PandaBear

Forum Replies Created

Viewing 25 posts - 726 through 750 (of 1,745 total)
  • Author
    Posts
  • in reply to: Site Relocation Update #37164
    PandaBear
    Participant
    • Posts: 1866

    Was that it??? :p:p:p

    in reply to: does it fit? #49461
    PandaBear
    Participant
    • Posts: 1866

    Yea, I’ll side with dgs there – definitely far from ‘nasty’.

    If you can find a PR for less than the Kyosho bodyset, that’s a good bargain.

    I think the radiogear would be a lot beefier than the electronics in a BCG, and would definitely have much better signal range for when you want to build a hangar rat plane. :smiley2:

    in reply to: does it fit? #49412
    PandaBear
    Participant
    • Posts: 1866

    What’s your actual Q…? :question:

    MiniX is a 4WD car with suspension, centre motor
    and its meant to use lexan bodyshells.

    It would be hard to put miniZ shells on that
    without some serious surgery.

    in reply to: mini z xrastals #49406
    PandaBear
    Participant
    • Posts: 1866

    27Mhz AM xtals are available from any Hobby Shop.

    You can only use 27Mhz in a Kyosho Readyset.

    You might want to take your miniZ to the shop
    when you’re buying it; some brands are longer
    than the Kyosho ones and could stick too far
    out at the bottom of the car.

    in reply to: stadium buggy/truck #37420
    PandaBear
    Participant
    • Posts: 1866

    Might as well go for something bigger? Unless you’re determined to cause yourself some headaches.

    in reply to: Attempting to SMASH through the 75km/h barrier!!!! #49362
    PandaBear
    Participant
    • Posts: 1866

    I hope we’re talking real life (not scale) performance on an actual straight road, and not just on a dinky MiniYon speedchecker… :blush:

    in reply to: A new clear coat I found #49361
    PandaBear
    Participant
    • Posts: 1866

    Is that the Mr Color range?

    I’ve got their Gloss Clear with sparklies, nice.
    The Clear also comes in matte & various colours too.
    Nice range of paint, but hard to find outside Japan.

    in reply to: Man, think of something original #37474
    PandaBear
    Participant
    • Posts: 1866

    Skyline History Set is to be re-released, huh?

    When’s the Initial-D one coming out in SBCG, I wonder.

    in reply to: HAPPY NEW YEAR, y’all! #37483
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    …speaking of drinking, ive said id nver drink again, that was BEFORE i turned 18.

    Was drinking… AND driving… all Legally… before I was 18.

    Gee whiz, scary. :dead::dead:

    in reply to: HAPPY NEW YEAR, y’all! #37535
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    so what’s the next big thing on the asian calender?:8ball:

    Feb 9th, 2005 = next CNY. :D:D

    in reply to: Initial D city #37703
    PandaBear
    Participant
    • Posts: 1866

    Oh oh oh… big Q here. 🙂

    What comes after 3rd stage The Movie, is it

    – Extra Stage

    or

    – Battle Stage

    ???

    in reply to: does anyone know? #37702
    PandaBear
    Participant
    • Posts: 1866

    They’re still there… what’s listed on the site is just the stuff they have in stock – you don’t see items listed as “out of stock” or “arriving soon”.

    Does look a little lower than normal though. Probably they had some extra stuff in for xmas when you last checked?

    in reply to: Initial D city #37731
    PandaBear
    Participant
    • Posts: 1866

    I’m told Akina is a real place… hmmm, local residents must rue the day Initial-D came out.

    in reply to: HAPPY NEW YEAR, y’all! #37784
    PandaBear
    Participant
    • Posts: 1866

    Could also be Footscray or Richmond, haha.

    in reply to: Initial D city #37876
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    lol Panda, you have really put some thought into this:)

    can’t stop thinkin’… :p

    Quote:
    Here is a link I think might help you out for location at least. And yes lakes can be near the top of mountains:shock:.

    Yeah, that makes sense. The lake seems to be a scenic sight where
    they go for dating (eg Tak’s 1st day out with Mogi) so that’s where
    the tourists & restaurants would be too. 😀

    Quote:
    About the tofu? I do know that he has a glass of water that he usually starts and finishes with with the purpose of not spilling any

    “Swirl the water” haha, yup.
    Guess he tosses it out the window with the tofu at top! 👿

    Quote:
    (wish I could drive that smooth;)

    Just takes practice. Smooth is always good as your tyres will have
    more Stiction than friction… stiction is the grip you have
    when tires aren’t sliding on the surface. Once you get them sliding
    they produce less grip than before – eg its easier to
    continue a powerslide then it is to start it.
    (“Break traction” == overcoming stiction)

    in reply to: Initial D city #37942
    PandaBear
    Participant
    • Posts: 1866

    Questions questions questions… 🙂

    1) is the tofu shop at the top of the hill or at the bottom? (I say bottom…?)

