peteWah

Forum Replies Created

Viewing 25 posts - 426 through 450 (of 998 total)
1 2 3 … 17 18 19 … 38 39 40
  • Author
    Posts
  • December 17, 2004 at 5:55 pm in reply to: Sunday Races……..Sydney GTG!!!! #23569
    peteWah
    Participant
    • Posts: 1020

    I guess i will see you there then:smiley2:

    December 17, 2004 at 5:32 pm in reply to: 15 min chargers in AUS!!! #23571
    peteWah
    Participant
    • Posts: 1020

    that duct tape is to put over your BIG mouth:D

    December 17, 2004 at 5:31 pm in reply to: 15 min chargers in AUS!!! #23582
    peteWah
    Participant
    • Posts: 1020

    And your a almost 18 year old hot head toss, but a nice guy im sure, just have it out for me> most of the time

    BTW
    Did you not rip this of another site…

    Over priced Toy car which uses Over priced Cordless drill batteries with Over priced Toy Tires and a Over priced Body made out of old 2 litre milk bottles all for….a 5 dollar trophy once and awhile…..what a Hobby
    :angry::angry::angry::evil::evil:

    December 17, 2004 at 5:08 pm in reply to: 15 min chargers in AUS!!! #23584
    peteWah
    Participant
    • Posts: 1020

    You should know by now not to take things i say to heart…
    Everyone should !!!
    And what i was trying to say is that most chargers that charge AA should also charge AAA if they dont they are stupid…
    Sorry Leon.
    :smiley2:

    December 17, 2004 at 4:58 pm in reply to: First time painting a 1/10 Body. #57591
    peteWah
    Participant
    • Posts: 1020

    As for painting advice, Nice even controlled strokes> Dont cake it on there…
    Like i did the first time around :smiley2::D:D:dead:

    December 17, 2004 at 4:50 pm in reply to: 1/10 nitro shopping advice.. #57590
    peteWah
    Participant
    • Posts: 1020

    I dont need to, and wont use it for such a application !:smiley2:

    December 17, 2004 at 6:21 am in reply to: Sunday Races……..Sydney GTG!!!! #23597
    peteWah
    Participant
    • Posts: 1020

    Finally sorted are we, YES >GOOD
    Bring on the hair:D:D:approve::smiley2:

    December 17, 2004 at 6:13 am in reply to: 1/10 nitro shopping advice.. #57586
    peteWah
    Participant
    • Posts: 1020
    Quote:
    petewah, WD-40 is a very good trick!, spray your whole chassis down with it, let it dry overnight and dirt will have a very hard time holding on…

    It wont be rid of the pvc though > Is what im saying< did i say there was anything wrong with WD…

    ENUFF SAID
    :smiley2:

    December 17, 2004 at 5:57 am in reply to: “Sanyo” AAA NiMHs #23599
    peteWah
    Participant
    • Posts: 1020

    This i knew but for anyone who did not its good infomation.:smiley2:

    December 17, 2004 at 5:50 am in reply to: First time painting a 1/10 Body. #57585
    peteWah
    Participant
    • Posts: 1020

    I will even lend you a Camera, So many cars to see…

    December 17, 2004 at 5:26 am in reply to: 15 min chargers in AUS!!! #23598
    peteWah
    Participant
    • Posts: 1020

    The Charger allows for both battery sizes stupid :evil::D:smiley2:
    If it dont then its stupid because most chargers do both and i have not seen one that dosen’t

    December 17, 2004 at 5:17 am in reply to: Announcing: SHOP.AUSMICRO.NET #23601
    peteWah
    Participant
    • Posts: 1020

    Will chat to you about it by phone ok Aaron, but a BIG yes on the ready set, Its as simple as knowing if im getting the all yellow or the yellow and white…
    and a X speed Iwaver pro motors as well, All this for 200Aud or there abouts and we are in shape…
    I as Dave just need to know when to get money to you.

