bithed

Forum Replies Created

Viewing 25 posts - 51 through 75 (of 641 total)
1 2 3 4 … 24 25 26
  • Author
    Posts
  • April 5, 2005 at 8:16 pm in reply to: Mini Cooper M03 Shell Painting #59190
    bithed
    Participant
    • Posts: 680

    …These are M-03 chassis bodies though..3rd party, made locally here..I have never seen them else where though…

    April 5, 2005 at 6:14 pm in reply to: Mini Cooper M03 Shell Painting #59188
    bithed
    Participant
    • Posts: 680

    …any interest in these if i can get them?

    lancerj.jpg

    imp1j.jpg

    …I will start another thread if you need more…

    April 5, 2005 at 5:18 pm in reply to: Mini Inferno Street Price…. #59187
    bithed
    Participant
    • Posts: 680

    …The half 8 ROX…I thought the 18T was pretty cool but the Half 8 buries it in the long term…The ONLY issue I have had so far with LOTS of bashing is…well…nothing really…The hex hub sux…they are small and tiny and NOT 12mm…other than that its a beautiful but extremely hard wearing platform…RC mart has sold me a ESC and a Hitec servo this week…Have to dance with the devil occassionally 😀

    March 14, 2005 at 11:45 pm in reply to: …Mini Inferno Countdown… #58919
    bithed
    Participant
    • Posts: 680

    …BETTY check PanicToys for all the gossip 🙂 More will be revealed in a few more days…

    March 14, 2005 at 11:14 pm in reply to: …Mini Inferno Countdown… #58915
    bithed
    Participant
    • Posts: 680

    …it only stays on with one clip…its coming off straight away…same as the exhaust out the side…leaves a hole in the body but thats easily fixed…a few lexan patches and a big PanicToys sticker and you are away laughing 😀

    March 14, 2005 at 5:36 pm in reply to: Classic inspired Mad Force #58909
    bithed
    Participant
    • Posts: 680

    ..Hmm…thought it might be…it looked familiar 😀

    March 14, 2005 at 4:26 pm in reply to: Classic inspired Mad Force #58906
    bithed
    Participant
    • Posts: 680

    …nice work arch…looking good..you are getting better and better 🙂 Its going to be fun for us to start on the lexan bodies too…I really need some more time to work on bodies but as you very well know i am pretty maxxed out for time…looks really good…Is that one of the blanks you got from PanicToys?

    March 9, 2005 at 5:38 pm in reply to: Anyone ordered from Tower Hobbies ? #58834
    bithed
    Participant
    • Posts: 680

    …OUCH :angry:

    February 28, 2005 at 5:13 pm in reply to: Breaking News: Kyosho announced Mini-z Boats! #58722
    bithed
    Participant
    • Posts: 680

    …thats weird…the trailer is the charger…

    February 24, 2005 at 12:00 am in reply to: my first project #58661
    bithed
    Participant
    • Posts: 680

    …that reminds me…I have a blank subaru in the shop too…If anyone wants it…I have too many bodies going…

    …Hakhawk looks good though…Looking forward to it…

    February 23, 2005 at 6:57 pm in reply to: Any body heard of a Pureten alpha ep 4wd #58655
    bithed
    Participant
    • Posts: 680

    …still pretty good though if the prices Mini-G mentioned are anything to go by..I know they arent cheap here either…You need any parts let me know…

    February 23, 2005 at 6:43 pm in reply to: Any body heard of a Pureten alpha ep 4wd #58653
    bithed
    Participant
    • Posts: 680

    …Dude thats a HELL good price…

    …4Wd is pretty cool how it works…I learnt alot with my 18T…You are gonna have a ball…especially for 41 bucks..lol…I wonder what the catch is…

    February 23, 2005 at 1:41 pm in reply to: Anyone ordered from Tower Hobbies ? #58649
    bithed
    Participant
    • Posts: 680

    …I dont like Towers shipping either…its VERY expensive..I havent ordered from yhem yet either but you cant go past their pages for useful pics and information, especially their technotes for each item…Actually pretty handy sometimes…Glad to hear i went well though betty..

