ken_wyleung

[ken_wyleung]

I am using Lap Wizard now, max for 10 cars.

[ken_wyleung]

For the Carpet, you can try to get them from large hardware shop, the carpet is design for car inside use, very short or not hair; arround AUD20.00 /M.

For the car, we are using Atomic Front 10 degree and Rear 10 degree for MR-02 (MM and RM), Front 20 degree and Rear 10 degree for MR-01. For other hopups,just some standard hopups is fine, like Kyosho Ball Diff, ball bearing, carbon T platewith Atomic Stock motor.

If you have time at Friday night, I will like to show you our race and track in Ringwood.

Enjoy the Mini-Z!

[ken_wyleung]

The AWD and its optional parts will released on Dec 1, and they are some optional parts that I have order:

MDW001 Ball bearing set 2940yen ~AUD33.50

MDW003 Arragement tire rod set 630yen ~AUD7.20

MDW004 Suspension springs set x2 1890yen ~AUD21.60

MDW005-15 and MDW005-30 Knuckle set 1050yen ~AUD12.00

MDW006 64 titanium center shaft 735yen ~AUD8.50

MDW007-02 Aluminum motor holder set 1260yen ~AUD14.50

MDW008 Aluminum motor cover 2520yen ~AUD28.70

MDW009 Hard universal swing x2 3990yen ~AUD45.60

MDW010 Pinion gear set 1550yen ~AUD17.80

MDW016 cup joint (L.R) x2 1890yen ~AUD21.60

30560 Mini-Z AWD Chassis Set 15750yen ~AUD180.00

Total arround AUD395.00 not include shipping.

http://www.kyosho.co.jp/web/new_products/parts/parts00-j.html

ONEmore week to GO!

Edited by – ken_wyleung on 24 November 2005 21:25:35

[ken_wyleung]

Hi,

Welcome to the world of Mini-Z, where do you want to setup your track (indoor or outdoor)? It is very important for select the material for your track.

By the way, where are you?we also looking for some good players to play with.

[ken_wyleung]

Hi,

I cannot read Japanese and thewords arenot clean, but I think it was ‘drift driving apply’;and some optional parts will released for AWD, which is include special tires for drift (part no: MDT001 [8.5mm] and MDT002 [11mm]).

http://www.kyosho.co.jp/web/new_products/parts/parts00-j.html

By the way, it help me to translate Japanese to English, I hope it can give you some idea

http://www.infoseek.co.jp/Honyaku?pg=honyaku_top.html

日 is Japanese, 英 is English; so select 日->英

cheers

Edited by – ken_wyleung on 01 November 2005 19:57:07

[ken_wyleung]

Some information about the Kyosho Mini-Z AWD optional (Japanese only)

http://www.kyosho.co.jp/web/new_products/parts/parts00-j.html

Edited by – ken_wyleung on 29 October 2005 01:29:04

[ken_wyleung]

This is a nice indoor track, I hope someone will set up one track like this in Melbourne.

But I can not see the Mini-Z in the video is Mini-Z AWD; 1st, it is 360GTbody for MR-02 RM, it can be fit on AWD and MR-02? 2nd, in the video that Mini-Z is not drift on the track,soitcan beAWD drift or Rear Wheel Drive drift.

Can you post more video about it please?

Thank you!

Edited by – ken_wyleung on 22 October 2005 19:38:43

[ken_wyleung]

Hi All,

This is the vedio from Kyosho Japan about the AWD

http://www.kyosho.co.jp/web/download/movie/2005prshow/wm/mini-z.wmv

Enjoy!

Edited by – ken_wyleung on 13 October 2005 13:08:52

[ken_wyleung]

As I know the AWD Ready Set are 2 GTR34; andthe AWD can be fit most of the Mini-Z MR-01 RM, MR-015 RM and MR-02 RM body, because the chassis set sound like come with some offset wheels. Also we think it is AM27 too, so we can use existing TX. The only thing we have to search is the optional parts, there have some optional parts by Kyosho can be release as the sametime of AWD, but we donot have the items list and release date. I will keep eye on it. Andplease update me if you guys have anynews.

Thank you!

[ken_wyleung]

As I know,Kyosho take the per-order in Japanduing the hobby show. And I have pro-order some ‘Chassis Set’ for my friends for Japan, because we donot want the GTR34 and TX. It can be same for shipping.

Edited by – ken_wyleung on 23 September 2005 18:32:05

[ken_wyleung]

The Melbourne indoor mini track was closed. But we still do the race every Friday night in our garages (2.2m x 3m and 2.5m x 5m).

http://au.geocities.com/mrcz_miniz/

The carpet we are using which are import from Hong Kong (for Mini-Z track).

[ken_wyleung]

do you guys be have a look of Kyosho GT40? It will release on July 21, it is design for Kyosho MR-02 MM.

http://www.mini-z.jp/modules/catalog/photos/128.jpg

And I will say Kyosho Mini-Z MR-02 and MR-015 are much better than i-Waver.

If you want more details, you can check on this web-site: http://www.kyosho.co.jp.

