jamiekulhanek

Forum Replies Created

Viewing 25 posts - 201 through 225 (of 2,484 total)
  • Author
    Posts
  • in reply to: VIRTUAL RC!!!! out now! #23980
    jamiekulhanek
    Participant
    • Posts: 2563

    man i had no luck with a). successfully registering with that website, and b). Successfully downloading that software SPEWIN.

    in reply to: …..My New Toy…..!!!!!!!! #57412
    jamiekulhanek
    Participant
    • Posts: 2563

    Why can’t u use the ball diff? a ball diff should make a good improvement in offroad traction…

    in reply to: The 10 Commandments of R/C #23982
    jamiekulhanek
    Participant
    • Posts: 2563

    Heres another quote i found:

    You know you are truly obsessed with R/C when you can say “My balls feel gritty” without cracking a grin”…

    Edited by – jamiekulhanek on 07 December 2004 23:08:08

    in reply to: different servo #57376
    jamiekulhanek
    Participant
    • Posts: 2563

    what merc-blue said, wire up the new servo pot and motor the same as the original servo.

    in reply to: ToyEast Group Buy! #24023
    jamiekulhanek
    Participant
    • Posts: 2563

    Aaron i’m all paid up, now ive got just enough to buy a birthday present for ma, then i’m stuffed for the week 😀

    in reply to: Happy Birthday Merc Blue! #24020
    jamiekulhanek
    Participant
    • Posts: 2563

    student_.jpg

    Happy B-Day mate…

    in reply to: best differential award #24082
    jamiekulhanek
    Participant
    • Posts: 2563

    I myself had the topcad diff, it was awful to begin with, very gritty and inconsistent, but after some fiddling it was consistent….but still felt like there was a beach tucked inside somewhere…I added alot of go fast bits and the diff “broke in” and was as smooth as a baby’s ass…

    in reply to: ToyEast Group Buy! #24078
    jamiekulhanek
    Participant
    • Posts: 2563

    GOD DAMN ARMY, i still havent been paid yet, i’ve got 3 different bills to pay and buy a birthday present for my ma.

    in reply to: new years eve 2004-2005 #24135
    jamiekulhanek
    Participant
    • Posts: 2563

    No idea anymore!

    in reply to: Metl-Tech Racers Review #24149
    jamiekulhanek
    Participant
    • Posts: 2563

    teambonzer, how do they drive/handle, and how fast are they?

    in reply to: 1420 calorie BURGER!! (ya, EACH!) #24156
    jamiekulhanek
    Participant
    • Posts: 2563

    HAHAHAHAHA LOL at TD! well it’s good that it all worked out well bithed….and they all lived happily everafter…THE END

    in reply to: IRF7317 FETs – equal to SI4562DY #57329
    jamiekulhanek
    Participant
    • Posts: 2563

    I’ll take 12 😀

    in reply to: …COMING SOON… #57327
    jamiekulhanek
    Participant
    • Posts: 2563

    you Mean MIP CVD’s?

    (Moore’s Ideal Products Constant Velocity Driveshaft)
    🙂

    in reply to: ToyEast Group Buy! #24172
    jamiekulhanek
    Participant
    • Posts: 2563

    Aaron i await final prices and your bank details…:)

    in reply to: 1420 calorie BURGER!! (ya, EACH!) #24202
    jamiekulhanek
    Participant
    • Posts: 2563

    tell me it wasn’t you bill…

    in reply to: ToyEast Group Buy! #24204
    jamiekulhanek
    Participant
    • Posts: 2563

    1 x IWAVER LED TRANSMITTER
    http://www.toyeast.com/v2/proddetail2.asp?pdtid=A09000245#

    1 x IWAVER BAND 12 (27.255MHz) FOR ALL MINI-Zs
    http://www.toyeast.com/v2/proddetail2.asp?pdtid=A05000114

    Also don’t forget the tank battlefield pieces on the first or second page…

    Thanks Aaron!!

    in reply to: ToyEast Group Buy! #24205
    jamiekulhanek
    Participant
    • Posts: 2563

    Mocky i said i’d finalise it shortly…

    in reply to: ToyEast Group Buy! #22965
    jamiekulhanek
    Participant
    • Posts: 2563

    Aaron i’m a tad in trouble with debts so i’m just gonna get the transmitter and maybe a crystal set and those tank battlefield accessories…

    I’ll finalise my order shortly.

    Edited by – jamiekulhanek on 02 December 2004 14:35:04

    in reply to: IWAVER TRANSMITTER IS OUT!!! #39462
    jamiekulhanek
    Participant
    • Posts: 2563
    Quote:
    the price is already high… after shipping…

    Cosmo an equivalent radioto that one would cost around $100 USD….

    I think it’s a bargian if it’s any good.

    in reply to: …RC18T REVIEW… #57309
    jamiekulhanek
    Participant
    • Posts: 2563

    The half8 is a 1/16 4wd buggy, i hope it’s much less than half the cost of big brother Inferno MP 777 SP1, which will cost near $2000 to get running……

    in reply to: motors! new plasma dash replacement found for $10 #57308
    jamiekulhanek
    Participant
    • Posts: 2563
    Quote:
    …Dave is right…the above numbers dont realistically translete to use in the Z but the info itself just gives the AVERAGE user a better of what is what and what it does…Anything over a TORQUE TUNED needs a turbo and as far as i know Nelly covers ALL of them and more!! By no strech of the imagine is the above list a PURE document…it IS the list of the information of each motor provided by TAMIYA…Thats all…

    …The prices of these motors is always funky and ebay isnt a great measure-mark because you might have some guy in France who wants one no matter what and the price will go up…another day, and this happened to me last week, the same motor can go for half what the pervious auction did..Jet Dash’s ARE a little harder to get than other motors, especially after TAMIYA changed their names of the motors for the RC 4WD sets…Actually BANDAI has released a SIMILAR toy to the Mini 4WD…looks quite good…but thats another thread…

    Hmmm what i said came out a tad harsh, what i am saying is that the RPM figures go up by a good 60% as do the other figures…..

    in reply to: LXX is dead … long live iWaver! #24298
    jamiekulhanek
    Participant
    • Posts: 2563

    It’s most likely not dead, I have fixed this problem of destroyed/broken pads lots of times.

    All you have to do is trace back from the FET pads to somewhere you can solder a wire (thru PCB pin etc, and solder the wire to the FET stack….easy!

    in reply to: big truck blokes… Sunday 28th PARK ORCHARDS #57305
    jamiekulhanek
    Participant
    • Posts: 2563

    Those big 1/8 Monsters are very cool to watch….might have to invest in one….

    in reply to: ToyEast Group Buy! #24322
    jamiekulhanek
    Participant
    • Posts: 2563

    Hey! All I want is the Tx, the monster truck is just a bonus, if it breaks I’ll just cannibalise it :D:8ball:.

    in reply to: Anyone ordered from Tower Hobbies ? #57285
    jamiekulhanek
    Participant
    • Posts: 2563

    Tower is usually pretty good, just get airmail as snailmail sucks.

    Im not sure if a signature is required upon receival, been a while since my last shipment…

Viewing 25 posts - 201 through 225 (of 2,484 total)