    February 18, 2005 at 4:57 am in reply to: what colour pn products would you really like? #21350
    bithed
    Participant
    • Posts: 680

    …kichen bleach…empy GLASS jar…bleach in jar…part in bleach…add smalll pieces of steel wool to taste…shake occassionally…prod with a tooth brush…bucket of water nearby…when cooked to taste remove parts and put in cold water…wash throughtly with soap…have a smoke and watch myth busters…screw it back on and drive away to the cheers of the crowd…Done…Keep out of reach of children and avoid naked flame 👿

    February 17, 2005 at 9:32 pm in reply to: what colour pn products would you really like? #21362
    bithed
    Participant
    • Posts: 680

    …personally i would ONLY get silver or red…as red doesnt exist i am left with silver…the blue parts i HAVE got in the past for whatever platform, because thats all there was, i have kitchen bleached and taken back to silver…

    As a seller its a tricky question…One of each to start with and see what sells first…Blue and silver are alsways safe colours, and the makers know it…Orange is a gamble from a sellers POV…BUT on the other hand if orange IS Pn Racing, ie corporate colour then it should be reasonably safe…

    February 15, 2005 at 9:54 pm in reply to: PN Racing Parts available for Pre-Order! #21387
    bithed
    Participant
    • Posts: 680

    …looks good mate…Get some PN parts into Japan and you will make millions…

    February 15, 2005 at 1:55 am in reply to: Tomy “Aero RC” at rcmart – what are they? #21396
    bithed
    Participant
    • Posts: 680

    …the body is worth the price alone eh…

    February 11, 2005 at 4:49 pm in reply to: Sunday Races……..Sydney GTG!!!! #21466
    bithed
    Participant
    • Posts: 680

    …you DID tell me dopey…:D

    February 11, 2005 at 2:53 pm in reply to: Sunday Races……..Sydney GTG!!!! #21468
    bithed
    Participant
    • Posts: 680

    cool dave..a TC3 ? wow 😀

    February 8, 2005 at 6:52 pm in reply to: Tomy “Aero RC” at rcmart – what are they? #21490
    bithed
    Participant
    • Posts: 680

    …the bodies are pretty good…a little brittle but not bad…not as detailed as a Z but again not bad…the price is VERY good 🙂 Anyway you will see what i mean when you get it…I am sure one of the techs would be able to hop it up to a serious level once thye gave one a lobotomy 🙂 I got the orange demio body…

    February 8, 2005 at 6:41 pm in reply to: Tomy “Aero RC” at rcmart – what are they? #21494
    bithed
    Participant
    • Posts: 680

    …i hope you like it 🙂

    February 8, 2005 at 7:05 am in reply to: Tomy “Aero RC” at rcmart – what are they? #21470
    bithed
    Participant
    • Posts: 680

    …production quality is ‘sketchy’ at best…I have one…Priest could you tell me how much they want for shipping?

    …and yes they are just big bits 🙂

    …apparently Aaron can get them for you too 🙂

    …if anything new comes up i will keep y’all posted…

    February 4, 2005 at 4:03 pm in reply to: Totally Devestated…… #21574
    bithed
    Participant
    • Posts: 680

    …When it rains it pours maye…i have been there 🙁 My MAIN concern is the cornflakes…I hope they are ok…

    February 3, 2005 at 6:19 am in reply to: mini z bar #58368
    bithed
    Participant
    • Posts: 680

    yeah the bcg supra…i loved it…

    February 3, 2005 at 6:18 am in reply to: mini z bar #58367
    bithed
    Participant
    • Posts: 680

    z-beam what are you sanding with? 400 paper takes everything off pretty good…leaves some streaks but its MUCh faster filling in and surfacing than ssoftly sanding IMO…let me guess…its a bright red top coat over a failed yellow job that went over an nunprepared black..lol…gotta love them ‘dirty’ jobs LOL…ohh this sounds like a fun project…can i join in ? lol…

  • Author
    Posts
Viewing 25 posts - 51 through 75 (of 641 total)
1 2 3 4 … 24 25 26