z-beam

[z-beam]

2 true.

then why does australia only get 40 and 27 mhz.

[z-beam]

i have a game for ps2 called splashdown by atari, its a seadoo racing game and has some seriously good indoor tracks. sub-g racing!!! cant wait

[z-beam]

my freind is visiting san francisco next week. you wouldnt happen to know where he could find them( considering hes never been there) . zipzaps that is?

[z-beam]

serial number? dont think so…. forget dick smith, unless you want to pull apart a $50 car for two of them

[z-beam]

go check out qfm!!!!

not any hammer!!! i got a little hammer with a set of precision screwdrivers and i used it and a pair of sharp nosed tweezers to slowly knock them out.

you need small tools for small cars!!!!

ask if you need tell if you know.

[z-beam]

panda, did u put the coin on top or under the shell?

[z-beam]

J? flying leads?

[z-beam]

to make my hotswaps i had to cut the wheels off an orange axle and unfortunatly there are ridges anong the axle. pull that wheel off and i assure you it will be a bitch 4 life. the gear was made on the axle so you could use a highly viscous superglue like zzap. in that confined space it’d work good

[z-beam]

the yellow engine is a 2.2. i know cos i have a 1.0 to compare it to. poor buggers in japan! a 2.2 goes about 2.2 times faster than a 1.0, and most other bits (import) come with them as standaRd. jnh toys new ozzies wouldn’t have liked going granny pace in their S2000s and Skylines.

what type of batteries do u use?

[z-beam]

u know what i mean jamie. is it the gear side or not?

[z-beam]

thanks.never been into anything vehicle related before gt A-spec on ps2

[z-beam]

already said that i used superglue to stick it in place.

a rev limiter is what i need. the effect i was after was like traction control

[z-beam]

forgot to mention the 2.6:smiley14:

please inlighten us bit heads how did you true the real axle and what is arev limiterand a line locker.

[z-beam]

thanks chris. cant you ‘member the tanks? i’ve still got one of the plastic kits cos when i was six i thought the jets looked like girls!

[z-beam]

yeah but not toloose. i recon if you could control the slip factor by using some substance that is smooth untill u aply a certain amount friction u might get good results.note that the spur gear loosened to spining on the axle but it did not slide off its position

[z-beam]

sorry that wont work as the beam will bounce off the glass around the room untill it hits the tv

[z-beam]

icould see them fitting 1.0 motors in them with a battery but guided fireing torpedoes would cost 2 much. does ir work thru water?? anybody got a fish tank and a tv to experiment?? just try and turn on the tv thru the fish tank.

[z-beam]

check mod limit in tech section. my dream skyline has cost me 145$aus.

no way you can fit all those light mods. and the heat they’d make(without the turbo) would hurt the battery

[z-beam]

certain lighters(bic i think) have hrd springs in them u have to strech the spring to permanatly lessen the diameter of it.

cain dont you race on tiles some times? adding medium length afx springs stops the car from flipping and loosing its orientation at every bump.

independant suspension is what its called. i only use the bar with springs because my skyline sits 2 mm off the ground.

[z-beam]

bring on the varitech tanks!

saw some remote airship/zepplins on the net recently the site also has optional cameras that can be picked up by tuning your tv to a particular freq.

[z-beam]

something (not so) big is just around the corner, lets hope it comes soon.

doesnt tomy make zoids? they are robotic animals i used to own as a kid that they are producing again. if only tomy would forget tanks and build the worlds first customisable battle mech’s we could all rejoice. the mechwarrior licence must be cheap as k’nex (sh*tty lego) have released a 4 mech series that are apalling.

imagine having robot monster chasing your bit!

[z-beam]

Take the bit(ch) back to where u bought it!

[z-beam]

dick smith had them in their catalog, i bought it at a toy kingdom for $49.

just finished splitting the battery so both my bits are NiMH powered. you know how the last 15-30 seconds of charge slowly fades on ni-cad? the NiMH goes strong on a double charge for at least 8 mins and then stops. emtying the risidual power takes a quarter of the time of ni-cad.

also the wrx had a switch to turn it of on the car NOT the controller. hope i could help!

[z-beam]

how much fragin paint did u use lothar!? I have a set of scales for gemstones so i know how muchmy skylineweighs exactly, 23.8grams .when i bought it it’s weight was 22.0gms. with the yellow 2.2 motor that came whith your bit i dont think your lack of speed has anything to do with paint, thats unless your an ork,”red makes ya go fasta” or “whoopsi drowned it”.

What sort of batteries did u use first go?

[z-beam]

lothar grab a hot wheelskit racer set from k mart with an orange motor for 25$. the shells come in handy for bodywork and one of them (silver) has number plate stickers.

ultramarines and tyranids are my thing. the salamander badge icon and space wolf simbol are some good ideas .

[Author]

Posts