PandaBear
Forum Replies Created
-
AuthorPosts
-
Ya, you can get the same size batteries (I think they’re just “4/5 AA”) quite easily, but I don’t know if Orion & co actually do any “matching” of the cells.
Then again, I don’t really care, doesn’t make much difference for my use. A 6-cell AA side-by-side fits quite well right across the chassis; it might be too fat for some bodies though. I need 7.2V as some ESCs can refuse to work off 4-cells 4.8V.
Quote:Originally posted by z-beam on 24October2002the cog had loosened on the axle so if u hold the car down the axle spins but not the wheels
Like, you mean the SPUR GEAR came loose and is spinning on the axle – thus the wheels don’t move, ‘cos the axle won’t be moving either.
Or else your wheels will just fall off…?
Yup, its tight.
When putting the heatsink on, don’t just push *down* – try to push the tab ‘in/fwd’ too at the same time. When taking it off, push the tab ‘in & up’ too.
That bit is also part of the rear bodymount, so it can be cracked too if you have a rear impact or fall off the table landing butt-first.
Quote:Originally posted by KittyKatSmack on 24October2002Pussy Kat Pizza?
Yay – someone’s back.
Boo – don’t YOU start it all over again!! :smiley13:
KittyKatSmack… = CATNIP, right?
Quote:Originally posted by Shypo on 23October2002and to answer Pandbears Q about BBq meat lovers from pizza hut, i think everybody would be happy if i ddint tell what was in them.
You referring to the “pepperoni”, right? :smiley3:
Already one step ahead of you.
Yeah, Phar Lap had it easy.
Quote:Originally posted by Chris_Flowers on 23October2002That’d be cool, but somebody once told me that planes would be a no-go becasue of the parts and physics involved.
Yup, that’s too true – you just can’t muck about with Newton.
Planes need to be as big as possible to fly well; I remember RC trainers with huge 8-10′ wingspan… these were super stable and flew extremely slow (walking pace!) too – they just about flew themselves.
Tiny planes will be too strongly affected by crosswinds etc. Anything less than 1′ wingspan would be totally uncontrollable, even a human’s breathing would affect it.
Then again… what about a helium-filled Bit-Hindenberg?? :smiley1:
Quote:Originally posted by xtreme_microRS4 on 23October2002…I can easily add another cell to my 5 cells.
Nah, better to just build yourself another pack!!
Use AAAs if you can, they’re much lighter. Unless you’ve got access to the flat Sanyo cells (as used in Sony Walkman), which makes neater packing.
AAs have better capacity but they’re pretty heavy and I’d guess you guys don’t run for 30 mins flat?
hint:- The DigiQ tanks are sold under “Konami” name, not Takara… :smiley10:
Quote:Originally posted by xtreme_microRS4 on 23October2002i’v changed my mind, im not gettin one yet, im gonna spend the money on my micro, im getting the hpi mod motor and ally front driveshafts on thursday. We have started racing micro’s at one of my local r/c clubs, I race 1/10 and mardave and micro now:D
Sounds like a good choice!
Yeah, don’t need too many options on the mRS4 but I’ve got HPI’s big round motor lined up as well as purple unis with wheel nuts for the front. Already got the NiMH AA 6-cell pack joined up. Now if only I had time to go paint the body maybe we might even get it running… built it in 3 days but been untouched like that since xmas, wow nearly 1 yr past. :smiley3:
Sorry to burst your bubble ‘drew, but yes we’ve got the schematics.
Cripple cap is not featured on the specs. Its an add-on soldered right between the aeriel’s signal path and ground, so it appears its only use is to limit the transmission signal’s strength.
Part appears to be an afterthought on the earlier TXes, but on the latest lot of Boost controllers its probably designed in already. No add-ons seen there.
Well I wouldn’t say its impossible, but just more pain-in-butt than its worth doing.
Quote:Originally posted by snakeman65 on 22October2002Hi, I can’t find the thread saying what to replace anywhere!I have resoldered all of the components on the controller with no difference at all 🙁
There is nothing in the charging circuit that can ‘die’ just like that. (This is a genuine BCG, right?)
If there was anything that could be suspect, try changing the 2 transistors maybe.
Make sure also you haven’t broken the wires to the side terminals. Its too easy to do, I mucked mine up accidentally too and had to go dig out the solder iron.
Quote:Originally posted by GTR-34 on 14October20021969 CAMARO SS
Z28?
“Bentley” :smiley9: — like this?
uhoh… maybe BCG is getting discontinued… the craze is over, fellas! :smiley4:
Quote:Originally posted by jamiekulhanek on 22October2002but the rs4 is cooler, cause a mini z is like a giant bit, wheras a rs4 is like a 1/10 scale car
Gotcha! Yup, no need to stick with Kyosho’s custom electrics, can just use fullsize standard stuff. I just have a Futaba standard servo for my mRS4’s steering.
oh sh*te…
:smiley5:
Ya – *never* run without a body, that’s what its there for.
I have never (touch wood) managed to damage anything too badly on the 03 before, even after some pretty spectacular aerials. Have only replaced parts due to wear – eg suspension arms got too floppy.
Ok ok also have an 03R front bumper just about falling off (wife’s fault, she was driving) but still waiting for it to fall off first, there’s still a bit of lift left. :smiley9:
like I said earlier…
Hey… where’s our galpal Kitty lately ???ok, fess up… WHO ATE HER??? :smiley15:
Then I suppose you guys who are old enough to DRIVE will probably not wanna look at this one…
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=1775357760
An ex had a shepherd dog (I swear its crossed with great dane!!) so big, it once swallowed her 15″ Snoopy doll in 1 gulp.
I think it’ll have little problem with a MiniZ even.. :smiley3:
Quote:Originally posted by Chris_Flowers on 22October2002Hello Acasonj, your new here aren’t you, lol!
Must be, seems like a real friendly type. :smiley8:
You wouldn’t buy an “HPX MiCroR” would you…?
Less risk with buying the ‘real thing’.
Quote:Originally posted by Shypo on 22October2002
dont tell me that about twisties man, i like them. i dont want another food ruined,
Haha, a friend (?) once showed me a video of the Twisties machine extruding those shapes… its pretty disgusting. But heck, we love them for the taste, right??
Red CHEESE only for me thanks, I don’t trust “chicken”. :smiley1:
Quote:Originally posted by Shypo on 22October2002
just like pizzahut (NEVER EVER EAT BARBEQUE MEAT LOVERS MEAT BALL)
Why, what happened here? I love BBQ Meat Lovers at PizzaHut… although I swear their standards have droppedover the last 10+ yrs.
My local PH served me up a bug (one of those ~1.5cm brown beetlely crawly types) half-embedded in the crust a few years ago. I think I still got the evidence stuck at the back of my freezer.
Didn’t go back to any PH too often after that.
Ugh, I just muched a pkt of Smiths “Chicken”… I sure dunno WHAT they tasted like, :smiley13:but it didn’t taste good at all. Just S&V or Original for me the next time.
Quote:Originally posted by jamiekulhanek on 22October2002Though i have seen documentaries on dog-eating, they believe the more an animal is tortured the tastier it is…
Saw the same – No, that’s not the chinese, that’s the Koreans. Like, in Seoul where I think they heldsome Games meet recently.
Yeah, they seem to like their food mashed and battered… :smiley11:, no I don’t like kimchee.
-
AuthorPosts