z-beam

Forum Replies Created

Viewing 25 posts - 1,851 through 1,875 (of 2,167 total)
  • Author
    Posts
  • in reply to: the source of the matrix #36854
    z-beam
    Participant
    • Posts: 2265

    another funny thing: a new movie with sean connery and every other dog in hollywoods coming out soon, sort of a cross between matrix effect and gangs of new york, it’s called LXG

    lx(x-char)g….

    o.k so this has nothing to do with relevance…
    shypo whats the bad guy in the hulk movie?

    in reply to: bit keep tipping over #36853
    z-beam
    Participant
    • Posts: 2265

    coil your antenna on the car up and place it under the shell, if this don’t work consider getting both a tire kit and tomy suspension set.

    2more ways to fix: champagne bottels have lead wrappers, these are thin sheets of lead. you can use it to lower the center of gravity of your car without interfering with the magnetic steering/propulsion systems. smooth and glue layer by layer onto the bottom of the chassis. NOT to much tho, you will hinder your bits accel. but in corners the extra weight (if you have enough speed) will carry you through.

    2: remove the white sway bay and carefully remove the tiny bit of plastic that stops the bar from being able to be reversed, reverse it so that the nuckles are held down intead of loose.

    in a corner the reversed sway will stop the car from “tilt” factor.

    in reply to: Age of BCG Users #36852
    z-beam
    Participant
    • Posts: 2265

    jamie what do you mean “it only had four wheels”
    are you refering to the rediculous rc vehicles on the market that have 5 wheels?:dead:

    HAPPY BIRTHDAY DJINN

    in reply to: moment of silence for my bit #36851
    z-beam
    Participant
    • Posts: 2265

    oh yeah! and you can switch the controller into 2 extra modes/frequency. a is for standard bits and clones, b is for boost and c is for constant.

    c channel allows you to race a booster at full pace without using the boost button, i still havn’t broken wipeout airbrake programing in my head yet (thinkin boost is brake).

    booster machine sets are the way to go, i’ll never regret getting the controller and chassis ever.

    in reply to: I Went Micro Krazy This Weekend…… #36850
    z-beam
    Participant
    • Posts: 2265

    especially from a direct retailer.

    in reply to: Wich mini RC do i have? #37129
    z-beam
    Participant
    • Posts: 2265

    only special battery supplyers usually have the right size, 1/3 aaa.

    in reply to: 2.6 faster than 3.0 #37128
    z-beam
    Participant
    • Posts: 2265

    because you dont know which motor is which probably. is the Auto modelista set tomy or cloned material? i found that my booster don’t like certain motors, it makes noises when it takes off without the boost button with a pink nanoracer/cyclona motor.

    in reply to: Booster machine #37127
    z-beam
    Participant
    • Posts: 2265

    it has holes near the doors like a contach, and the front end is odd but it races quite well and holds momentum cos of the extra weight on the lower nose.

    in reply to: moment of silence for my bit #37126
    z-beam
    Participant
    • Posts: 2265

    exactly,

    in reply to: What About !LOOK ADMIN! #37122
    z-beam
    Participant
    • Posts: 2265

    not really considering we would have at least 3 potential fanatics in each capital city, a webcommunity that will support customers after we are gone, buisnesses that needs exposure and an outlet for there goods. got a weekend spare?

    that would be the ultimate for ausmicro but i think a cabinet display of 2 decent modded shells and an ausmicro decaled car in every hometown toystore would be a sure beginning.

    in reply to: Do you think? #37120
    z-beam
    Participant
    • Posts: 2265

    i told them that 2. made no difference tho…

    in reply to: New Bit Char-G’s (boosters?) #37116
    z-beam
    Participant
    • Posts: 2265

    compared to the supra pullback shell(GLOSSY) the gt is matt as.

    in reply to: New Bit Char-G s (boosters?) #45515
    z-beam
    Participant
    • Posts: 2265

    compared to the supra pullback shell(GLOSSY) the gt is matt as.

    in reply to: What About !LOOK ADMIN! #37114
    z-beam
    Participant
    • Posts: 2265

    the race part is impossible, are u going to fly over to the states for a race?

    the ideas and help is very handy tho.

    it would be amazing publicity to do a run of the west feildshopping centers with a table top curcuit, done up racers and ausmicro advertising/sponsorship, clones for sale….

    kitty’s shirts could become ausmicro uniform…

    be fun hiring some beefcake security to bust THEIFS

    put it all into a neat package and i think we would be on to something.

    in reply to: New Bit Char-G s (boosters?) #45513
    z-beam
    Participant
    • Posts: 2265

    has anybodies gtr2000 shell s paint job look cracked at all, it’s not bad it just looks “old”.

    in reply to: New Bit Char-G’s (boosters?) #37108
    z-beam
    Participant
    • Posts: 2265

    has anybodies gtr2000 shell’s paint job look cracked at all, it’s not bad it just looks “old”.

    in reply to: admin is cranky… #39845
    z-beam
    Participant
    • Posts: 2265

    in otherwords:
    DR.evo sent a secret weapon into agent aarons office, the resulting chaos/logicbomb created ADMIN who vanquished the evil dr.evo WITHOUT hurting OR hindering DR.evo’s ppl in any way. thus we have our reborn reality to commune in.

    z-beam is a happy member.

    thank you admin for fighting the EVILS

    in reply to: Do you think? #37107
    z-beam
    Participant
    • Posts: 2265

    i seen some one cut a ‘uge star on there chest with one and he healed it without a trace within 3 months. pretty messy!!!!

    another sad tale is of old sl*ddo, drunkenly inscribing the name of the dead metalica bassist “cliff” on his Knee.:clown::D:question:

    (all respects to cliff burton R I P)

    in reply to: moment of silence for my bit #39850
    z-beam
    Participant
    • Posts: 2265
    Quote:
    also…have you ever visited tinyrc.com ? that place is a bit livelier then this forum so you might get more responses faster when you post there.

    BAR YOU NEWCOMER,go home to the “lively place” and stop bagging us .

    in reply to: the source of the matrix #39849
    z-beam
    Participant
    • Posts: 2265

    who’s the evil bad guy?

    marvel seems to have finally worked out there 21st century product.

    did you like spider-man?

    in reply to: LWB Hummer Report…… #37207
    z-beam
    Participant
    • Posts: 2265

    super chibi! is that the word for it! i wonder how much bit charg oz will sell them for?

    in reply to: Help to indentify clone motors #37206
    z-beam
    Participant
    • Posts: 2265

    gt which clone? i got 2 pink nanoracer motors that look similar and they are easy a 2.8 if not more. hard to tell tho cos i dont have a lucy (3.0) to compare with.

    in reply to: New Bit Char-G s (boosters?) #45508
    z-beam
    Participant
    • Posts: 2265

    canary yellow mmmmmmmmmmmmmmmmm

    in reply to: New Bit Char-G’s (boosters?) #37205
    z-beam
    Participant
    • Posts: 2265

    canary yellow mmmmmmmmmmmmmmmmm

    in reply to: Do you think? #37204
    z-beam
    Participant
    • Posts: 2265

    yeah all seats in cars are stuck to the floor and there IS curcuitry in the way. sux sux sux.

Viewing 25 posts - 1,851 through 1,875 (of 2,167 total)