Priest

[Priest]

this really shits me royally dont we have enough bloody problems in this world sheesh are kids thatstupid they think saying sorry is going to make people forgivethem unlikey

aaron take it all the way mate get this little sh!t charged to the full extent of the law and then maybe he might realise the gravity of the situation andwhen the policeconfiscate his computer which they will they will know every site he has tried to hack so they will be able to get him for those as well and you cant tell me this is the ONLY site he has tried to hack.

its a shame he had to ruin his life like this cause he doesnt realise that with a internet crime conviction on his rap sheet he wont be able to gain any sort of employment with any computer related industry so it looks like this kid is going to be a checkout chick for the rest of his life or he will just blow himself up like the rest of the towel heads either way its still going to be a dead end job.

[Priest]

rewiew in a nutshell its a 1/43 scale mini-z. similar front steering and suspension as a z…pot and 1.0 motor 7 steps L/R

drivetrain similar setup as Z and has a h plate although its molded into the chassis and a spring suspension setup that attaches from the rear of the motor mount and then to the body itself

3cells so thats a bonus… twin fets for motor drive and steering control…7 steps forward and reverse no crystal just A/B/C channels 27mhz

the charger is a simple one and it takes 6 AAs or plug it into a power supply
the light are as bright as johnny howard but with a little play may be able to put some decent led’s in there to get some real light of them

ok first thing the instruction are not in english and i cannot translate so that made things a problem from the start but still who really reads them anyway [:)

its pretty zippy for its size and i have to master the steering on it though apart from that im acturly quite impressed by it although i have only had it for about 8hrs so time will tell to see if it survives

Edited by – Priest on 18 April 2005 19:46:18

[Priest]

ive got this charger and have sanyo 900(japan) and charges them in an hour its all good from my end batteries dont get to hot…the charger itself has an in built fan to keep things cool i found the varta ic3’s got extremely hot and after the 15mins charge was finished the fan kept going till the batts were cool enough and shut down so turned out ok got a bit stressed there for a minute other than that im pretty happy with it

[Priest]

Happy Birthday from the West Coast aaron
hopefully the R/C fairy brought you something festive to tinker with.

gotta remember once ya hit 30 theres no lookin back….we oldies know that all to well 🙂

anyways hope you have a great day

[Priest]

i got mine on special from rcfart for $39AUD i acturly wanted the orange and black 260z though they said they were out of stock “oh well” so i settled for the silver fairlady seing as that the only other choice was the old skyline anyway it should be here either monday or tuesday and i’ll try to get some pics of it in action im not expecting much i just thort this was an interesting impulse buy

[Priest]

i got one comming next week i will let ya all know how it goes i got the silver fairlady

[Priest]

dont forget the viagra 🙂

[Priest]

woohoo ph2t put me down for a deluxe please. when they are ready let me know and i will forward the cash to ya

[Priest]

i got the rear from rcmart and got the front from rcxmini.
i find it has made the monster a little heavier though the handling hasnt suffered to much thank god but yes yes diffinately stiffer and takes them knocks alot harder ive also changed the length of mine too which has made it perform alot better and tomorrow ive got alloy oil shocks coming for it too. gpm ones but not the ones for the monster i was looking for a set of alloy shocks around the 50mm area and found them though hopefully they will fit but will update ya tommorrow to see how it goes

heres the front
http://members.ausmicro.com/galleries/5830/F617355DF617355E.jpg

heres the rear
http://members.ausmicro.com/galleries/5830/F65E9E5EF65DF5DB.jpg

[Priest]

ive got both and i tell you they are well worth the money a MUST buy for all monster owners and ph2t when ya nelly’s gonna be ready im wanting a deluxe so i can run lipos in this beast

[Priest]

all my alloy bits are blue so i think orange would look a little off i’ll stick with the blue thankz 🙂

[Priest]

got mine today well lets just say its definately not what i expected a little waste of money though i may be able to mod it though it is just a toy

[Priest]

Yes i totally agree with you there aaron spamming should not be tolerated in any form and if this member is an official party to the other site then send the cheaky pricks a advertising bill.

