jamiekulhanek

Forum Replies Created

Viewing 25 posts - 1,326 through 1,350 (of 2,484 total)

← 1 2 3 … 53 54 55 … 98 99 100 →

Author

Posts
February 23, 2004 at 4:20 pm in reply to: high aussie doller #36668
jamiekulhanek
Participant
- Posts: 2563
That would be nice, cheap stuff.
February 23, 2004 at 4:19 pm in reply to: “Build RC Car” Mag (or what else we’d buy with $$) #36667
jamiekulhanek
Participant
- Posts: 2563
Well why not??? If i got an RTR, i’d have to rip it to bits and re-build it just to get the satisfaction. I love things that come in kit form, building is half the fun!!!
February 20, 2004 at 8:05 pm in reply to: Mini Z RC Car Clubs Sydney ? #49766
jamiekulhanek
Participant
- Posts: 2563
Interesting, is it springy or does it bend???
February 20, 2004 at 7:54 pm in reply to: “Build RC Car” Mag (or what else we’d buy with $$) #36742
jamiekulhanek
Participant
- Posts: 2563
Im gonna have a go (heck you gotta learn somewhere!!! I’ve got a hoist, tools, etc. ) at rebuilding the top end of my engine, then later on maybe put a dual barrel weber on it with a nissan patrol airscoop ($80 new from nissan dealer) and a small airbox, just to make a boring L20B an eeency bit more fun. It won’t go hard, but i don’t want a car that goes too hard when i’m still an inexperienced driver……unless it’s R/C, where the chance of getting killed in an accident is almost impossible. Lol some people have been killed by scalextric cars, by lying on the ground and watching the cars zoom towards them……..
February 20, 2004 at 7:43 pm in reply to: high aussie doller #36741
jamiekulhanek
Participant
- Posts: 2563
Great!!!! Ah……damn more money to fork out.

I hope the dollar continues to rise, i can remember it was almost half what it is now a while back
February 20, 2004 at 7:04 pm in reply to: Mini Z RC Car clubs in Melbourne ? #49764
jamiekulhanek
Participant
- Posts: 2563
Ill bet $100 you will fall head over hels once that baby comes out of the box. I did, just so much more fun than bits (sorry guys).

I dont know how long im gonna play with r/c’s anymore, 1/1 cars are slowly taking over.

Micro, you love modifying, and the mini Z mod list is neverending.

Edited by – jamiekulhanek on 20 February 2004 14:05:46
February 18, 2004 at 6:46 pm in reply to: Mini Z RC Car clubs in Melbourne ? #49713
jamiekulhanek
Participant
- Posts: 2563
There is clubs in melbourne, just go to The hobby place or hearnes hobbies and ask them.
February 18, 2004 at 6:44 pm in reply to: Mini Z RC Car Clubs Sydney ? #49712
jamiekulhanek
Participant
- Posts: 2563
You need various H plates too DGS, with the grunt of your car they are gonna snap like toothpicks, though a roll shock and horizontal shock might help a bit.
February 18, 2004 at 6:37 pm in reply to: Magtec s tempary site #49711
jamiekulhanek
Participant
- Posts: 2563
Sorry mate
February 17, 2004 at 5:25 pm in reply to: Magtec s tempary site #49679
jamiekulhanek
Participant
- Posts: 2563
magtec/VR4 you have made a bad name for yourself in the past which cannot be changed, and we dont want your tips and crap, we have members on this site such as PandaBear who have more experience abou R/C than you, and know their shit, so take your illegal advertising, pure bullshit and shocking english somewhere else.
February 17, 2004 at 5:02 pm in reply to: Magtec s tempary site #49677
jamiekulhanek
Participant
- Posts: 2563
Quote:

Jamie K = Rocky Balboa. 👿

Spirited Fighter i am 😀
February 17, 2004 at 4:27 pm in reply to: “Build RC Car” Mag (or what else we’d buy with $$) #36872
jamiekulhanek
Participant
- Posts: 2563
Dunno about restoring, but engine rebuilds cost alot.
February 16, 2004 at 6:42 pm in reply to: “Build RC Car” Mag (or what else we’d buy with $$) #36908
jamiekulhanek
Participant
- Posts: 2563
Quote:

Quote:

A Mabuchi RS540 wouldn’t make 60km/h.

Why pay so much for it??? It’s cheap crap!!!

That’s “UP TO” 60, old pal.

