spanky
Forum Replies Created
-
AuthorPosts
-
scan any yet?
its time to clean out the closet. I have several of these bodys ready, 5 dollars a piece shipping included. e-mail me for more info.
my website is currently in the slurry of hell with the comcast/AT&T crossover. my new emailaddress is custombitbodys@comcast.net
i should have my website up in a day or two…:evil:
i just got a bicycle computer that allows me to enter in the circumference of the wheel. im not sure if they are all like this… but this would allow for the most precise calculations. by knowing the circumference of the wheel that has the magnet, and also figuring the circumference of the bit wheel.. you can calculate the auctual speed/rpm.
that would be me and my little blonde friend….:D
why not wait a few more weeks till microsizer releases the sub-channel cars… i.e. two frequencys, 27 and 49, each with 3 sub channels.. so you get 3 cars on 27 and 3 cars on 49 racing all at the same time… this way you get good quality crap… heheheblackeye:
i want to see them!!!
yea we have had them in the states now for a while. the bodys on general are quite wide. but if you do the wheel mod correctly then you might be able to overcome this obsticale. the bodys are very heavy.. but if you can get a dual cell of possibly a tri cell under it. it might not do so bad. just dont expect any wheelies…
tuners i have
focus
supra
civic…find someone with a lathe. fill the hole with jb weld. and stick that tiny drill bit on the end chuck and bammm… your done.
if you dont have a lathe. jb weld the end of the axle.. just a bit.. then stick it in a dremel tool. (you need the chuck) then just turn on and sand to correct diameter.
if you dont have either. the above ideas sound good.
purple windows are from a purple ms sport car. he probably just left them as is.. it looks awesome.
i got a bunch of the ones that i took developed at target. and got them put on kodak cd for 10 dollars… it was a 27exp camera… that may be the easyiest way for you to go…save you a lot of time…
yea which site did you order from to get that astronomical pricing…
yes i have found one that will even give power output as an option…
go to http://www.polarusa.com
http://www.polarusa.com/Products/Consumer/S720.asp
http://www.polarusa.com/Products/Consumer/S150.asplook at the S720i. that one has everything.. but at a 320.99 price…. thats kidna steep. the S150 also does speed and distance and is only i think 150. but im sure you can find these cheaper at retail stores.
i own a S410, which is designed for runners. the uplink can be a pain in the but if you dont have the infared option. but it works pretty good. i am very happy with the uploads and the info i get from this thing…
you can also buy just the spring from http://www.rcmod.com for 2.50 and i think another 2.00 for shipping.. and you will have it in a couple days… they ship fast..
you can also buy just the spring from http://www.rcmod.com for 2.50 and i think another 2.00 for shipping.. and you will have it in a couple days… they ship fast..
well im sure there are already some bike computers that link to your pc. i have a HRM that links to the pc. so i couldnt imagine why they wouldnt make a bike comp that does the same. basically you do your workout.. or in this case. your dyno run. and the comp stores it all.. then you link up with your pc and dl it all.. the software that comes with it should be able to do allyour graphing that you need…
only catch is cost.. it could cost 100+ for a bike comp that will link to pc…
yea i just saw. i went through the post again. and there was no definate price… just a “somewhere around 15.00” so i posted and he did affirm the 15.00.
the source that ive listed is great for all of us that missed the group buy, and dont want to wait for him to do another group buy… he said he woudl have some extras.. but who wants leftovers… if im gonna spend the money i better get the ones i want.:smiley2:
anywho… imouta there
yea we want pics…. at least i know i do…
i am waware of the group buy.. however i was checking this board. and no info here either.
several weeks is the key thing.. this guy does have some in stock right now. i have been watching the bitpimps forum also and have even put in my order also.. but i have a feeling it may be at least 6 or more weeks before anything materializes there. there is also no idea on pricing, or at least i havent seen what they will be costing. is this the same guy thats doing the group buy in bitpimps?
well im on fiber…:D:D:D. seems fine to me!! but i do connect through my cell on ocassion when in the field at work… some pages do take forever…
bravo Aaron. i could stare at this screen all day long!!!:) i still get one email for every post. i wish i would only get one email till i checked the post. after a couple days of not beign at my computer i can have 3-40 emails all for 3 posts. but that wont slow me down:smiley16::smiley16:
http://turb00.home.attbi.com/DSCF0049.AVI
http://turb00.home.attbi.com/DSCF0050.AVI
second one is not working yeta couple more videos..one more video…Edited by – spanky on 19 May 2003 05:40:19
yea those are 2wd cars. they dont achieve the same speeds as the awd cars do. also like i said it depends on the rally. some rallys have straighter roads which allow for faster speeds… you also have to realize that your dad was racing over 10 years ago. there have been alot of advancments since then, which allow cars to go much faster.. i have no doubt what your saying for speeds is right on.. but i can attest for speeds in the past few years. i have been working timing on these things all my life. cars are much faster now than they were in years past. from what i understand the biggest advances have been made with the tires.
now some stages do have average speeds of 40-50 just due to the amt of corners.. and sometimes weather even limits the speeds to 30+mph…
o well
the fact that it was a school still shouldnt matter… there is still a school but those people shouldnt have been where they were.. anyway. true on the speeds, different stages will post different times. most club cars do go around 40+ prolevel racers are averaging speeds in the upper 70’s depending on the stage. the Ramada Cup Rally has average speeds of 120+ (pro class). cpeeds are pretty much dependent on class and type of rally. club rallys dont approach the speeds of prorallys.
no i havent seen the astro van. but we used to have a plymouth voyager that we would push to the limits.. sideways around corners and stuff… My father used to race also and he showed us a few things. he raced an old audi gt. not the AWD car.
the red wrx is shown in the expo pics.. it wasnt a rally car. more of a drag/street car. its a world record holding wrx…
no that dosent explain it. the driver and co-driver were expeirenced rallyers.. and the people that got killed were also experienced rallyers…
I have never heard of a school that operates durring a prorally. the school may be putting it on. but in order to race it you have to meet all specifications just like any other rally. Being this was a club rally, there were probably many newcomers. Also you usually never see club rallyists reach the speeds of the prorallyers. there is a reason for closing these roads down… and not allowing spectators into certain areas.. the people that died were auctually part of another race team hoping to see some cars… apparently the car lost control (which happens all the time… even with the pros)
holy shnikes.. thats expensive.. i pay about 12 dollars for a quart. (regularly 18.99 for a quart,but the store puts out a 40% of any item every week..) i dont use the alumlite resin though. i use castin-craft clear plastic. (its a polyester resin).
i plan on switchin to this stuff when i run out of my current suply of resin..
http://www.tapplastics.com/fiberglass/molding_casting/96_clearlite.html.
im not sure if this is something that i can ship to you because of postal regulations.. but you might want to contact them. for the same price you can get a gallon of this stuff.. although im not sure what shipping would be.. i will check to see if this is something that can be shipped… and how much it would cost.
Custom bodys: Ferari 250 GTO, 69 doge charger, Micro Cooper, Beemer 320i Turbo, Baha Beatle, New Beatle Rsi Porche 911
email: custombitbodys@attbi.com
website: http://custombitbodys.home.attbi.com -
AuthorPosts
