Admin

[Admin]

I’m down south in sylvania – I too will go anywhere.

NV

[Admin]

Hello,

This is my first post,

I registered just so I could reply!!

Sydney Australia

I try to get back and look when I can, I guess it evens out at a couple of times a week ;o)

I like to view tinyrc.com forums too

got my first bit at easter, although I bought two and they are both clones. I’m glad I have read forums inside out. I was going to buy a 2.6 motor for them but I have bensu clones and they apperently have 2.6 motors in them already I’ll have to go 3.8 now ;o)

does anyone know the max voltage a pcb board can take? without frying anything? if not do you know a simple experiment to find this out what it is without frying anything?

Don’t get mad, get even ;O)

[Admin]

check out http://www.plantraco.com

NV

[Admin]

I’ll go anywhere in the Sydney area to race.:D

NV

[Admin]

thanks spanky:smiley2: that helped alot, appreciate it, i think the only trouble for me is tacking the chasi apart.

[Admin]

im back from a bit of shoppong, well not really i just happened to come accross some kit racers that were marked down from $24.95 to $18 and i also got me some afx springs for suspension. i decided to give my R34 a new paint job,i put in the new 2.6 motor from the kit racer but still cant figure out how to instal the springs? need some help, dont want to break anything!

thanks:)

Edited by – froggy on 30 April 2003 23:23:48

[Admin]

sorry guy for confusing writting style,im just used to it i guess. but thanks for the help anyway z-beam! the information realy helped, im going to check out some of those places tomorrow.

i think the problem with perth is that we dont get alot variety from what we can choose from and the fact that we have a lack of stores that i know of that actually supply bit equipment.

thanks again for the help, froggy.:)

[Admin]

thanks, i guess i need a soldering iron to replace it??

Help me Obi Wan Kenobi, you’re my only hope!

[Admin]

thanks, i guess i need a soldering iron to replace it??

Help me Obi Wan Kenobi, you’re my only hope!

[Admin]

thanks 4 everything guys!!!

appreciate the help, oh and thanks 4 the friendly welcome, be seeing ya all soon

:D:D:D

[Admin]

Very nice, truely impressive!

Help me Obi Wan Kenobi, you’re my only hope!

[Admin]

Stop looking everyone, I think I have found the problem, it’s inside the controler not the car! Phew!, anyway I’ll open the controller and have a look, if anyone has any tips in regards to controllers please let me know.

Help me Obi Wan Kenobi, you’re my only hope!

[Admin]

Stop looking everyone, I think I have found the problem, it’s inside the controler not the car! Phew!, anyway I’ll open the controller and have a look, if anyone has any tips in regards to controllers please let me know.

Help me Obi Wan Kenobi, you’re my only hope!

[Admin]

Yeah, I had a look and both the copper wires and the black power wires to the magnets seem to be attached at both ends. However as I said before I am sum what blind. I don’t know what to do. Someone please help.

Help me Obi Wan Kenobi, you’re my only hope!

[Admin]

Yeah, I had a look and both the copper wires and the black power wires to the magnets seem to be attached at both ends. However as I said before I am sum what blind. I don’t know what to do. Someone please help.

Help me Obi Wan Kenobi, you’re my only hope!

[Admin]

Tall Dude, The chassis is exactly the same length as any other bit. I could fit the modellista supra body on it, but the tan coloured wheels look really bad with it lol. I think they have more ground clearance than other bits though. That Bensu Truck looks awesome, might have to buy it!

…JoSh
Drive it like you stole it’

[Admin]

Where else? Trading Direct

…JoSh
Drive it like you stole it’

[Admin]

I don t know why they wouldn’t be selling alright, i have to admit they are sweet cars. I mean, they have the quickest acceleration out of any stock char-g’s I know (Quicker than a Lxx Char-g Modellista) and the top speed is not that far off the Lxx. Also, your hard pressed getting them out of range because my bro could control mine (unfortunately we have the same frequency) from the other side of the house. Their charging times are different from other Char-g’s, it takes just on 2 minutes to charge but then it runs for at least 15 – 20 minutes. I kid you not. The body detail is well done – including jerry cans, high gloss paint and a roof mounted turret or spare tyre, depending on the model. On some of the models you even get an extra body shell, and on all of them you get a spare tyre set. Lol well theres basically a mini review from me (i’m sorry, i couldnt help it) but i do reccommend at least considering these if you already haven’t. Although their advertising campaign is most likely rigged they’re a decent car and i’m really impressed at what i got for my $40.

‘Drive it like you stole it’

Edited by – Good Fella on 17 April 2003 08:51:37

[Admin]

thanks bud

[Admin]

yeah this sucks we do have to import them. no tomy’s for us just microsizers. the american tomy’s but tomy makes microsizers so yeah.

27mhz
lancer oh yeah
same one as the one on the title
red to 😀

[Admin]

Is Dave on now does anyone know???

[Admin]

You got any pics or vids of it?

“UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity.”
Dennis Ritchie.

[Admin]

So say for example if i was to buy the Bit Char-g gear parts set I could get 3.8 motor for half price?

“UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity.”
Dennis Ritchie.

[Admin]

jamie say something else for a change. i bet my car can beat your car:D

[Admin]

Hey can i get a better pic of that BB in the back? I LOVE THAT PAINTJOB AND TRAILER!!! I’ve been wanting to paint mine like that but can’t get it right…

[Author]

Posts