merc-blue

Forum Replies Created

Viewing 25 posts - 301 through 325 (of 1,455 total)
1 2 3 … 12 13 14 … 57 58 59
  • Author
    Posts
  • February 14, 2005 at 2:26 am in reply to: it’s *official*, the plasma dash smokes the NML v2 #21409
    merc-blue
    Participant
    • Posts: 1547

    remember alot of americans a xmodders

    February 11, 2005 at 3:37 am in reply to: Shelby GT-500 #58443
    merc-blue
    Participant
    • Posts: 1547

    UA try rcmart .. they have a few lipos avalible also http://www.master-instruments.com.au (i think) .. ont u find master instuments they have TONS

    February 7, 2005 at 3:32 am in reply to: merc-blues crowd pleaser #21534
    merc-blue
    Participant
    • Posts: 1547

    ok jamie choices are
    http://www.tamiyausa.com/product/item.php?product-id=18049. one of these then converted to RC propo with proper drivetrain etc and proper suspention etc..
    or
    a BCG modded to use a tiny servo and stuff to be full digital propo

    either way i have a set of specialised RC equiptment thats all ectreamly small thats gonna be used in sumthing

    February 6, 2005 at 10:08 pm in reply to: merc-blues crowd pleaser #21541
    merc-blue
    Participant
    • Posts: 1547

    had to be one of ya.. maybe leon..

    February 6, 2005 at 9:52 pm in reply to: merc-blues crowd pleaser #21543
    merc-blue
    Participant
    • Posts: 1547

    bloody betty.k im not a idiot.. (it must have been him)

    February 6, 2005 at 8:31 pm in reply to: merc-blues crowd pleaser #21545
    merc-blue
    Participant
    • Posts: 1547

    yeas full shaft AWD with stteering

    February 6, 2005 at 4:39 am in reply to: Where do they make bit char g ? #21552
    merc-blue
    Participant
    • Posts: 1547

    tomy are a japanese company.. but yeah there probly made in factorys in china

    February 4, 2005 at 6:10 pm in reply to: bit wet, eh? #21566
    merc-blue
    Participant
    • Posts: 1547

    yeah i didt even know how bad it all was untill i saw it on a TV at pizzahut waiting for lunch sydney copped it bad.. i lost a tree that took out my back fence other than that we didnt take much bet lots of flooding and downed trees

    February 3, 2005 at 4:18 am in reply to: When an Engineer… Part 2 #21617
    merc-blue
    Participant
    • Posts: 1547

    nah im not as fussy as you on drivetrain i just wanna get bearings on the rear axel and front wheels (tyred once an was a disaster)

    February 3, 2005 at 1:46 am in reply to: When an Engineer… Part 2 #21604
    merc-blue
    Participant
    • Posts: 1547

    toyo.. i will soon have a full proportional (using PROPER eletrics) BCG.. i was just wondering if i could send it to ya and u could put some bearings in it and see how ya like playing 😉

    February 3, 2005 at 1:16 am in reply to: Where do ya get Char G hop ups in Aus ? #21603
    merc-blue
    Participant
    • Posts: 1547

    best place was probly toyeast but they dont have much micro arounf anymore

    Edited by – merc-blue on 02 February 2005 20:30:44

    February 1, 2005 at 3:11 pm in reply to: Berserker IW-04 – Some help would be appreciated #58342
    merc-blue
    Participant
    • Posts: 1547

    slexlaw done much soldering before?.. if not BECAREFUL its easy to kill the iwaver as nismo just learnt i would suggest reading a “how to” thing

    February 1, 2005 at 4:46 am in reply to: Berserker IW-04 – Some help would be appreciated #58336
    merc-blue
    Participant
    • Posts: 1547

    slexlaw its not glitchingwhen the TX is off thats more of a built in warning to say hellow im still on.. (really more like where the hell is my signal