(As in… UP TO the Top of the Cliff and chucking it over. :smiley2:)

Ahh, new 540s sell for $15-20 at LHS anyway, no huge ripoff there.

I meant the WHOLE car, shitful quality and a big $780 sticker.
February 16, 2004 at 4:17 pm in reply to: “Build RC Car” Mag (or what else we’d buy with $$) #39831
jamiekulhanek
Participant
- Posts: 2563
Im gonna get the issue with the Rx/Tx, not bad for 15.95 i guess!
February 16, 2004 at 4:16 pm in reply to: “Build RC Car” Mag (or what else we’d buy with $$) #39832
jamiekulhanek
Participant
- Posts: 2563
A Mabuchi RS540 wouldn’t make 60km/h.

Why pay so much for it??? It’s cheap crap!!!
February 16, 2004 at 4:10 pm in reply to: Kitty s Baja! #49640
jamiekulhanek
Participant
- Posts: 2563
id say something like a 19t motor would give you the best of all worlds.
February 16, 2004 at 4:07 pm in reply to: tips from magtec racing #49639
jamiekulhanek
Participant
- Posts: 2563
Huh Girlfriend??? I distinctly remember you said you were married
February 16, 2004 at 4:03 pm in reply to: Magtec s tempary site #49638
jamiekulhanek
Participant
- Posts: 2563
http://www.ausmicro.com/topic.asp?TOPIC_ID=1123&FORUM_ID=13&CAT_ID=4&Forum_Title=MiniZ+%26+Palm+Runner+%2D+Technical&Topic_Title=Plasma+Dash+Motor+Questions+%26+some+other+q%27s&whichpage=4&tmp=1#pid23238

ph2t read this you will laugh yer ass off, i guessed it was him straight away.

Babelfish has better grammar than you VR-4…

Edited by – jamiekulhanek on 16 February 2004 11:04:26
February 16, 2004 at 3:59 pm in reply to: Plasma Dash Motor Questions & some other q s #49637
jamiekulhanek
Participant
- Posts: 2563
Quote:

i seen vr4’s work and its nice. anyone can make a 10 turn its not very hard if you can do math. i have seen some 17turn hex’s that were so fast they spun apart in the can.

pm him and ask him about his sleeper .15fe lmfao the block and head are fe the rest is nova rossi vr4 is the biggest cheater i know but funny thing is he dosent get cought lmao. i thought it was funny when his “stock” hpi rs4 pro 2 beat my big block rs4 pro 2 and he was useing a poopy little .15fe then he showed me what was in the eng. lmao.

if you ever need any cnc work hes the man to talk to as soon as i can i’ll show you some stuff he made for me like my chassy he put my companys logo on and a set of the best rims in the world proline gumbys 🙂 there so cool, he made a set for my tmaxx.

tip dont try to race vr4 unless your packin some firepower 🙂 my maxx owned him lmao but he was a factory driver for thundertec racing but he changed to nitro and they wouldent give him blue carbonfiber just white or black.

if you ever wanna cheat and not get cought ask him how

Hello again Lancer_evo/VR-4, you must think that you are very special indeed.
February 11, 2004 at 5:35 pm in reply to: Post 5000! #37010
jamiekulhanek
Participant
- Posts: 2563
Me winning (technically) now!!!
February 9, 2004 at 5:46 pm in reply to: Anyone made a BCG Car Bra? #49549
jamiekulhanek
Participant
- Posts: 2563
why not paint one on with that liquid rubber stuff??
February 9, 2004 at 5:18 pm in reply to: THUNDERDROME 2004 – Coburg, Melbourne VIC #37052
jamiekulhanek
Participant
- Posts: 2563
Why not rig up a few G-Type Estes motors, they have like 7kg of thrust.
February 9, 2004 at 5:15 pm in reply to: custom offroad land cruiser #49548
jamiekulhanek
Participant
- Posts: 2563
Can i ask why the top pic has rcMart written all over it?
February 9, 2004 at 4:53 pm in reply to: Video of 90km/h MR02 Enzo #49547
jamiekulhanek
Participant
- Posts: 2563
Who says im not gonna film this thing maxxing out???
February 8, 2004 at 3:49 am in reply to: THUNDERDROME 2004 – Coburg, Melbourne VIC #37074
jamiekulhanek
Participant
- Posts: 2563
Not me.
Author

Posts

Viewing 25 posts - 1,326 through 1,350 (of 2,484 total)

← 1 2 3 … 53 54 55 … 98 99 100 →