jamiekulhanek
Forum Replies Created
-
AuthorPosts
-
When does that funky controller from iwaver with the LCD screen that looks identical to a futaba 3PM come out?
I wish our managers would join in our games at work 🙁
A mate who works at KFC said something about the gravy being made from all the crap that comes from the deep fryers when they are cleaned….
Dude the pickle thing is so old, being a silly dickhead doesnt get you anywhere…i’ve learnt that the hard way.
Quote:I heard that disgruntled staff spit in the burgers, pelt each other with frozen buns in the cool room and blow in the softserve or are they macca myths ?Where i work its a tad stricter than that….but throwing stuff at each other is still common when the manager is elsewhere. Ive never spat, and never seen anyone spit in a burger, its just too risky.
Last week i put a dirty big moth in the softserve machine, imagine sucking that up a straw :p
Oh and if you get custom burgers, you’ll 99% of the friendly smiling staff actually want to kill you…custom grill orders are a real hassle…
That 2 lb burger ended up costing him somewhere in the region of $16…
If you ask me i think 1:10, 1:18 and 1:28 are all just as expensive as each other…
1:8 and beyond makes my wallet cry, a race setup 1:8 buggy can cost $2000…
Fries + Softserve? Eh you kidding right?
A while back ( I work at maccas) a mate (who also works at maccas) came in and asked for a quaterpounder….with 8 meat patties and 10 slices of cheese :evil:, or…a doublepounder.
The fat that was dribbling out of it had to be seen to be believed…
oh and kitsune, with the brushes dont make them taller or you will run into problems like short circuiting, make them much wider instead.
Errr kitsune wtf?
All you need to do is buy a pair of motor bearings and install them in a plasma can…simple.
And also, the other benefit of the plasma dash commutator is that it’s 2mm in diameter bigger than a stock type, which means it can handle much more current than a crappy normal one.
Neos are both loved and hated, they drop 25% off the motor RPM but give a huge torque boost.
If you do away with the 2 & 3 alloy gears and replace them with delrin ones it should take away some play, also check the play between the alloy tie rod and 1st servo gear.
Wow a full alloy steering setup, be careful with that, just ask betty.k, it’s not quite as indestructable as he though :p.
That wing is AWESOME, great work!
If you want obscene power and speeds of over 60km/h, visit http://www.woahnelly.com, and then you can pretty much use any motor you want, safely.
yeah you are right aaron, though the xmods are built pretty tough…
Quote:Quote:Man what are you on about, the Mini T is like a big Mini Z, i.e. all integrated radio gear….you know what that means?? If you want to get more power you need to change the esc, and since it’s all integrated, you gotta replace ALL the radio gear…The associated RC18T costs approx $220 AUD shipped from the states…
i know this…. the fact is you dont have to upgrade the radio system unless you are going to put some silly motor in it. they go plenty fast enough with the 7.2 batt and stock motor, can go the mod one if you raely want to go a bit faster.
not got the pvc wheels yet roe…
and no alloy for the mini giant either…but will be looking for a allot centre gearbox when i do miniking, hey i might bring the nitro tourer on sunday if it wants to co-opperate…if you know what i mean:D
BIG DAVE
True, but often if you increase speed you might want a faster servo…
Welcome to ausmicro.com priest!
Thats a very nice GT-R dude!
BUT, what you running under there? If you want performance mods, you have come to the right forum.
Quote:Quote:The problem is, mini king, that the evolution process of a mini T is so horrendously expensive compared to any other 1/18.I.E. want to upgrade motor power in a mini T?
You will need:
-New Motor $50
-New ESC $80+
-New Receiver $50
-New Servo $50
-New battery pack $40-$60
-Bearings $30
-Oil shocks* $50
-Tyres* $30Wow, theres almost $400 blown for a bit more speed……
*Non essential but you are silly not to use them.
The RC18T, for more speed you will need:
-New motor $50
-New ESC $80
-Tyres $30$160 for a little speed machine….that’s more like it.
The rest is all included in the RTR package…
man what are you on about… all you need for the mini-t is the 7.2 batt…bearings if you want…whats this servo, reciever ans speedy…they are all good in the car already. what planet are you from dude???????:dead:
Man what are you on about, the Mini T is like a big Mini Z, i.e. all integrated radio gear….you know what that means?? If you want to get more power you need to change the esc, and since it’s all integrated, you gotta replace ALL the radio gear…
The associated RC18T costs approx $220 AUD shipped from the states…
The problem is, mini king, that the evolution process of a mini T is so horrendously expensive compared to any other 1/18.
I.E. want to upgrade motor power in a mini T?
You will need:
-New Motor $50
-New ESC $80+
-New Receiver $50
-New Servo $50
-New battery pack $40-$60
-Bearings $30
-Oil shocks* $50
-Tyres* $30Wow, theres almost $400 blown for a bit more speed……
*Non essential but you are silly not to use them.
The RC18T, for more speed you will need:
-New motor $50
-New ESC $80
-Tyres $30$160 for a little speed machine….that’s more like it.
The rest is all included in the RTR package…
Dave, if you get the mini T i will slap you, the mini T is a good chassis but the rest…just don’t ask, they ruined a good chassis IMO.
The RC18T has so many things included, that will cost hundreds extra in aftermarket parts if you get the mini T.
Oil shocks, proper radio gear, ball bearings, just to name a few.
Personally i’m more interested in the Half8…
Hmmm boronia sucks…
Don’t even thing about running a Z there, you will be disappointed, it’s even bumpy for a 1/10 car, a Z or X would hate it.
Quote:hey jamie dont know where you seen the revo but can get it in sydney for under $1100If you buy from the USA you can get change from $600…
Everybody stop being so mean to the monkey, how would you like it if i said you looked like george dubbya?? :8ball::p
Edited by – jamiekulhanek on 16 November 2004 13:06:02
Well.. thank your lucky starts!! (and spank me for being wrong)
First he’s viscious, then he’s smiling, then he’s yawning….make up yer bloody mind!!
Quote:im not to sure about a 4wd mustang!?:smiley2:They are 2wd…
Quote:Yes please,http://www.toyeast.com/v2/proddetail2.asp?pdtid=AC4005 -super perfection 4.2 motor X 3
http://www.toyeast.com/v2/proddetail2.asp?pdtid=AC2646 -perfection black heat sink X 2
http://www.toyeast.com/v2/proddetail2.asp?pdtid=ACM10031 -white headlights X 1
that is all, I’m in the states, FYI
Edited by – Username on 15 November 2004 16:37:01
Username, this order is for Australian residents (Bruces).
-
AuthorPosts