    January 27, 2005 at 4:37 pm in reply to: i need a good rc charger #58284
    merc-blue
    Participant
    • Posts: 1547

    betty mod racers charge slow becasue they get more runtime that way.. but us other divisions dont need the runtime (mod racers can only just finish a race) so we opt for more punch.. think og it this way more current = more punch less runtime less current = more runtime less punch.. its about working out whats good for you

    January 27, 2005 at 3:57 pm in reply to: my new monster bug video!! #58283
    merc-blue
    Participant
    • Posts: 1547

    i had a cat.. it got run over by a truck.. AHAHHA

    January 26, 2005 at 4:05 pm in reply to: foams from the ausmicro shop (little review……) #58263
    merc-blue
    Participant
    • Posts: 1547

    ok guys in 1:10 raceing with foams we run wider ones on the rear even though were AWD it has to do with shift od weight and stuff (also witha front one way gear u need as much surface area on ur rears asposibble the weight never shifts forward (notmaly under brakeing it doe but with a one way although the wtihgt goes forward all ypu breaking is done with the rear and also all ur throttle is done with the rear.. abssicaly more surface area more power u an put down.. also foams alround should be better on most surfaces than rubbers all round

    January 26, 2005 at 1:47 am in reply to: my new monster bug video!! #58257
    merc-blue
    Participant
    • Posts: 1547

    snowy “tha bitcrusher” .k LOL..looks like one angry ass cat

    January 25, 2005 at 6:05 am in reply to: THE ULTIMATE HUMMER #22470
    merc-blue
    Participant
    • Posts: 1547

    z beam did some one say wild char g?

    January 24, 2005 at 4:28 pm in reply to: i need a good rc charger #58212
    merc-blue
    Participant
    • Posts: 1547

    bah thats bull shit.. that runtim is standard for a 3000 specialty charging at 1.5A if u cahrger at 3-5 u will get more punch (LOTS) and lower runtime.. which is alot better no use going slow for ages when ya cna go fast for still about 15-20 mins

    January 24, 2005 at 2:56 pm in reply to: i need a good rc charger #58207
    merc-blue
    Participant
    • Posts: 1547

    leon hthe superbrain has 2 output (i think) like teh yokomo charger allowing you to charge 2 packs.

    kev. remember these cells are being discraherged in ur car at 80A is (dependng on ur motor) so cahrgeing them at 5 is nothing.. were not playing with cheaply made AAA any more when ya buy real batterypacks there is a reason that there expensive firstly the manufacering proces is very precise and produces arwsome cells
    these are the numbers of ym new cells.. imagine how good teh cells must be to perform like that. capacity is roughtl 4000 MAH
    Discharge time (SEC): 613 seconds
    Average voltage (AVG/V): 1.214 volts
    Internal Resistance (IR): 2.5
    Cell Capacity (Mah): 3967
    :shock::shock::shock::shock:

    January 24, 2005 at 2:25 am in reply to: i need a good rc charger #58191
    merc-blue
    Participant
    • Posts: 1547

    yeah cause ur cutmof os very low i run like 60mv ro 120mv dependsing on the batters also 4-5A is about a standard charge rate i would cahrge 3 MIN..

    January 23, 2005 at 4:43 pm in reply to: i need a good rc charger #58180
    merc-blue
    Participant
    • Posts: 1547

    kev… 1.5A thats crazy.. i cahrger mine at 5.. most racers do try it u will see a HUGE increase in punch.

    January 22, 2005 at 4:38 am in reply to: GPM V2 Turbo #58156
    merc-blue
    Participant
    • Posts: 1547

    azza are you hooking it all up right?.. sounds like a bad connection or sumthing

    January 21, 2005 at 8:03 pm in reply to: my “Woah Nelly!” Turbo…. #58137
    merc-blue
    Participant
    • Posts: 1547

    shit is been around the 30s all the time its great.. yeah enjoy..

    January 21, 2005 at 8:01 pm in reply to: i need a good rc charger #58136
    merc-blue
    Participant
    • Posts: 1547

    cool tell us how it goes..

  • Author
    Posts
Viewing 25 posts - 301 through 325 (of 1,455 total)
1 2 3 … 12 13 14 … 57 58 59