Admin

[Admin]

cheer, i’ll do just that, pull the bugger through and make a hole near the fuselarge and boom, then run it out from there.

[Admin]

Might as well add the info here, instead of starting another thread..

I fixed the steering twitchin on an Iwaver 02m which got worse when i installed the spider turbo and the plasmatomic motor (too much drain)..

my fix: i soldered a 102 cap between the pos and neg on legs that the plug goes on for the servo.

solved my twitching problems for good, now shes controlable. 😀

[Admin]

3 M18T’s, 4 Vendetta ST’s, 2 RC18T’s, 1 Exotech18T, 1 GB01, 1 IBSpyder, 9 Mini-T’s, 2 Chinese copycat RC18T’s, 3 M18, 1 Micro RS4, 1 Ratzas RS4, 1 Scalpel, 3 Micro-T’s in our area that I know of. Just beginning to get our racing organised. Have the track (see vid link). RCLapcounter system on its way.

http://youtube.com/watch?v=YG4O_EPKW6U

http://youtube.com/watch?v=aSJ1RtejoUk

Cheers

[Admin]

Cheers Aaron for the pdf link, had a gander last night and the board looked very similar to Kyosho MR01/MR02/Overland/Monster. So with that and the generic instructions, got it installed, but coundnt test as i only had flat batteries.. :gatlin: just need some 103 caps and i’ll drop in the plasmatomic motor n get it on the track. :approve:

Thanks hakhawk for addin the info 🙂

[Admin]

Hi Guys, I thought this is probably the best place to let you know about racing in Bendigo this Thursday night (Oct 18) in the function room of the Bendigo Baptist Church. We run 01 and 02 cars with a range of speed and skill level. We have lots of fun, others are welcome to join us, send me a message.
Pete

[Admin]

i dont know about the 7 steps part as i dont really know enough about it. i do have one though. i got a lan evo VIII.

[Admin]

@Pork_Hunt 226245 wrote:

Welcome aboard Trinity, I’m pretty sure G10 is the fibreglass sheet that circuit boards are made from

Hi Pork_Hunt,

yes it was what I was thinking too but I prefer ask before say something wrong 😀

It was the only ‘strong stucture’ on a circuit board hard enough for make a chasis with…

Thanks!!!

[Admin]

:worship:

But if it’s the retailer I mean, it would cost a lot (and with shipping costs to France :huh: )

But I searched G10, what is that for material??? I find some Website who talk about eletronic and G10 in the structure but that doesn’t advance me :confused:

And don’t you think to make it with carbon?

[Admin]

Hi,

Then you have a CNC and mill the chassis yourself… Interessant! Very Interessant :clap: !!!

1st Ticket on your chassis 😀

Heuh at 1st how much??? You can email me to give me your quote :smiley2:

Thanks a lot

[Admin]

Thanks a lot for your very fast answer!!!

yes it’s seems to look like as but I’m not sure you can that with Autocad or?

[Admin]

Hi,

very very nice chassis 😀

I’m new on this forum and I dedicate you my 1st reply :beer:

What are you using for programme to do this?
Thanks

[Admin]

Hi Berni
Just finished my MR02 AD Band with 3×2 with Atomic T2 motor.It is faster
than the one has 3×2 (4562 Fet). It has very smooth in between speed control
not like the one with 4562 Fet.
Do you still have the Fets? I need some more for another AD Band AWD and
some AM PCB and also need some for spares. I’m looking for 20 Fets. Thank
you.

Best regards,
Wing

so he ORDERED 20 MORE!! (10 in June, 20 this month=30 TOTAL)

http://www.geocities.jp/nucorp_r/miniz.html

[Admin]

Another thing I wanted to know is if you have a scale to weigh the chassis?

[Admin]

hi i own an e-maxx. they have all the maxx upgrades. i use it as a ‘all’ purpose truck. after i got used to maintaining it i got an xtm x-factor-2 i love this also. tuning was hard to put up w/, but it is a big SPEED than my stock e-maxx

[Admin]

Thanks for the detailed pics! Are those side springs oil fillable? I’m wondering if that type of rear suspension is gonna be any good. I know they weren’t for the that great for the mr-02s

I’m still confused on how well the rear suspension tuning will work on the 02m. does that bottom chassis plate allow the rear end to have up and down movement? Any chance of you testing the car on an RCP track?

[Admin]

Hey Man thanks for the help!

I was looking in the wrong place. The install instructions used to be in the section where the spiders were sold. If I would have just looked at the top of this thread your awesome install notes were CLEARLY visible.

New to this forum and just a dumb noob error.

Thanks for not flaming and steering me in the right direction!

One question though. The old instructions made it seem that it was extremely critical to connect the spider power lines directly to the battery terminals. From my knowledge of electronics there really should not be any loss routing power your way. Have you noticed anything using your method?

Thanks!

NC out

[Admin]

@ rcs2die4

I have installed several Spider2s on AWDs and cannot figure out how you are running the motor wires from the Spider. It looks like they are connected to the orginal Mini-Z PCB. I have always run the Motor wires from the Spider to the motor using a quick disconnect. Also, how are you are running the power wires to the Spider. I have always soldered them to the power clips from the chassis. Are you just screwing them in with the original chassis to PCB gang under the PCB?

Thanks!

[Admin]

Can ayone give me please a Tracklist around Melbourne.
So I can give my Mini-Z racer a drive.

[Admin]

well the thing is that i want to keep the all the xmod electronics to function the same way but somehow manage to use the speed control like a extrernal turbo, I dont want the hassel of finding other components like a micro receiver or a servo, i want to be able to work with what i got!!!!

[Admin]

Looks Good for your first better then my first! Keep up the good work :laser:

[Admin]

OMG… this thing is a rocket, I installed this in my overland, with a PN Anima motor, with 1000Mah Tenergy batteries, with high torque gears. It does wheelies forever until you let go of the trigger. I LOVE IT! My camera has a dead battery i’ll get pics up ASAP!

[Admin]

thanks for the tutorial! Also about step 6 for the motor wires, what did you use to scrape off the green stuff? Is it possible to get a good connection without scraping it and soldering the wire across all of those previous fet pads?

[Admin]

hey my kid bro jus took my mini r/c car apart n i dont know which wire goes where…….im a rookie!!!!!!help!!!!!….need ur help….guys o gals……..pls help….

[Admin]

Thanks for the pictures, I’m actually planning on running it on my overland, since my AWD and MR02 have fets already installed. Your install is nice and clean, i’ll post some pics after i’m done.

[Admin]

Can anyone post any pictures of it installed? I just purchased one, hasnt arrived yet but wanted to see how some people installed it.

[Author]

Posts