merc-blue
Forum Replies Created
-
AuthorPosts
-
empire the reason its so cheap is becasue parts are not easy to get and also its a REALLY old model
betty E maxx runs 2 550 motors at 12cells.. but they convert them do single BL .. i would love to do one dual BL.. and betty wait till ya see my dual motor monster
i would do alot more than 2 coats.. i tend to do about 10 thin coats it gives u a arsome covering and solid flawless colour
yeah problly i might have to buy a set or 2 of the gmaxx to check them out
kev.. it depends on ur packs if teh GPs were built poorly or over changed or wat not that would explain ther lack of permormance but i can guarrente the best cells u will get are matched GP3300s
seatbelt u looking for a car my car is RTR for 250 bux.. less than you can get justa TB02 chassis its in tob cond.. it came pre assembled but i took it apart and now its super smooth check the link in my sig if ya interested 250 includes no charger but i can get ya one for 30 bux
yeah go a nelly 😀
TD the M04 is just cool much more differnet fomr the M03 and TT01 and FF02 cars. (all teh same) also RWD if fun to drive
yeah the M03 is great fun.. i with i still had mine.. when tehy allow M04 to race with them M03 im gonna do a racem04.. eg every hop up.. matched stick packs LOL.. u name it
empire.. TB02 localy will cost
250 for kit and a TEU esc (rated only to sport tuned motors
100+ for a radio kit cheapo stick wheels start at aobut 130
30 dolars for the most basic charger
30 dollars a battery pack
10 bux a can of paint for ur shelletc
and then hop ups.. eg alloy shaft alloy motor mount WTC.AHAHAHAH TD.. HPI came 2nd adn 3rd and tehn at the DHI cup hara blitzed reinhart.. also teh TT01 compares NOTHING to the 415 (world champ car) belt/shaft .. also teh evo4 driven by shurikarn (last years world champ) was crap (the evo 4 not shurkarn)… now shurkarn drives a HPI doingbetter with it than teh evo4.. in my opinion (and probly virgin atlantics .. although wont admit it) the sprint is better.. lol
or try my HPI sprint.. no problem with parts u will never brake it if ya need parts can get them form sydney or america.. it is alot more racebred that the tt01 but abit more expensive but it does come with form facy stuff like a better ESC and wheel radio and also a matched pack (cost aobut 100 dollars new.. this one has abit of gravel rash on one cell still works 100%)
yes it will come with xtals and look out make sure its a 27 or 29 not 75.. 75 is illegal in australia
yeah i do the same never run it on a limit.. and pandawould u run a 15T on a 80A esc?
betty technically there mine.. just gotta pick them up
snail pace u want speed u get worn brushes trinity d6 probly fastest motor around tears brushes apart but is probly the fastest 1:10 motor around.. my 9×1 will kill a BL
yeah.. if ur gonnna use a IW TX well.. enjoy. buy a 27megAM RX.. smaller is better.. futaba or Jr are good and a 3003 is good if ya wnat better get a hitec cheap and faster
get a GOOD speedy best u can budgetoh ok.. baja champ are arite.. not fast enough for me.. i race a xray T1 fk and bash a savvy 25
mocky. personly i think ur doing it the hard and more expensive method.. but its your money
.. the novak XRS is reated to 40 amps a cheap 1:10 esc is rated 200 amps it would only handle silver can or sport tuned motorsas for radio gear why do you want to buy a RX and servo seperatly?
that servo is only .01 seconds faster so not really any better than a S3003 and both will break just as easly (never if your running a good servo saver)maybe u should look at sumthign like this:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBJA6**&P=0100 USD
if you just bought a RX and servo what TX would u run?
WA_Rc wat 1:10 u have. i assume seeing u dont have a 1:28 u have a 1:10
nah betty u got it all wrong.. any thing with a less tah 8 cells and u cant adjust the speed curves of the servo and servo return speed is a TOY.. lol my new radio has over 100 pages worth of manual
teh sports tuned motor is the ultimate M03 motor. its a good 25% faster than teh silver can..
betty. if its a xmod teh trimpot is more to tune the frequency..put 1 10k resistors on the pot aswell helps
thats speddy is for 1:18 even a low rated 540 motor will blow it
as for RX/servo its about the same to get a whole new kit so ya get a new transmitter (better than what u would be using with these).. i would suggets somthing like http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXENN3**&P=0
is a very good radio for beginners and intermadiate racing..
as for that motor.. well i wouldnt touch a motor that isnt rebuildable.. if ya gonna race ur gonna probly need a 540 silver can to start with and then get a stock (27T) motor when u go up a class.. but 5430pro istons fast enough for ur first 8 months – year if you are bashing i would suggest http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCUP8&P=7or check this out 😀
http://www.ausmicro.com/topic.asp?TOPIC_ID=3027&FORUM_ID=23&CAT_ID=7&Topic_Title=HPI+sprint+FS&Forum_Title=nonMicro+RC+%2D+Forsale+%7C+Want+%7C+Swap
i can get you radio gear motors batterys chargers ETC to get it RTR if your interesteda good xmod will kick a mini-z ass.. just tap him he will break a knuckle or a servo gear and u can keep going
-
AuthorPosts