jamiekulhanek

Forum Replies Created

Viewing 25 posts - 1,826 through 1,850 (of 2,484 total)
  • Author
    Posts
  • in reply to: Using an ‘intellipeak’ charger…… #21859
    jamiekulhanek
    Participant
    • Posts: 2563

    Yeah it does charge single cells, i just hafta take the battery out of my bit char to charge it.

    My charger has:

    -1-32 cell charging capacity.

    -100mAh-8000mAh charging current.

    -RS 232 Serial port (connect to PC and view charge curves/graphs and cell information)

    It charges NiCad, NiMH, Li-ion, Lit-Tadiran, PB leadbatt, and has Discharge, soft charger, multi-delta peak modes, basic charger, reflex charger, cell regeneration/reformat mode and more.

    in reply to: Using an intellipeak charger…… #46781
    jamiekulhanek
    Participant
    • Posts: 2563

    Yeah it does charge single cells, i just hafta take the battery out of my bit char to charge it.

    My charger has:

    -1-32 cell charging capacity.

    -100mAh-8000mAh charging current.

    -RS 232 Serial port (connect to PC and view charge curves/graphs and cell information)

    It charges NiCad, NiMH, Li-ion, Lit-Tadiran, PB leadbatt, and has Discharge, soft charger, multi-delta peak modes, basic charger, reflex charger, cell regeneration/reformat mode and more.

    in reply to: Using an ‘intellipeak’ charger…… #21857
    jamiekulhanek
    Participant
    • Posts: 2563

    Mine is a different one, called an Orbit Microlader.

    in reply to: Using an intellipeak charger…… #46779
    jamiekulhanek
    Participant
    • Posts: 2563

    Mine is a different one, called an Orbit Microlader.

    in reply to: remotes #21853
    jamiekulhanek
    Participant
    • Posts: 2563

    I often had problems with batteries in my mini z tx, they sometimes lost connection, the power was restored with a quick bash on the controller.

    in reply to: A/B/C/D… frequencies?? #21775
    jamiekulhanek
    Participant
    • Posts: 2563
    Quote:
    TOMY Japan has delivered BitHed an ‘official’ warning to the words of…’SOME frequencies are not able to be sold OUTSIDE of Japan due to the fact that are illegal so be careful…”

    We ‘officially’ replied…’Gees dude… Like… Give a sh*t…”

    BitHed has spoken 🙂

    Bahahahahahahahahahhaha!!!! Good one bithed 😀

    Its stupid, those TOMY Tx’s have crap-all Tx Power, so like it matters.:dead:

    in reply to: new pinion #46735
    jamiekulhanek
    Participant
    • Posts: 2563

    There is a fine line between overpowered and perfectly set up, I like my cars to have a good balance of speed, acceleration, handling and balance.

    Thats fine though, ur a typical American.

    in reply to: Pre Order Your Chassy #21773
    jamiekulhanek
    Participant
    • Posts: 2563

    The Question is, will you send us the goods??

    in reply to: x speed motor and fets #21772
    jamiekulhanek
    Participant
    • Posts: 2563
    Quote:
    how fast does 6x fets with an x speed motor go roughly?…would it exceed 45 km/h?

    Nah sorry mate, try buying a tamiya plasma dash if you want speed.

    An x speed with 6×2 fets would be no slower than one with 10×2 fets.

    It only matters how many fets you have when you start dealing with big power, however an upgrade to 2×2 or 3×2 will see more power and speed from an x speed motor, only because the standard FETS are McBullsh*t and can only JUST handle the x speed motor.

    With A fet mod, 9-tooth pinion, and x speed, expect around 30km/h.

    in reply to: remotes #21771
    jamiekulhanek
    Participant
    • Posts: 2563

    Hmmm have you ever tried a pistol transmitter?? You might find after trying one for a while that you quite like it.

    They seem to make driving the car a lot easier than using a stick transmitter.

    in reply to: oil problem #21769
    jamiekulhanek
    Participant
    • Posts: 2563

    Oh sure, I’ve got some of that tamiya grease, and it is great stuff, but for carpet racing, it only helps to pick up crap.

