in there mini xxxt. i was with rc10 but not anymore losi give alot more bang for your buck.
talking to my guy who makes all my maxx parts about rims for bits. the rims will be roush ser. 3 becouse there allready programed and we just gotta scale um down.
made a alu. stering bracket going to test it then post some pics after i polish it.
i think its cool i hurd speeds on it are about 23mph i dont know what kind of motor they used but im wateing for a mini xxx4
Were trying diff types of plastic. and the alu. suspen bar is a grate idea for bits with dual cells thats hard to conrole and will put some weight on the front tires.
heres what i got.
chassys that are lighter
chassys that are clear and diff shades of clear “blue green ect”
Alu. suspen. bars
gold plated motor contacts.they tryed to make it better than the maxx but forgot that the maxx has ben updated and all the mayjor bugs were fixed.
oh yeah can anyone post some pics of this?
sounds kinda cool never seen it in the us tho. but i guess if you buy rc mags alot and if its a good mag then its worth it but if your doing it for the car its not worth it.
but if you dont have much money and wanan finance a rc car this sounds like the way lmao
ice i had a tl-o1 and i used a 1500 “back in the day” and got about 25min run time off it.
the tl-o1 is a nice car to start with not to hard to put togher handles well for its price and most of all its kinda quick for beaing a lvl 1 car.
i would say get a duratrax inpulse peek charger if you can get them in aus. they make a really nice $50 charger that i use as a back up becouse its about the size of my hand and fits in my pit box easy.
as for the batt pack this is a good deal and some deacent cells, Team Orion V-Maxx Super Duty 2400 E-Maxx Battery (2) $37.99 for 2 packs good deal
those will give you some run time and when your driveing 1 can be chargeing.
hmmmm the xxxnt has a much faster motor and a better radio its also alot more advanced than the gt. i love rc10 and the trucks ben around along time but i like the xxxnt becouse it has a better remote faster motor and just about the same 3rd party suport
grass is even hard on nitro motors but the stocker thats in the baja is enought for a girl lol im shure she aint into the speed that a handwound or a 13 turn would dish out
im talking about rtr standards i know all the roat tules and 19 turn is now the new stock motor is and its just a matter of time befor they lower it to 19. and most clubs call box stock motors stock 🙂 so that makes the 19 turn stock in there eyes.
the baja is a farly cheeply made car so your not gonna be able to drop a 10 turn fantom in it without brakeing some stuff.
chances are shes driveing it on the street and gass every now and then and a 16 turn speed gem will give her some power in the gass. grass kills 19 turns
pics should be up on our temp. web site in about 2 days. we just did a supermaxx chassy and sprayed a 2mm coat on the lowere arms, bottom of the chassy, and skids.
And all we offer is black at this time outher colors are for factory racers only.
um not.
We just started our clod chassy, i just got the ok from thundertec to use there specs for 4 link mount dimentions and shot mount diamentions.
chassy will be 3.5-4mm kevlar reinforced cf and 4 links and cantileavers will be made from magnesum. Full kit should run about $450usd and will include everything needed to install it. only items needed from a stock clodbuster are gear’s gear boxe’s tires and rims. thundertec offers new and used gear boxes for $50 used $55 with bearings to $70 new $75 new with bearing
19 turn is the typical stock motor now i say go to a 16 turn or maybe a 15 turn speed gems
were getting a better site its beaing made right now. should be a week till its up and running. were going to stock alot of parts and sell them in our online store.
dabateing what size carbonfiber plates we should sell we can get gold red blue yellow silver white green carbonfiber.
Were are now offering full race cars and trucks. so far we will offer losi xxx xxxt rc10 b4 and t4 traxxas stampeed and rusler
our onroad will be traxxas 4tec rc10 tc3 losi xxxs.
minis will be hpi micro rs4 kyosho mini z dynamite pocket rockets
Heres whats up you tell us what you wanna do and what you wanna spend and we hook you up with a race worthy rolling chassy with parts to what color you want
thanks for the feedback everyone seems to want those colors.
vr4 sent me this how about colors that fade into each outher like a green to yellow or a blue to green ect. how would you guys liek those.
also were gonna have a bit chop shop you need any single part from a bit we got you covered.
lol at 90,000 rpms the wire would fly off the armture. check and see how meny g’s you get at 90,000 rpm’s the thin wire cant handle the force it would be under and distroy its self.
lol at 90,000 rpms the wire would fly off the armture. check and see how meny g’s you get at 90,000 rpm’s the thin wire cant handle the force it would be under and distroy its self.
i seen vr4’s work and its nice. anyone can make a 10 turn its not very hard if you can do math. i have seen some 17turn hex’s that were so fast they spun apart in the can.
pm him and ask him about his sleeper .15fe lmfao the block and head are fe the rest is nova rossi vr4 is the biggest cheater i know but funny thing is he dosent get cought lmao. i thought it was funny when his “stock” hpi rs4 pro 2 beat my big block rs4 pro 2 and he was useing a poopy little .15fe then he showed me what was in the eng. lmao.
if you ever need any cnc work hes the man to talk to as soon as i can i’ll show you some stuff he made for me like my chassy he put my companys logo on and a set of the best rims in the world proline gumbys 🙂 there so cool, he made a set for my tmaxx.
tip dont try to race vr4 unless your packin some firepower 🙂 my maxx owned him lmao but he was a factory driver for thundertec racing but he changed to nitro and they wouldent give him blue carbonfiber just white or black.
if you ever wanna cheat and not get cought ask him how
i think hes saying he handwound it lmao but at 90k rpm’s the motor will rip its self apart. and i think hes saying he has neo magnets in it.
let me be the first to call B.S.
if he can hand wind a motor that small and make it a 9.0 im voteing for him for the best custom motor maker in the world.
-
AuthorPosts