    Cheers Mate

    December 15, 2004 at 5:48 pm in reply to: melbourne, wanna break more toys? 28/11. #23651
    peteWah
    Participant
    • Posts: 1020

    I realy want to send you these shells Z beam, there would be no hurry on the work that needs to be done.
    You can have some cash and a Tamiya Torque Tuned that you wanted, I remeber reading at some point for the Cammaro you wanted 1
    And i will give you back the green stuff If i get the nod from you (nothing sinister here people) PM me please:smiley2:

    P.s will you be in Berry or Biron for Christmas:smiley2::):smiley2:

    December 15, 2004 at 5:37 pm in reply to: Sunday Races……..Sydney GTG!!!! #23650
    peteWah
    Participant
    • Posts: 1020

    Sorry; here we go where, lupi Fucken lu

    December 15, 2004 at 5:31 pm in reply to: 1/10 nitro shopping advice.. #57560
    peteWah
    Participant
    • Posts: 1020

    LOL, no no no and we will leave our differences at that :smiley2:

    December 15, 2004 at 4:57 pm in reply to: 1/10 nitro shopping advice.. #57558
    peteWah
    Participant
    • Posts: 1020

    You need a air compressor mate as much as it wont clean everything (thats my opinion) It will come in handy Not WD.
    Try real drift wheels :smiley2:

    December 15, 2004 at 4:50 pm in reply to: 1/10 nitro shopping advice.. #57557
    peteWah
    Participant
    • Posts: 1020

    Its a chore, BTW the WD in WD-40 stands for Water dispersal, Not PVC remover

    You need PVC dispersal 2000, just jokes mate…

    You are going to spend more time cleaning than racing/drifting
    My point is not the car, You will have fun im sure, Its the extra work you will have because its going to be used for drifting using pvc…
    But Anyways have fun with it :smiley2:

    December 15, 2004 at 4:13 pm in reply to: 1/10 nitro shopping advice.. #57555
    peteWah
    Participant
    • Posts: 1020

    And your going to use this for drifting, I can see some members would think you to be stupid as do i for using pvc on a NTC3 or any gas car for that matter.
    Nice car BUT not a drift car in my opinion and you are going to hate the cleaning of this thing no end even more knowing that its going to have a coating of pvc flake that is going to get just about anywhere you can emagine…

    thats my 2 cents, But What would i know, Good luck :smiley2:

    December 15, 2004 at 3:28 pm in reply to: I WAVER QUESTION #57554
    peteWah
    Participant
    • Posts: 1020

    More than a yikes, Its a >steer clear it sounds like Chief

    December 15, 2004 at 3:23 pm in reply to: Sunday Races……..Sydney GTG!!!! #23660
    peteWah
    Participant
    • Posts: 1020

    Buy a real set of drift tires:evil:

    December 15, 2004 at 4:54 am in reply to: it’s *official*, the plasma dash smokes the NML v2 #23677
    peteWah
    Participant
    • Posts: 1020

    Cheers mate
    Pm me you mobile phone number If cool so we can have a chat :smiley2:

    December 15, 2004 at 12:25 am in reply to: iWaver 04 cheapy bound to break on first day #38983
    peteWah
    Participant
    • Posts: 1020

    Good job dude:smiley2:

    December 14, 2004 at 11:00 pm in reply to: my “Woah Nelly!” Turbo…. #57543
    peteWah
    Participant
    • Posts: 1020
    Quote:
    sorry to be off topic but merc blu ur badger looks like he’s taking a ‘dump’!
    rotflmfao:evil:

    Thats his ball sack !!!

    December 14, 2004 at 10:46 pm in reply to: Sunday Races……..Sydney GTG!!!! #23687
    peteWah
    Participant
    • Posts: 1020

    Yeah and, A air compressor is not going to get all the stuff out of a motors guts of a mini z and it gets into the servo box as well as dave said…
    (crunch break replace, no thanks)
    That being said you can guess that my gripe is that its more maintainence for all :smiley2::smiley2:

    December 14, 2004 at 10:17 pm in reply to: iWaver 04 cheapy bound to break on first day #23688
    peteWah
    Participant
    • Posts: 1020

    You get what you payed for, Sour grapes

  • Author
    Posts
Viewing 25 posts - 426 through 450 (of 998 total)
1 2 3 … 17 18 19 … 38 39 40