betty.k

[betty.k]

nice one baby! but don’t stop there. i wanna see a rifle in the rear window and a deer strapped to the bonnet!! and if you could sort out a “i hunt and i vote” bumper sticker i’d wet myself larfing!:D:8ball:

[betty.k]

very useful:) i was curious about the ratio on my enertecs and now i know! 7.1:1 if you’re wondering:8ball:

[betty.k]

will post something soon:8ball:

[betty.k]

love that profile shot, dat’s one phat baby! can’t wait for the next thrilling installment!:smiley2::8ball:

[betty.k]

nahh, the alloy is from the inside of an old disk drive. i got a box fulla electronic bits and peices. that’s where i get most of my tiny screws from, although i’ve run out of screws for rear shocks, anyone know a good place to shop for tiny screws? jaycar?:8ball:

[betty.k]

i can shoot up to 15 sec of video with this cam but dunno how to put the files up other than emailing people individually. any ideas?:8ball:

[betty.k]

‘nuther idea, how bout a subscribers gallery for uploading pics directly relating to topics such as mods, wiring pics, how to’s, for posting in forums. and i think non subscribers should reap some of the rewards too, ultimately we want everyone to have a better ausmicro experience:8ball:

[betty.k]

aah!:) nothing like the feeling of a successful repair! well done, that’s one of the trickiest repairs to do:dead::8ball:

[betty.k]

i won’t tell ’em if you don’t!:smiley2::8ball:

[betty.k]

i just broke one myself. i used super glue to stick a couple of bits of paper clip wire to the underside. have a look;

http://community.webshots.com/photo/104275236/108455901DpyIUl

the super glue is enough as ph2t suggests, but i just wanted to be sure:8ball:

[betty.k]

yes paw!:approve::8ball:

[betty.k]

aha! nice tip micro, didn’t realise that:smiley2::8ball:

[betty.k]

unwinding a few cm of the wire won’t affect steering. it’s only if you unwind lots like half of it that you mess it up. just remember to scrape a little of the enamel off the end you’re soldering:8ball:

[betty.k]

generally i’ve found that ‘L’ on the pcb means the right hand coil and ‘R’ goes to the left coil:8ball:

[betty.k]

it went off with a bang over here!:8ball:

http://community.webshots.com/photo/104137037/107906171zxHfFh

[betty.k]

or you could do what i did. black electrical tape.
http://community.webshots.com/photo/106374225/107574312hDfZsh
after the glue dried i painted the backs of the led’s black and put more tape over them:8ball:

[betty.k]

i’d be happy to contribute. you could offer stickers for bcg’s, have an annual subscriber drive with prizes, maybe more gallery space. and a board game and cubic zirconia keyring!:D:8ball:

[betty.k]

very tidy job on the citroen, and nice grafix on the focus!:smiley2: vive le rally!:8ball:

[betty.k]

g’day soopergooman!:smiley2: welcome aboard.
if you want fet mods, go to micro amps fet mod page:

http://members.dodo.net.au/microamps/index.htm

everything you need plus more. hope that helps:8ball:

[betty.k]

completely finished now!:smiley16:handles beautifully, tracks straight and loves the rough. enjoy!
http://community.webshots.com/album/106374225qKMhHE:8ball:

Edited by – betty.k on 01 January 2004 05:54:53

[betty.k]

hey, nice tip! i’ll be doing a little lock destroying now!:8ball:

[betty.k]

a couple of things i should mention about suspension in use.

1/4 of your suspension travel should be taken up as ‘sag’ sag is the amount a shock compresses when the vehicles full weight is applied. eg; when you get on your mountain bike with suspension, 1/4 of available travel should be used up.

‘bottoming out’ is when your spring is compressed as much as it can be. this should happen regularly but not often. if your suspension never bottoms out, then back off the preload.:8ball:

[betty.k]

MY DDS tape!:D
woo hoo!:p:p i done it!

http://community.webshots.com/album/106374225qKMhHE

and i figured out how to use the macro setting on my borrowed digi cam, so the pics look good for a change! the preload is adjustable but no damping. if i need to i can just put a little glue in the shock pivot to slow it’s movement. still waiting for springs for the front but til then i just did the springy sway bar mod. in the end i couldn’t mount the shock on top because the motor got in the way but it works just fine the way it is so i’ll leave it. the widened wheelbase works well at keeping it upright and makes it look phat! so i just gotta put springs up front, make new tyres and sort out a shell. hopefully the pics explain the mod better. gotta go now, feel the need to burn rubber (or should i say warm some vinyl!:D):8ball:

Edited by – betty.k on 29 December 2003 03:44:01

[betty.k]

i’m not sure what you mean by ‘pulse’:8ball:

[betty.k]

ok thanks. rage, janes, they all look the same to me!:8ball:

just watched the vid. coolness! goes just as fast as mine. and looks like we experience the same amount of rollover. you gotta get it into the dirt now and try a little circle work!:8ball:

Edited by – betty.k on 29 December 2003 04:14:49

[Author]

Posts