    2) that would make Akina Lake… at the Top of the hill?

    Confused here… as methink
    a) he’s not meant to destroy the tofu… going Up?
    b) and he can go as fast as he likes… downhill?
    c) are lakes often at the top of mountains?

    in reply to: Getting started in 1/10.. #49239
    PandaBear
    Participant
    • Posts: 1866

    James:-

    Used to be, if its Sanyo cells then
    SC = “standard charge” and comes in yellow wrap,
    SCR = fast charge (5 hrs) in red wrapping then
    SCRC (black)for the RC fast discharge ones
    which later became just ‘RC’ as in RC2000.

    But with the Model Engines packs, not sure who
    even supplies the cells so its impossible to tell.
    Could be just some generic stuff from China or
    Mexico, anybody’s guess.

    in reply to: Christmas presents #37991
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    Hey Hey, four gold stars

    Santa must’ve brought me Five… :D:evil:

    The bro got me a Ferrari set, that was nice!!

    in reply to: Getting started in 1/10.. #49190
    PandaBear
    Participant
    • Posts: 1866

    Don’t fret, that ‘Stadium’ (previously aka Arlec 167) with the AC/DC is one damned good machine!! We call it “The BRICK”, no guesses why.

    That huge heavy transformer inside is fully capable of the load – others with tiny transformers often fail. It does its job without fuss, its totally reliable, charges at 3A whether from 240V or 12V… when it was Arlec used to be like $65 and even then it was good buying. These days you can often find ‘Stadium’ for ~$30…!! 😯

    We usually have at least 1 on the workbench… sometimes, when rushing to get to the track, we’ll grab a powerboard + up to 4 Bricks to juice up multiple batteries. :smiley2:

    in reply to: Hardest color paint to work with #38059
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    …What is the hardest color paint to work with when painting a car/model etc…

    CHROME!!!

    :smiley16::smiley16:

    in reply to: Getting started in 1/10.. #49163
    PandaBear
    Participant
    • Posts: 1866

    Your $$, your choice.

    Any foreign AC device, just make sure it runs on 240V; if its 110V its useless.

    in reply to: Getting started in 1/10.. #49152
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    how much for a batt 7.2v plus a wall charger? and where?

    Most of the “wall chargers” plugpacks take Overnight to
    charge your batt, who can wait that long?

    If you must have something that runs off 240V, there’s an excellent
    unit from Stadium/Arlec that’s the size of a housebrick, it takes
    240V as well as 12V DC (car battery). Most reliable unit, amazing
    value at ~A$30 these days… look for it at LHS or even DSE!
    (nb. it does nicad only, no NiMH)

    Battery pack… you get what you pay for.

    Buy something decent, say A$40/pack minimum otherwise you’ll buy
    twice. Whatever the brand of the batterypack, ask what cells are
    in it… ‘Sanyo’ is best, ‘Panasonic’ ok too.

    Do not get NiMH unless your charger can handle them.
    For general use, the high capacities (3000, 3300) aren’t
    as vital as when you are racing so the extra hassles of NiMH
    isn’t worth bothering with.

    Nicads come in up to 2400mAh; usually the 1700s & 1900s are
    the best value for $$.

    in reply to: Happy new year!!!! #38137
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    heppy new year fellas! pretty fughen pissed at the m o and not pmaking much sense at all!

    That WOULD explain all the chukkas every 5 feet (*not* joking!)
    on Melb’s pavement this morning… :dead:

    Made interesting walk to work.

    Still managed to trip over a JB bottle, twisted ankle… d’oh!

    in reply to: Looks like we are back on line again….. #38157
    PandaBear
    Participant
    • Posts: 1866
    Quote:
    for a second i thought we’d been hacked again…

    Yes that did cross my mind too.. :p

    in reply to: Who s getting What for Xmas?? #49097
    PandaBear
    Participant
    • Posts: 1866

    Ahh… keep one’s Expectations *low*… and you’ll never be disappointed! :smiley2:

Viewing 25 posts - 726 through 750 (of 1,745 total)