If you want to see more latest news and information about the Mini-Z, try them:

http://www.mini-z.jp

http://www.mini-z-bar.com

http://www.minizracer.com

For the lap system, I am using Lap Wizard (http://www.squat.co.jp/rcbearing-squat/mini-z/lapwizard.htm); it is good but not the best. If you want a professional lap system, try KO-Pro (http://www.shopatron.com/index/166.0.1059.0.0.0.0); as I know, the Japan Kyosho Mini-Z and PN Mini-Z Cup are using it.

at the end, this is for you.. http://www.kyosho.co.jp/web/download/movie/2005shizuoka_hs/wmp/miniz_cm.wmv

Welcome to Mini RC!

Edited by – ken_wyleung on 14 July 2005 23:00:44

[ken_wyleung]

I was ask about the shipping for Mini-96 and this is the reply:

You can go to http://www.usps.com for rates on international orders. You can use information below to find the rate for your country. Be sure to click on the dim. button to find the max. girth ( longest length + total dimension around box) for your country. Each country has different max. girth requirements.

The Wide L would be packed in two smaller boxes. If you purchase from here we can deduct some of the shipping costs which are worked into the standard price.

Each box measures 21′ x 21′ x 18′ Qty (2)

Each box weights approx. 17lbs

Shipping from Zip 91377

Shipping usually takes 7-10 days. No tracking info available for shipments.

__________________

WE BRING THE TRACKS TO YOU!

http://www.rcptracks.com http://www.rcptrackbuilder.com

Also, my friend was thought about get two of Wide L (50cm x50cm each) track, and the RCP reply if he order 2 Wide L, he can get 20 pcs of tracks free, but still waiting for reply about the shipping cost.

By the way, you have to think about the custom, they may check it and you have to pay for the tax; if you want to post it by ship.

Good Luck All!

Edited by – ken_wyleung on 12 July 2005 19:29:02

[ken_wyleung]

Are they same thing?

http://www.rcmart.com/catalog/product_info.php?cPath=144_21_474_476&products_id=6587

If yes, it is 1.5 years old product from 3 Racing and it is design for MR-02 or MR-015 RM 94mm wheel base only, which is not fit with MM and 90mm RM chassis, beware!

[ken_wyleung]

is it GPM discontinued for3 years agoheavy metalmotor mount for MR-01? It’s look like the Dinball showing one

http://www.rcmart.com/catalog/default.php?cPath=144_21_474

[ken_wyleung]

Chassis, servo gears, servo pin, servo saver, R/C Unit, Chassis King-pin, shocks and shock springs only

Don”t think about make the overlander to monster, buy a new monster is cheaper.

Buy if you really want to make your overlander into a Monster, I can show you the parts you need.

Edited by – ken_wyleung on 02 June 2005 21:27:18

[ken_wyleung]

Sorry All,

The correct date is June 9, next Thurday.

[ken_wyleung]

http://users.bigpond.com/tony_buser/keorca/indoor.htm

which is tomorrow, June 2!

[ken_wyleung]

I had try the i-Waver X-Speed Pro before, it burn my stock Kyosho Mini-Z PCB FET. Althought I puted it on my 2×5 4562 FET Kyosho Mini-Z MR-01, it was slower than Kyosho X-Speed motor.

If you want some motor can fit on stock PCB (Mini-Z or i-Waver) with good result, I will say Kyosho X-Speed, PNStock andAtomic Stock, but not i-Waver motors.

Edited by – ken_wyleung on 29 May 2005 10:23:35

[ken_wyleung]

Thank you.

I find the web-site http://www.rcptracks.com/html/home.html

[ken_wyleung]

You can free download the English version of HG Mini-Z Manager program from KO-PRO US web-site But have to buy the ICS cable for Mini-Z.

And it is very easy to use.

[ken_wyleung]

The Kyosho track is very nice. And I have somequestion about your track, can you help me please?

1. I see you set it up in the living room, is it easy to setup andpack up? Anddoes it strong or hard?

2. What tires areyou using on this track?

3.Do you brought it from local hobbyshop or from Internet, and how much?

4. What is the size? (30mm x 30mm or 50mm x 50mm)

I was think about to buy the Kyosho Track and I will know more about them.

THANKS!

And this is my video: http://member.telpacific.com.au/ken_wyleung/Mini-Z01_0004.wmv

Edited by – ken_wyleung on 18 May 2005 13:50:35

[ken_wyleung]

Can by say, move the AD R/C unit into MR-01, MR-02 or MR-015 chassis.

But, if you order the MR-01 AD R/C unit set, its come with Servo Box as well; and it is same as MR-02 AD PCB.

Yes, the RC-Mart has stock with US$105 (RC Unit and EX-10 module).

[ken_wyleung]

quote:

Quote:

”’drool”” that is cool as… would like to find something like that up here in Sydney… ken; how would you compare the AD to the standard 02 chassis””? Been looking at them for a while wondering how they go…

http://www.kopropo.co.jp/html/forMinitz4.html

AD Band Mini-Z Stock (R/C Unit / PCB with Module)

FM25

ICS -PC

4 x 3010 FET

HRS (EX-1 Mars-R or EX-10)

Digital Servo

Standard Mini-Z Stock (Ready Set /R/C Unit /Chassis Set)

AM27

2 x 3004 FET

HRS (EX-1 Mars-R or EX-10)

The PCB is new design (Blue in color). ICS – PC (Mini-Z HG Manager) can make the Mini-Z totally difference; its likes the KO-PRO 1:10Digital ServoandESC with ICS. And FM is much better than AM.

[ken_wyleung]

This is really good for X-mod, I will take my X-mod too.

Hope to see you there

[Author]

Posts