    Graphite has even less drag than ceramic grease (More power at the treads), and once applied, prettymuch stays there for an eternity.

    in reply to: 2 battary mod problem #21766
    jamiekulhanek
    Participant
    • Posts: 2563

    You all seem to be headin’ in the right direction 🙂 A 4 cell pack connected to the car seems to work best, keep it connected for about 2 minutes and you will have a lovely long runtime :smiley16:

    in reply to: 2 battary mod problem #46733
    jamiekulhanek
    Participant
    • Posts: 2563

    You all seem to be headin’ in the right direction 🙂 A 4 cell pack connected to the car seems to work best, keep it connected for about 2 minutes and you will have a lovely long runtime :smiley16:

    in reply to: anyone my place? #21765
    jamiekulhanek
    Participant
    • Posts: 2563
    Quote:
    Quote:
    …look up the atlas book where is that tiny country called malaysia

    … or watch ‘Zoolander’… :D:D:D

    imho T’is lucky that the Yanks don’t know where some countries are.
    They just discovered where AFGHANISTAN is, and look at it now… :dead:

    Then they re-discovered IRAQ, and the fact that it has a nice supply of BLACK GOLD……..now look at it……:p

    in reply to: anyone my place? #46732
    jamiekulhanek
    Participant
    • Posts: 2563
    Quote:
    Quote:
    …look up the atlas book where is that tiny country called malaysia

    … or watch Zoolander’… :D:D:D

    imho T’is lucky that the Yanks don’t know where some countries are.
    They just discovered where AFGHANISTAN is, and look at it now… :dead:

    Then they re-discovered IRAQ, and the fact that it has a nice supply of BLACK GOLD……..now look at it……:p

    in reply to: anyone my place? #21763
    jamiekulhanek
    Participant
    • Posts: 2563

    Yeah good point. I went on a holiday a few years back to the US of A, and my family and i were positively stunned, by the lack of geographical knowledge of the US citizens.

    I.E. When we told them we were from aussie they asked:

    “Do they have cars over there??”

    “Do you live in the desert??”

    “Do you ride kangaroos to school??”

    When we told some of them we were from Tasmania they instantly thought it was in Africa or maybe in the Middle East!

    Just my 2 cents worth……:):D

    in reply to: anyone my place? #46731
    jamiekulhanek
    Participant
    • Posts: 2563

    Yeah good point. I went on a holiday a few years back to the US of A, and my family and i were positively stunned, by the lack of geographical knowledge of the US citizens.

    I.E. When we told them we were from aussie they asked:

    “Do they have cars over there??”

    “Do you live in the desert??”

    “Do you ride kangaroos to school??”

    When we told some of them we were from Tasmania they instantly thought it was in Africa or maybe in the Middle East!

    Just my 2 cents worth……:):D

    in reply to: Jaycar Clones #21762
    jamiekulhanek
    Participant
    • Posts: 2563

    Were they in a plastic ‘bullet’ shaped dome??

    in reply to: Battle tanks #21761
    jamiekulhanek
    Participant
    • Posts: 2563

    The digi Q tanks hover around the $150AUD Mark.

    in reply to: Should VR-4 have english lessons? #21759
    jamiekulhanek
    Participant
    • Posts: 2563

    I have long since given up trying to read his posts.

    in reply to: new pinion #46723
    jamiekulhanek
    Participant
    • Posts: 2563

    I bet ya it doesnt last nearly as long.

    in reply to: Jamie FETs #21751
    jamiekulhanek
    Participant
    • Posts: 2563

    Feeling Generous?? j/k ive got a pack of 12 coming today hopefully.

    in reply to: congrats to ph2t!! #21698
    jamiekulhanek
    Participant
    • Posts: 2563

    Im gonna enter next time.

    How about an ausmicro competition??

    With Bits/Mini Z’s???

    in reply to: oil problem #21697
    jamiekulhanek
    Participant
    • Posts: 2563

    Use graphite powder, it has virtually no drag, and as it is a powder, it doesnt get sh*t stuck to it.

    in reply to: Problem with range #46690
    jamiekulhanek
    Participant
    • Posts: 2563

    Yeah i made a set of underbody neons, and they shorted on the antenna, and literally coocked my mini z, but the sweet spot trick fixed it up all good.

Viewing 25 posts - 1,826 through 1,850 (of 2,484 total)