Edited by – Priest on 14 February 2005 19:57:53

[Priest]

hey guys here the bearing your looking for they fit both Kyosho MZMonster and Iwaver 04 i got them and they are pretty good

http://www.rcmart.com/catalog/product_info.php?cPath=421_108_110&products_id=6115

[Priest]

yeah i was looking at the demio its not to bad though the legacy body will more than likely be for my MZMonster depending on how much modding i will have to do to the car itself maybe a iwaver heart transplant might work not sure till i see it

[Priest]

i mearly wanted it for its shell im after the legacy wagon and maybe later the Odyssey.if its a piece of s**t then it goes in the “parts for later box” 🙂

Edited by – Priest on 08 February 2005 13:49:49

[Priest]

they want $12.90USD for the car and im not sure on postage seeing as i ordered some other parts aswell. all up postage was $17.50USD for shipping 5 items including the tomitech aero.

[Priest]

these are 1/28 took me all bloody night though i found some info over my travels.its looks to me they are another Zclone just tomyised touch wood hopefully mounting the shells on Z’z will be the same or similar. i got one on order so i will let you know in a week or so

Edited by – Priest on 07 February 2005 14:55:24

[Priest]

well ya see my problem is i live an hour from the closest hobby store so if i buy from a lhs its still gonna cost me $20 in fuel so ordering over the net and paying postage is not an issue for me thats why i prefer online cause 1.) dont have to get off ya ass its comes straight to ya door 2.)dont have to deal with moron salespeople trying to sell ya something ya dont want.

and its good to see Aaron is closing in on corning the market for Z’s in Aus now hopefully more west aussies will get into Z’s and i will have someone to race against untill then modify modify modify till it dont break no more

[Priest]

well i can tell ya Atomic, GPM and 3Racing products will always be hot sellers on all platforms.The only thing that bugs me about sites is no Photos of products and no description etc yes i know we should be knowing what we buy though would like to see it first and read a little about the actual product not just what its called.well straight off im chasing gpm alloy servo case and alloy rear gear box for Monster and some 2mm SSG graphite sheet like what 3racing has on their site

Edited by – Priest on 22 January 2005 13:52:49

[Priest]

My 2 Cents
well over the last week ive visited most of the major hobby stores in Perth hunting for local mini z stock and well only one of them in Perth had little stock but i do not advise buying from any of them due to they are excessively over priced and complete ignorance of anything other than 1/10 scale and above(1/28 thats a toy isnt it eh).in one shop i found in their mini z box hidden under the counter a set of original kyosho roll shocks well talk about being bent over the counter and given the royal treatment sheesh they wanted near on $75aus. so if ausmicro can keep the prices down and the product range high and availible well ya got my business if not im just gonna keep on ordering from O/S until the aussie theory of “ripping each other off cause they can” changes cause im sick and tired of this.When are aussie business going to realise that due to the internet we now live in a World market not a local market so they not only have to compete with other local companies they now have to compete with the rest of the World too.so hopefuily now that the ausmicro store is open we will see a nice change to at least the mini z scene here in Aus and maybe we can swing some of these nitroheads over to the darker littler side

sorry for the rant

[Priest]

shoot…i forgot about blasters helmet hmm might have to drag out the green stuff

[Priest]

when you remove the old fets you will see on the board a little white printed square where the fet used to be.. in one corner you will see a little white printed dot now on the new fet you will see a dot in one of the corners just line the up and and solder them in

[Priest]

yeah i tried the ratling though couldnt get it to look quite right so i just made a short trooper out of plastic parts and a bit of green stuff i like it better this way btw the pics arent to good though you will get the idea

sorry here it is the pics http://community.webshots.com/user/wolfpriest

[Priest]

easy fix just use a little right steering to compensate when you jam the power on 😀

[Author]

Posts