z-beam

[z-beam]

This way my screwdriver still has some “precision”

genspec whats that supposed to mean????:smiley13:

[z-beam]

i got the same prolem. is yours a compact 40mhz?

i’m going to swap my orange buttons for blue oem ones.

[z-beam]

i salvaged the dual nimh battery pack and split it for 2 separate 1.2v batteries. the motors quite cunky but it has 2 wires (1 black 1 red) coming out the end, has any body worked out how to adapt the motor?

didnt bother fixing mine as i already own 2 official bcg’s, the steering doesnt work properly because of the plastic chassis being to long and the steering nuckles not being big enough.

[z-beam]

trueno, what freq. is the auto modelista booster?

[z-beam]

very jelous i am.

how fast is the ruski tank compared to a bit charg with a 1.0, 2.2 or 2.6.

[z-beam]

if the actual tires are catching then u need to cut the inside of the body away using fine sand paper or a blade

[z-beam]

havn’t had any probs with the 1.0 if you want to go slow then try these. alternatly whack a 2.6 in her bit when she is not looking get her to think its a 2.2 and then tell her if she wants to go slow to use “the yellow one”.

the kit racer axles will slow down a 2.2 quite a lot as well

[z-beam]

trueno yor girlfriend likes bits 2?!!! since modding my skyline she wants a pink s2K and now considers getting a bodykit on her holdenvectra

[z-beam]

i already told you 50$aus for 2x 1.2v nimh batteries and they have already been joined together for torbo fun

[z-beam]

dodgy means to be avoided. or that the person cant be trusted as they cannot be honest. like the word shifty.

good luck!!

[z-beam]

Nimh is the phuture of bitchargin’

[z-beam]

Nimh is the phuture of bit chargin’

[z-beam]

otherwise your bit is a fatt bitch( ar-g)

[z-beam]

e=(mc)2

light is energy and when light energy hits a solid it reflects and a portion and the rest is transferred into heat. also if your not using rechargable batteries the cell uses decay to release electrons. that also gives off heat. flashing lights? magnetic fields!id bet you money that would affecty signal.

the point is caine, do you want a showbit, turbobit or a racebit because face it arn’t they different things. dont they each deserve their own even playing feild?

i’d love a showbit with all those lights fitted but fixing it up with dual cells and giving it lots of cosmetic attention is hard to justify. no more table top racing( be to easy to fall of the cliffs)

[z-beam]

shypo are you using a turbo bit? (dual cell mod)

[z-beam]

i shaved one edge of the motor bay so that i could fit the 6 or the 7 spoked pinion gear. before it wouldnt work for the same reason.

by the way does the special edition come with an eight spoked pinion gear? i bought an oem special edition rx7 that had 3.0 motor and pink gears that give awesome top speed.

[z-beam]

:smiley6:they wont send to me.

what freq. is thered mustang

[z-beam]

2 true.

then why does australia only get 40 and 27 mhz.

[z-beam]

i have a game for ps2 called splashdown by atari, its a seadoo racing game and has some seriously good indoor tracks. sub-g racing!!! cant wait

[z-beam]

my freind is visiting san francisco next week. you wouldnt happen to know where he could find them( considering hes never been there) . zipzaps that is?

[z-beam]

serial number? dont think so…. forget dick smith, unless you want to pull apart a $50 car for two of them

[z-beam]

go check out qfm!!!!

not any hammer!!! i got a little hammer with a set of precision screwdrivers and i used it and a pair of sharp nosed tweezers to slowly knock them out.

you need small tools for small cars!!!!

ask if you need tell if you know.

[z-beam]

panda, did u put the coin on top or under the shell?

[z-beam]

J? flying leads?

[z-beam]

to make my hotswaps i had to cut the wheels off an orange axle and unfortunatly there are ridges anong the axle. pull that wheel off and i assure you it will be a bitch 4 life. the gear was made on the axle so you could use a highly viscous superglue like zzap. in that confined space it’d work good

[Author]

Posts