Shypo

Forum Replies Created

Viewing 25 posts - 2,001 through 2,025 (of 2,317 total)
  • Author
    Posts
  • in reply to: motors #42419
    Shypo
    Participant
    • Posts: 2339

    the_bit read a post properly before posting a reply, i didnt say the car was still on the dyno did i. WHEN THE CAR COMES OFF THE DYNO IT WIL DRIVE NORMALLY. SO WITH A BIT THE R-SPEC HAS ENUF TORQUE TO DRIFT. ok

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Trouble removing mini cripple capacitor #44531
    Shypo
    Participant
    • Posts: 2339

    it wont cut off, been there tried that. you will have to use a very hot and high wattage iron to take it off

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Trouble removing mini cripple capacitor #42418
    Shypo
    Participant
    • Posts: 2339

    it wont cut off, been there tried that. you will have to use a very hot and high wattage iron to take it off

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Spring Suspension #42417
    Shypo
    Participant
    • Posts: 2339

    you have to dissasemble the front end first. for most of these mods i seriously recommend you check out http://www.questformadness.com

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: My bit is ruined!! #43745
    Shypo
    Participant
    • Posts: 2339

    you could go to tandy and enquire about a new magnet and check out qfm for a steering spring replacement mod

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Best of the Bit Clones??? #42422
    Shypo
    Participant
    • Posts: 2339

    ok, first things first. the range on the older cars i have seems a tad better but other new cars have cripple capacitators whcih can be cut off and you will then have the same range (usually)
    LXX’s only come in a few different styles compared to BCG the LXX’s come in 4 plain skyline colours and 5 different race spec colours, most of these are a clean cut rip off of BCG. the calsonic is a LXX special edition with a so called 1500 ever made. my advice is steer clear of clones until you want to try some radical modification becos BCG are the orignal and imo the best

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Best of the Bit Clones??? #44530
    Shypo
    Participant
    • Posts: 2339

    ok, first things first. the range on the older cars i have seems a tad better but other new cars have cripple capacitators whcih can be cut off and you will then have the same range (usually)
    LXX s only come in a few different styles compared to BCG the LXX’s come in 4 plain skyline colours and 5 different race spec colours, most of these are a clean cut rip off of BCG. the calsonic is a LXX special edition with a so called 1500 ever made. my advice is steer clear of clones until you want to try some radical modification becos BCG are the orignal and imo the best

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Downhill Rally course #43786
    Shypo
    Participant
    • Posts: 2339

    posterboard is a very very good idea. hows the progress on the track Racer9?

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Compact Char-g #42427
    Shypo
    Participant
    • Posts: 2339

    clones in australia are released on “safe” frequencies. in another threead it tells you which frequencies are “dangerous”
    dude if anyone knew what the new compact is then i am sure it would be all over the internet now. i think JNH may be stringing us all along

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Initial D #42426
    Shypo
    Participant
    • Posts: 2339

    did you ever have an Atari Boungh, i think mines still in the basement LOL

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: new Bit Char-G promo items #42436
    Shypo
    Participant
    • Posts: 2339

    yeah i should have jumped on that but didnt:sad:
    i am actually getting the Voltz tho. when i get toghther a bit more money (thank god for the public holidays) i am going to buy a Voltz and a calsonic and posibly a NUR

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: another rare bit uncovered. #42439
    Shypo
    Participant
    • Posts: 2339

    yes now that would be awesome. the Shypo rim. has a nice ring to it dont ya reckon:D
    has to be extremely bling bling and can only be fitted to cars which live up 2 my expectations in Pimpness

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Downhill Rally course #42440
    Shypo
    Participant
    • Posts: 2339

    i was making it out of housing insulation, it was becoming very hard and very costly. it would be great if someone makes one but otherwise its a very hard thing to do by urself

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Unbranded unpainted MiniZ bodies #44527
    Shypo
    Participant
    • Posts: 2339

    i am just going to start mounting 1:24 scale models on my Z, alot cooler looking and alot more stable

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: How long till…. #42441
    Shypo
    Participant
    • Posts: 2339

    well this post is number 1392, so therefore we have 609 posts till i break it so if there is a mathematical equation for that then theres your answer considering i post like 15-20 posts a day.

    c’mon people you have to have some idea on how long it will take. dont just look, VOTE

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Disc Brakes For Mini Z #44526
    Shypo
    Participant
    • Posts: 2339

    i see you now have 2 cars Barrell, dude this is becoming an expensive hobby huh

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Your Mini-Z? #44525
    Shypo
    Participant
    • Posts: 2339

    and when i can actually drive legally i will get a 22B

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: custom bits #42442
    Shypo
    Participant
    • Posts: 2339

    that really sux, i have tried so many different things for decals, i bought sum clear labels:sad:
    some actual sticker paper-way way to thick:sad:
    now some proper decal paper but i have like 1/2 a sheet left

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Western Creek Raceway #42446
    Shypo
    Participant
    • Posts: 2339

    sorry man, please dont call the cops. just kiddin i get the po-lice in here and start shooten dem up, i would have to go down in style…..

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: The rarest Bit Char-G of them all..only 50 made #42444
    Shypo
    Participant
    • Posts: 2339

    i think LE stuff should be a little more than a single colour bodyshell

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: Western Creek Raceway #42443
    Shypo
    Participant
    • Posts: 2339

    exactly the one, i seriously cannot believe its such a huge fine for something like that, worst bit is i have all those frequencis, looks like im screwed LOL

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: motors #42450
    Shypo
    Participant
    • Posts: 2339

    a Dyno is a bunch of rollers whcih a car sits on and when the caris started it turns the rollers, the car doesnt move it just spins the rollers, the rollers are connected to a graphing system which records the power output of each gear and RPM.

    and about the R spec motor, its is extremely fast and very very torquey’ some ppl can do proper controlled drifts with it

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: custom bits #42449
    Shypo
    Participant
    • Posts: 2339

    i have decided to copy the C-west Rx7 race car as a BCG project and the moulding of the bodykit and stuff isnt hard, tracking down the decals and applying such tiny decals in cefrtain areas is very very hard, 27USD????? man thats like $50AU for decal paper

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: motors #43746
    Shypo
    Participant
    • Posts: 2339

    do you know what a Dyno is?
    on the motor subject i sugest the tiny-rc R spec motor, the speed of a 3.4-3.6 and the torque of 2×1.6’s

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

    in reply to: How long till…. #42452
    Shypo
    Participant
    • Posts: 2339

    i honestly think with the amount of stuff i talk about and ask q’s about i reckon 1 month

    —-
    Go Fast, Be Free with Low CC

    Undisputed Post Pimp

Viewing 25 posts - 2,001 through 2,025 (of 2,317 total)